From: Christoph Egger <christoph@christoph-egger.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] MMC boot / mvebu / clearfog
Date: Sun, 02 Oct 2016 22:21:03 +0200 [thread overview]
Message-ID: <87d1jibiz4.fsf@hepworth.siccegge.de> (raw)
Hi!
MMC boot on the ClearFog (base) still seems to fail (uart boot works
fine apart from uart detection). The SPL seems to finish successfully
and jump to u-boot but there is no further output then. I'm trying to
enable even more `DEBUG` but help is indeed welcome!
Regards
Christoph
=================================================================
spl_init()
U-Boot SPL 2016.09-dirty (Oct 02 2016 - 22:04:41)
High speed PHY - Version: 2.0
Detected Device ID 6828
board SerDes lanes topology details:
| Lane # | Speed | Type |
--------------------------------
| 0 | 3 | SATA0 |
| 1 | 0 | SGMII1 |
| 2 | 5 | PCIe1 |
| 3 | 5 | USB3 HOST1 |
| 4 | 5 | PCIe2 |
| 5 | 0 | SGMII2 |
--------------------------------
PCIe, Idx 1: detected no link
PCIe, Idx 2: detected no link
High speed PHY - Ended Successfully
DDR3 Training Sequence - Ver TIP-1.29.0
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
DDR3 Training Sequence - Ended Successfully
BOOTROM_REG=0xe7001000 boot_device=0xe
SAR_REG=0xdb00331e boot_device=0x31
>>spl:board_init_r()
BOOTROM_REG=0xe7001000 boot_device=0xe
SAR_REG=0xdb00331e boot_device=0x31
Trying to boot from MMC1
sdhci_transfer_data: Error detected in status(0x408000)!
spl: mmc boot mode: raw
hdr read sector 141, count=1
mkimage signature not found - ih_magic = e1a0000d
read 190 sectors to 800000
Jumping to U-Boot
SPL malloc() used 0x394 bytes (0 KB)
loaded - jumping to U-Boot...image entry point: 0x800000
--
9FED 5C6C E206 B70A 5857 70CA 9655 22B9 D49A E731
Debian Developer | Lisp Hacker | CaCert Assurer
next reply other threads:[~2016-10-02 20:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-02 20:21 Christoph Egger [this message]
2016-10-22 0:22 ` [U-Boot] MMC boot / mvebu / clearfog Christoph Egger
2016-10-22 0:38 ` Christoph Egger
2016-10-24 13:47 ` Christoph Egger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87d1jibiz4.fsf@hepworth.siccegge.de \
--to=christoph@christoph-egger.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox