From mboxrd@z Thu Jan 1 00:00:00 1970 From: Markus =?utf-8?Q?Klotzb=C3=BCcher?= Date: Mon, 21 Apr 2008 17:04:15 +0200 Subject: [U-Boot-Users] USB SUPPORT In-Reply-To: <1208752189.2935.10.camel@Aneesh> (Aneesh's message of "Mon\, 21 Apr 2008 09\:59\:49 +0530") References: <1208752189.2935.10.camel@Aneesh> Message-ID: <87prsjdzbk.fsf@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Aneesh, Aneesh writes: > I am using an at91rm9200dk custom board.I want to boot kernel and > ram disk from the usb stick.for that i tried to enable the usb support > in the uboot.but now i am getting a message like no storage devices > found . > i gave the configurations in include/configs/at91rm9200dk.h > like follows > #define CONFIG_DOS_PARTITION 1 > #define CONFIG_USB_OHCI 1 You should use the new ohci driver and define CONFIG_USB_OHCI_NEW. But that alone is not enough, please checkout doc/README.generic_usb_ohci. > #define CONFIG_USB_STORAGE 1 > #define CONFIG_COMMANDS \ > ((CONFIG_CMD_DFL | CFG_CMD_MII | CFG_CMD_NET | CFG_CMD_USB | \ > CFG_CMD_DHCP ) & \ > ~(CFG_CMD_BDI | \ > CFG_CMD_IMI | \ > CFG_CMD_AUTOSCRIPT | \ > CFG_CMD_FPGA | \ > CFG_CMD_MISC | \ > CFG_CMD_LOADS)) > Is this configuration is right? > i am not able to acess the USB stick using Storage USB Commands. My > U-boot version is 1.1.5. Oh, and please update your U-Boot version to top of git before anything else. Best regards Markus Klotzbuecher -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de