* [U-Boot-Users] Anonymous CVS
@ 2003-08-21 12:47 Timothy Meese
2003-08-22 2:52 ` Detlev Zundel
0 siblings, 1 reply; 2+ messages in thread
From: Timothy Meese @ 2003-08-21 12:47 UTC (permalink / raw)
To: u-boot
Hello,
I'm a relative newcomer to u-boot, but it's nice to see a multiplatform
boot firmware solution. I have a couple of questions to start with:
I've tried fetching the source from anonymous CVS on sf.net and I always
get to the point where it's fetching u-boot/tools/updater/utils.c, and
the checkout hangs. Has anyone else experienced this issue?
I'm interested in using u-boot for an Alchemy Au1100-based board. As I
understand it, the Au1100 is based on an enhanced MIPS 3k core. Aside
from toolchain issues, has anyone ported u-boot to a 3k core? I
understand the major difference between the 4k and 3k is the pipeline
depth, which would seem to be a tools issue.
Thanks,
Tim
--
Tim Meese // Software Engineer // MBARI
// mailto:timm at mbari.org // 7700 Sandholdt Road
// (831) 775-2039 // Moss Landing, CA 95039 USA
// (831) 775-1646 fax // http://www.mbari.org
^ permalink raw reply [flat|nested] 2+ messages in thread* [U-Boot-Users] Anonymous CVS
2003-08-21 12:47 [U-Boot-Users] Anonymous CVS Timothy Meese
@ 2003-08-22 2:52 ` Detlev Zundel
0 siblings, 0 replies; 2+ messages in thread
From: Detlev Zundel @ 2003-08-22 2:52 UTC (permalink / raw)
To: u-boot
Hi Timothy,
> I've tried fetching the source from anonymous CVS on sf.net and I always
> get to the point where it's fetching u-boot/tools/updater/utils.c, and
> the checkout hangs. Has anyone else experienced this issue?
The CVS service at SF hash serious problems for quite some time now.
I haven't seen a hang at that stage, but that really says nothing at
all. You can grab a recent version (17 Aug) from our ftp server
though.
> I'm interested in using u-boot for an Alchemy Au1100-based board. As I
> understand it, the Au1100 is based on an enhanced MIPS 3k core. Aside
> from toolchain issues, has anyone ported u-boot to a 3k core? I
> understand the major difference between the 4k and 3k is the pipeline
> depth, which would seem to be a tools issue.
I am not too familiar with the MIPS family but in the sources there is
support for one MIPS 4k based board and for one MIPS 5k board, so you
can probably claim new ground here...
Cheers
Detlev
[1] ftp://ftp.denx.de/pub/u-boot/u-boot-0.4.6.tar.bz2
--
Peace of mind isn't at all superficial to technical work. It's the
whole thing. That which produces it is good work and that which
destroys it is bad work.
-- Robert M. Pirsig
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-08-22 2:52 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-08-21 12:47 [U-Boot-Users] Anonymous CVS Timothy Meese
2003-08-22 2:52 ` Detlev Zundel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox