public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Vagrant Cascadian <vagrant@debian.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 5/5] rockchip: rk3328: add rock64-rk3328_defconfig
Date: Mon, 13 May 2019 09:25:00 -0700	[thread overview]
Message-ID: <87lfzae2zn.fsf@yucca> (raw)
In-Reply-To: <20190508063435.3796-6-matwey.kornilov@gmail.com>

On 2019-05-08, Matwey V. Kornilov wrote:
> Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
> ---
>  configs/rock64-rk3328_defconfig | 91 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 91 insertions(+)
>  create mode 100644 configs/rock64-rk3328_defconfig

Thanks for submitting these patches upstream!

Unfortunately, I wasn't able to get this to boot off of microSD.

What process do you use to test this? Does it depend on patches not
present in 2019.07-rc1 or not yet merged?

The process I tried after building upstream arm-trusted-firmware 2.1:

 mkimage -T rksd -n rk3328 -d spl/u-boot-spl.bin u-boot-spl.rksd
    
 dd if=u-boot-spl.rksd of=/dev/sdb seek=64
 dd if=u-boot.itb of=/dev/sdb seek=16384

There was no output on the serial console, either at 1500000 or 115200.


live well,
  vagrant

> diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
> new file mode 100644
> index 0000000000..b278315035
> --- /dev/null
> +++ b/configs/rock64-rk3328_defconfig
> @@ -0,0 +1,91 @@
> +CONFIG_SMBIOS_MANUFACTURER="pine64"
> +CONFIG_SMBIOS_PRODUCT_NAME="rock64_rk3328"
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_ROCKCHIP_RK3328=y
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0
> +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
> +CONFIG_SPL_STACK_R_ADDR=0x600000
> +CONFIG_DEBUG_UART_BASE=0xFF130000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_DEBUG_UART=y
> +CONFIG_NR_DRAM_BANKS=1
> +# CONFIG_ANDROID_BOOT_IMAGE is not set
> +CONFIG_FIT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_LOAD_FIT=y
> +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock64.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_ATF=y
> +CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
> +CONFIG_FASTBOOT_BUF_ADDR=0x800800
> +CONFIG_FASTBOOT_FLASH=y
> +CONFIG_FASTBOOT_FLASH_MMC_DEV=1
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock64"
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_REGMAP=y
> +CONFIG_SPL_REGMAP=y
> +CONFIG_SYSCON=y
> +CONFIG_SPL_SYSCON=y
> +CONFIG_CLK=y
> +CONFIG_SPL_CLK=y
> +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SF_DEFAULT_SPEED=20000000
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PHY=y
> +CONFIG_PINCTRL=y
> +CONFIG_SPL_PINCTRL=y
> +CONFIG_PINCTRL_ROCKCHIP_RK3328=y
> +CONFIG_DM_PMIC=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_RAM=y
> +CONFIG_SPL_RAM=y
> +CONFIG_DM_RESET=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_OHCI_HCD=y
> +CONFIG_USB_OHCI_GENERIC=y
> +CONFIG_USB_DWC2=y
> +CONFIG_USB_DWC3=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
> +CONFIG_USB_GADGET_VENDOR_NUM=0x2207
> +CONFIG_USB_GADGET_PRODUCT_NUM=0x330a
> +CONFIG_USB_GADGET_DWC2_OTG=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_SPL_TINY_MEMSET=y
> +CONFIG_ERRNO_STR=y
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 227 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190513/41ddc8ef/attachment.sig>

  reply	other threads:[~2019-05-13 16:25 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-08  6:34 [U-Boot] [PATCH 0/5] Add initial support for Pine64 Rock64 board Matwey V. Kornilov
2019-05-08  6:34 ` [U-Boot] [PATCH 1/5] rockchip: rk3328: add spl board file support Matwey V. Kornilov
2019-05-18 16:08   ` Simon Glass
2019-05-08  6:34 ` [U-Boot] [PATCH 2/5] rockchip: rk3328: add config option for SPL Matwey V. Kornilov
2019-05-18 16:08   ` Simon Glass
2019-05-08  6:34 ` [U-Boot] [PATCH 3/5] rockchip: Kconfig: enable SPL support for rk3328 Matwey V. Kornilov
2019-05-18 16:08   ` Simon Glass
2019-05-08  6:34 ` [U-Boot] [PATCH 4/5] rockchip: dts: rk3328: add rk3328-rock64.dts Matwey V. Kornilov
2019-05-16  6:56   ` Kever Yang
2019-05-19 12:11     ` Matwey V. Kornilov
2019-05-08  6:34 ` [U-Boot] [PATCH 5/5] rockchip: rk3328: add rock64-rk3328_defconfig Matwey V. Kornilov
2019-05-13 16:25   ` Vagrant Cascadian [this message]
2019-05-13 22:59     ` Vagrant Cascadian
2019-05-13 23:13       ` Vagrant Cascadian
2019-05-14  9:41         ` Matwey V. Kornilov
2019-05-16  7:00   ` Kever Yang
2019-05-19 12:11     ` Matwey V. Kornilov
2019-05-19 12:10 ` [U-Boot] [PATCH v2 0/5] Add initial support for Pine64 Rock64 board Matwey V. Kornilov
2019-05-19 12:10   ` [U-Boot] [PATCH v2 1/5] rockchip: rk3328: add SPL board file support Matwey V. Kornilov
2019-05-30  1:13     ` Kever Yang
2019-05-19 12:10   ` [U-Boot] [PATCH v2 2/5] rockchip: rk3328: add SPL support Matwey V. Kornilov
2019-05-30  1:13     ` Kever Yang
2019-05-19 12:10   ` [U-Boot] [PATCH v2 3/5] rockchip: Kconfig: enable SPL support for rk3328 Matwey V. Kornilov
2019-05-30  1:24     ` Kever Yang
2019-05-19 12:10   ` [U-Boot] [PATCH v2 4/5] rockchip: dts: rk3328: add rk3328-rock64.dts Matwey V. Kornilov
2019-05-30  1:25     ` Kever Yang
2019-05-19 12:10   ` [U-Boot] [PATCH v2 5/5] rockchip: rk3328: add rock64-rk3328_defconfig Matwey V. Kornilov
2019-05-20 17:11     ` Vagrant Cascadian
2019-05-20 17:22       ` Matwey V. Kornilov
2019-05-20 18:15         ` Vagrant Cascadian
2019-05-22 16:59           ` Matwey V. Kornilov
2019-05-30  1:26     ` Kever Yang
2019-05-30  1:23   ` [U-Boot] [PATCH v2 0/5] Add initial support for Pine64 Rock64 board Kever Yang
2019-05-31  0:37   ` Kever Yang
2019-06-01 14:47   ` [U-Boot] [PATCH v3 0/6] " Matwey V. Kornilov
2019-06-01 14:47     ` [U-Boot] [PATCH v3 1/6] rockchip: rk3328: add SPL board file support Matwey V. Kornilov
2019-06-01 14:47     ` [U-Boot] [PATCH v3 2/6] rockchip: rk3328: add SPL support Matwey V. Kornilov
2019-06-01 14:47     ` [U-Boot] [PATCH v3 3/6] rockchip: Kconfig: enable SPL support for rk3328 Matwey V. Kornilov
2019-06-01 14:47     ` [U-Boot] [PATCH v3 4/6] rockchip: dts: rk3328: add rk3328-rock64.dts Matwey V. Kornilov
2019-06-01 14:47     ` [U-Boot] [PATCH v3 5/6] rockchip: rk3328: add rock64-rk3328_defconfig Matwey V. Kornilov
2019-06-04  7:42       ` Kever Yang
2019-06-04 11:48         ` Matwey V. Kornilov
2019-06-01 14:47     ` [U-Boot] [PATCH v3 6/6] doc: rockchip: Add note for Pine64 Rock64 board Matwey V. Kornilov
2019-06-04  2:48       ` Kever Yang
2019-06-08 21:27     ` [U-Boot] [PATCH v4 0/6] Add initial support " Matwey V. Kornilov
2019-06-08 21:27       ` [U-Boot] [PATCH v4 1/6] rockchip: rk3328: add SPL board file support Matwey V. Kornilov
2019-06-08 21:27       ` [U-Boot] [PATCH v4 2/6] rockchip: rk3328: add SPL support Matwey V. Kornilov
2019-06-08 21:27       ` [U-Boot] [PATCH v4 3/6] rockchip: Kconfig: enable SPL support for rk3328 Matwey V. Kornilov
2019-06-08 21:27       ` [U-Boot] [PATCH v4 4/6] rockchip: dts: rk3328: add rk3328-rock64.dts Matwey V. Kornilov
2019-06-08 21:27       ` [U-Boot] [PATCH v4 5/6] rockchip: rk3328: add rock64-rk3328_defconfig Matwey V. Kornilov
2019-06-18  7:47         ` Kever Yang
2019-06-08 21:27       ` [U-Boot] [PATCH v4 6/6] doc: rockchip: Add note for Pine64 Rock64 board Matwey V. Kornilov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87lfzae2zn.fsf@yucca \
    --to=vagrant@debian.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox