[GIT PULL] Please pull u-boot-dfu-20260211 into master

Mattijs Korpershoek
2026-02-11T14:13:12Z

Hi Tom,

Here is a PR for master

USB Gadget:
* dwc3: Support ip and version type
* dwc3: Increase controller halt timeout
* dwc3: Don't send unintended link state change
* dwc3: Improve reset sequence
* dwc2: Move dr_mode check to bind to support RK3288/RK3506 with
2 DWC2 controllers

CI:
* https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/29259

Regards,
Mattijs

The following changes since commit eed514b11d04a2f8a949521ad3bffba3ec98bd2f:

video: correct label for cyclic video_idle (2026-01-29 10:00:59 -0600)

are available in the Git repository at:

https://source.denx.de/u-boot/custodians/u-boot-dfu.git tags/u-boot-dfu-20260211

for you to fetch changes up to e69841fa71d67c560d767b786f956bb6f2873130:

usb: gadget: dwc2: Move dr_mode check from of_to_plat() to bind() (2026-01-30 09:01:42 +0100)

----------------------------------------------------------------
u-boot-dfu-20260211

USB Gadget:
* dwc3: Support ip and version type
* dwc3: Increase controller halt timeout
* dwc3: Don't send unintended link state change
* dwc3: Improve reset sequence
* dwc2: Move dr_mode check to bind to support RK3288/RK3506 with
2 DWC2 controllers

----------------------------------------------------------------
Chris Morgan (4):
usb: dwc3: core: Add ip and version_type support from Linux
usb: dwc3: Increase DWC3 controller halt timeout
usb: dwc3: gadget: Don't send unintended link state change
usb: dwc3: core: improve reset sequence

Jonas Karlman (1):
usb: gadget: dwc2: Move dr_mode check from of_to_plat() to bind()

drivers/usb/dwc3/core.c | 92 +++++++++++++++++++++++++--------------
drivers/usb/dwc3/core.h | 60 +++++++++++++++++++++++++
drivers/usb/dwc3/gadget.c | 20 ++++-----
drivers/usb/dwc3/gadget.h | 14 ++++++
drivers/usb/gadget/dwc2_udc_otg.c | 19 +++++---
5 files changed, 156 insertions(+), 49 deletions(-)