[U-Boot-Users] [RFC][PATCH 1/1] Add board_eth_init() function

["Markus Klotzbücher" <mk@denx.de>]

Stefan Roese <sr@denx.de> writes:

> On Saturday 22 March 2008, Wolfgang Denk wrote:
>> In message <200803220731.23229.sr@denx.de> you wrote:
>> > I would prefer to move this init code not into the board code but into
>> > the platform/cpu code. Speaking for PPC4xx, here all configuration I know
>> > of have the same init code. And copying this into all board ports instead
>> > on one place in the cpu directory seems "imperfect".
>>
>> But the ethernet configuration *is* actually bord dependent. A  board
>> may  or  may  not  use  all  the  ethernet  interfaces  present  on a
>> processor, or it may have additional network controllers attached for
>> example to the PCI bus, etc.
>
> So you vote for adding this code to more than 80 4xx boards that all would use 
> the same code here? I don't like this. I would prefer one instance in the cpu 
> directory which could be overridden if needed by a board specific version.

Why not have both, a board and a CPU dependant init function like USB?

Best regards

Markus Klotzbuecher

--
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de