From: Baruch Siach <baruch@tkos.co.il>
To: u-boot@lists.denx.de
Subject: [PATCH v2 0/5] mtd: pxa3xx_nand: add support for Armada 8k
Date: Tue, 20 Oct 2020 12:19:04 +0300 [thread overview]
Message-ID: <87lfg1tfuf.fsf@tarshish> (raw)
In-Reply-To: <056dc383-66e0-65b1-c20c-18f143bd120f@denx.de>
Hi Stefan,
On Tue, Oct 20 2020, Stefan Roese wrote:
> On 19.10.20 07:24, Baruch Siach wrote:
>> On Sun, Oct 18 2020, Chris Packham wrote:
>>> On Mon, Oct 19, 2020 at 1:59 AM Baruch Siach <baruch@tkos.co.il> wrote:
>>>>
>>>> This series adds NAND flash support to Aramda 8k systems. Patches make the
>>>> necessary changes to the pxa3xx_nand driver and DT files.
>>>>
>>>> v2:
>>>> Rebase on current master. Fixes conflict with commit 661c98121d4 ("mtd: nand:
>>>> pxa3xx: Fix not calling dev_xxx with a device")
>>>
>>> Is it worth looking at bringing in the newer marvell_nand driver from
>>> Linux? I suspect that it will be easier to keep in sync with changes
>>> for the Armada 8K. I have considered it in the past but it kind of
>>> fell off my radar.
>>
>> The kernel raw nand API has seen some significant changes recently. It
>> looks like the kernel marvell_nand driver relies on newer API. I'm not
>> sure how easy would be syncing the drivers to a degree that makes
>> porting of changes trivial. It would probably require many other changes
>> in generic U-Boot raw NAND code.
>
> I agree that without a re-sync with a more recent Linux MTD (NAND) core
> code, this task might prove complex and failure prone. And sync'ing the
> MTD core is also a pretty complex task which needs to be done very
> carefully, to not break any existing platforms. FWICT, nobody is working
> on it right now and we can't wait for this to happen and stall the
> development here. So from my point of view, I'm okay with updates to
> the current PXA NAND driver. Testing of these patches on other platforms
> would be very welcome though.
I should note that the same driver with these modifications was tested
successfully on Armada 385 systems with NAND flash and UBIFS.
Thanks,
baruch
>> Maybe Miquel can shed some light on that.
>>
>> Unfortunately, the U-Boot MAINTAINERS NAND FLASH entry is marked
>> "Orphaned (Since 2018-07)".
>
> Yes, this is unfortunate. Volunteers are always welcome. ;)
>
> Thanks,
> Stefan
>
>> baruch
>>
>>>> Baruch Siach (2):
>>>> arm: dts: armada-cp110-master: update nand-controller
>>>> mtd: pxa3xx_nand: remove dead code
>>>>
>>>> Shmuel Hazan (3):
>>>> arm: dts: armada-cp110-slave: add missing cps_nand
>>>> mtd: pxa3xx_nand: port to use driver model
>>>> mtd: nand: pxa3xx: enable NAND controller if the SoC needs it
>>>>
>>>> arch/arm/dts/armada-cp110-master.dtsi | 15 ++-
>>>> arch/arm/dts/armada-cp110-slave.dtsi | 16 +++
>>>> drivers/mtd/nand/raw/Kconfig | 2 +
>>>> drivers/mtd/nand/raw/pxa3xx_nand.c | 179 ++++++++++++++------------
>>>> 4 files changed, 124 insertions(+), 88 deletions(-)
--
~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -
next prev parent reply other threads:[~2020-10-20 9:19 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-18 12:56 [PATCH v2 0/5] mtd: pxa3xx_nand: add support for Armada 8k Baruch Siach
2020-10-18 12:56 ` [PATCH v2 1/5] arm: dts: armada-cp110-slave: add missing cps_nand Baruch Siach
2020-10-28 11:13 ` Stefan Roese
2020-10-18 12:56 ` [PATCH v2 2/5] arm: dts: armada-cp110-master: update nand-controller Baruch Siach
2020-10-28 11:13 ` Stefan Roese
2020-10-18 12:56 ` [PATCH v2 3/5] mtd: pxa3xx_nand: port to use driver model Baruch Siach
2020-10-28 11:16 ` Stefan Roese
2020-10-18 12:56 ` [PATCH v2 4/5] mtd: pxa3xx_nand: remove dead code Baruch Siach
2020-10-28 11:16 ` Stefan Roese
2020-10-18 12:56 ` [PATCH v2 5/5] mtd: nand: pxa3xx: enable NAND controller if the SoC needs it Baruch Siach
2020-10-28 11:17 ` Stefan Roese
2020-10-18 20:17 ` [PATCH v2 0/5] mtd: pxa3xx_nand: add support for Armada 8k Chris Packham
2020-10-19 5:24 ` Baruch Siach
2020-10-20 8:29 ` Stefan Roese
2020-10-20 9:19 ` Baruch Siach [this message]
2020-10-26 9:36 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87lfg1tfuf.fsf@tarshish \
--to=baruch@tkos.co.il \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox