From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vagrant Cascadian Date: Thu, 30 Apr 2015 14:26:55 -0700 Subject: [U-Boot] [PATCH v2 2/4] mx6cuboxi: Add USB host support In-Reply-To: <1430357292-8062-2-git-send-email-festevam@gmail.com> References: <1430357292-8062-1-git-send-email-festevam@gmail.com> <1430357292-8062-2-git-send-email-festevam@gmail.com> Message-ID: <87d22lux28.fsf@aikidev.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 2015-04-29, Fabio Estevam wrote: > Enable USB Host1 port. > > Signed-off-by: Rabeeh Khoury > Signed-off-by: Fabio Estevam > --- > Changes since v1: > - Remove USB ether options as suggested by Tom Removing those options broke network boot. With this patch, u-boot reports: Net: Phy 0 not found And the dhcp command fails to get an ip address. With both CONFIG_USB_HOST_ETHER and CONFIG_USB_ETHER_ASIX defined in mx6cuboxi.h, u-boot reports: Net: FEC And then the dhcp command works as expected... Perhaps the CONFIG_USB*ETHER options conditionall enable some other feature that FEC depends on? live well, vagrant -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 818 bytes Desc: not available URL: