[U-Boot] [PATCH v2 3/3] x86: Add Intel Edison board files

[Felipe Balbi <felipe.balbi@linux.intel.com>]

Hi,

Andy Shevchenko <andriy.shevchenko@linux.intel.com> writes:
> On Thu, 2017-07-06 at 12:44 +0300, Andy Shevchenko wrote:
>> On Thu, 2017-07-06 at 12:07 +0800, Bin Meng wrote:
>> > Hi Andy,
>> > 
>> > On Thu, Jul 6, 2017 at 4:56 AM, Andy Shevchenko
>> > <andriy.shevchenko@linux.intel.com> wrote:
>> > > Add Intel Edison board which is using U-Boot.
>
>> > > +config SYS_USB_OTG_BASE
>> > > +       hex
>> > > +       default 0xf9100000
>> > 
>> > Can this otg controller be put into device tree, like other
>> > peripherals?
>> 
>> I will check the possibility.
>
> Is it show stopper? To keep things simpler it would be better to keep
> board initialization in place and move forward later.
>
> Felipe, what is your opinion on the topic?

IIRC, there are some folks working on moving DWC3 to DM. Frankly, I
would rather not wait for the conversion before merging Edison's
board-file. After the driver is switched to DM, adding another node on
DT isn't really a lot of work by any stretch of the imagination.

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170706/425a0ea8/attachment.sig>