From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vagrant Cascadian Date: Wed, 29 Apr 2015 13:02:48 -0700 Subject: [U-Boot] [PATCH 1/4] mx6cuboxi: Add HDMI output support In-Reply-To: <1430188244-28216-1-git-send-email-festevam@gmail.com> References: <1430188244-28216-1-git-send-email-festevam@gmail.com> Message-ID: <87egn2wvmf.fsf@aikidev.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 2015-04-27, Fabio Estevam wrote: > Add HDMI output using PLL5 as the source for the IPU DI clocks, > and accurate VESA timings. > > These settings are based on the patch from Soeren Moch > submitted for the tbs2910 mx6 based board. > > It allows the display to work properly at 1024x768 at 60. > > This should make the hdmi output signal compatible with most if not all > modern displays. I wasn't able to test this as the HDMI TV I'm using doesn't support this resolution (it is admittedly ~9 years old, the closest resolution it does support is 1280x720 at 60). How complicated would it be to support multiple resolutions? live well, vagrant -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 818 bytes Desc: not available URL: