* [PATCH 0/2] arm: dts: k3-am625: Sync with kernel v6.6-rc1
@ 2023-09-11 14:02 Nishanth Menon
2023-09-11 14:02 ` [PATCH 1/2] arm: dts: k3-pinctrl: " Nishanth Menon
2023-09-11 14:02 ` [PATCH 2/2] arm: dts: k3-am625: " Nishanth Menon
0 siblings, 2 replies; 9+ messages in thread
From: Nishanth Menon @ 2023-09-11 14:02 UTC (permalink / raw)
To: Neha Francis, Tom Rini
Cc: Bryan, Praneeth, Andrew, Robert Nelson, Vignesh, u-boot,
Mattijs Korpershoek, Jan Kiszka, Marcel Ziswiler,
Francesco Dolcini, Emanuele Ghidoli, Nishanth Menon
Sync device tree with v6.6-rc1
Bootlog: beagleplay: https://gist.github.com/nmenon/b46863248e8cf0cdaaeca0d55c966af4
Nishanth Menon (2):
arm: dts: k3-pinctrl: Sync with kernel v6.6-rc1
arm: dts: k3-am625: Sync with kernel v6.6-rc1
arch/arm/dts/k3-am62-main.dtsi | 52 ++++++++-
arch/arm/dts/k3-am62-mcu.dtsi | 24 +++++
arch/arm/dts/k3-am62-verdin-dev.dtsi | 50 +++++++++
arch/arm/dts/k3-am62-verdin.dtsi | 45 +++++++-
arch/arm/dts/k3-am62.dtsi | 8 ++
arch/arm/dts/k3-am625-beagleplay.dts | 154 ++++++++++++++++++++++++++-
arch/arm/dts/k3-am625-sk.dts | 2 +-
arch/arm/dts/k3-pinctrl.h | 12 +++
8 files changed, 337 insertions(+), 10 deletions(-)
--
2.40.0
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 1/2] arm: dts: k3-pinctrl: Sync with kernel v6.6-rc1
2023-09-11 14:02 [PATCH 0/2] arm: dts: k3-am625: Sync with kernel v6.6-rc1 Nishanth Menon
@ 2023-09-11 14:02 ` Nishanth Menon
2023-09-12 7:04 ` Dhruva Gole
` (2 more replies)
2023-09-11 14:02 ` [PATCH 2/2] arm: dts: k3-am625: " Nishanth Menon
1 sibling, 3 replies; 9+ messages in thread
From: Nishanth Menon @ 2023-09-11 14:02 UTC (permalink / raw)
To: Neha Francis, Tom Rini
Cc: Bryan, Praneeth, Andrew, Robert Nelson, Vignesh, u-boot,
Mattijs Korpershoek, Jan Kiszka, Marcel Ziswiler,
Francesco Dolcini, Emanuele Ghidoli, Nishanth Menon
Sync pinctrl header with v6.6-rc1
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm/dts/k3-pinctrl.h | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/dts/k3-pinctrl.h b/arch/arm/dts/k3-pinctrl.h
index c97548a3f42d..2a4e0e084d69 100644
--- a/arch/arm/dts/k3-pinctrl.h
+++ b/arch/arm/dts/k3-pinctrl.h
@@ -11,6 +11,7 @@
#define PULLUDEN_SHIFT (16)
#define PULLTYPESEL_SHIFT (17)
#define RXACTIVE_SHIFT (18)
+#define DEBOUNCE_SHIFT (11)
#define PULL_DISABLE (1 << PULLUDEN_SHIFT)
#define PULL_ENABLE (0 << PULLUDEN_SHIFT)
@@ -29,9 +30,20 @@
#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP)
#define PIN_INPUT_PULLDOWN (INPUT_EN | PULL_DOWN)
+#define PIN_DEBOUNCE_DISABLE (0 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF1 (1 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF2 (2 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF3 (3 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF4 (4 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF5 (5 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF6 (6 << DEBOUNCE_SHIFT)
+
#define AM62AX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#define AM62AX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM62PX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM62PX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
+
#define AM62X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#define AM62X_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
--
2.40.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 2/2] arm: dts: k3-am625: Sync with kernel v6.6-rc1
2023-09-11 14:02 [PATCH 0/2] arm: dts: k3-am625: Sync with kernel v6.6-rc1 Nishanth Menon
2023-09-11 14:02 ` [PATCH 1/2] arm: dts: k3-pinctrl: " Nishanth Menon
@ 2023-09-11 14:02 ` Nishanth Menon
2023-09-12 6:47 ` Dhruva Gole
` (2 more replies)
1 sibling, 3 replies; 9+ messages in thread
From: Nishanth Menon @ 2023-09-11 14:02 UTC (permalink / raw)
To: Neha Francis, Tom Rini
Cc: Bryan, Praneeth, Andrew, Robert Nelson, Vignesh, u-boot,
Mattijs Korpershoek, Jan Kiszka, Marcel Ziswiler,
Francesco Dolcini, Emanuele Ghidoli, Nishanth Menon
Sync device tree with v6.6-rc1
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm/dts/k3-am62-main.dtsi | 52 ++++++++-
arch/arm/dts/k3-am62-mcu.dtsi | 24 +++++
arch/arm/dts/k3-am62-verdin-dev.dtsi | 50 +++++++++
arch/arm/dts/k3-am62-verdin.dtsi | 45 +++++++-
arch/arm/dts/k3-am62.dtsi | 8 ++
arch/arm/dts/k3-am625-beagleplay.dts | 154 ++++++++++++++++++++++++++-
arch/arm/dts/k3-am625-sk.dts | 2 +-
7 files changed, 325 insertions(+), 10 deletions(-)
diff --git a/arch/arm/dts/k3-am62-main.dtsi b/arch/arm/dts/k3-am62-main.dtsi
index 2488e3a537fe..284b90c94da8 100644
--- a/arch/arm/dts/k3-am62-main.dtsi
+++ b/arch/arm/dts/k3-am62-main.dtsi
@@ -55,11 +55,29 @@
#phy-cells = <1>;
};
- epwm_tbclk: clock@4130 {
- compatible = "ti,am62-epwm-tbclk", "syscon";
+ epwm_tbclk: clock-controller@4130 {
+ compatible = "ti,am62-epwm-tbclk";
reg = <0x4130 0x4>;
#clock-cells = <1>;
};
+
+ audio_refclk0: clock-controller@82e0 {
+ compatible = "ti,am62-audio-refclk";
+ reg = <0x82e0 0x4>;
+ clocks = <&k3_clks 157 0>;
+ assigned-clocks = <&k3_clks 157 0>;
+ assigned-clock-parents = <&k3_clks 157 8>;
+ #clock-cells = <0>;
+ };
+
+ audio_refclk1: clock-controller@82e4 {
+ compatible = "ti,am62-audio-refclk";
+ reg = <0x82e4 0x4>;
+ clocks = <&k3_clks 157 10>;
+ assigned-clocks = <&k3_clks 157 10>;
+ assigned-clock-parents = <&k3_clks 157 18>;
+ #clock-cells = <0>;
+ };
};
dmss: bus@48000000 {
@@ -174,7 +192,6 @@
crypto: crypto@40900000 {
compatible = "ti,am62-sa3ul";
reg = <0x00 0x40900000 0x00 0x1200>;
- power-domains = <&k3_pds 70 TI_SCI_PD_SHARED>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
@@ -590,7 +607,7 @@
usb0: usb@31000000 {
compatible = "snps,dwc3";
- reg =<0x00 0x31000000 0x00 0x50000>;
+ reg = <0x00 0x31000000 0x00 0x50000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
interrupt-names = "host", "peripheral";
@@ -613,7 +630,7 @@
usb1: usb@31100000 {
compatible = "snps,dwc3";
- reg =<0x00 0x31100000 0x00 0x50000>;
+ reg = <0x00 0x31100000 0x00 0x50000>;
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
<GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
interrupt-names = "host", "peripheral";
@@ -718,6 +735,31 @@
};
};
+ dss: dss@30200000 {
+ compatible = "ti,am625-dss";
+ reg = <0x00 0x30200000 0x00 0x1000>, /* common */
+ <0x00 0x30202000 0x00 0x1000>, /* vidl1 */
+ <0x00 0x30206000 0x00 0x1000>, /* vid */
+ <0x00 0x30207000 0x00 0x1000>, /* ovr1 */
+ <0x00 0x30208000 0x00 0x1000>, /* ovr2 */
+ <0x00 0x3020a000 0x00 0x1000>, /* vp1: Used for OLDI */
+ <0x00 0x3020b000 0x00 0x1000>; /* vp2: Used as DPI Out */
+ reg-names = "common", "vidl1", "vid",
+ "ovr1", "ovr2", "vp1", "vp2";
+ power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 186 6>,
+ <&dss_vp1_clk>,
+ <&k3_clks 186 2>;
+ clock-names = "fck", "vp1", "vp2";
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ dss_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
hwspinlock: spinlock@2a000000 {
compatible = "ti,am64-hwspinlock";
reg = <0x00 0x2a000000 0x00 0x1000>;
diff --git a/arch/arm/dts/k3-am62-mcu.dtsi b/arch/arm/dts/k3-am62-mcu.dtsi
index 19fc38157d94..80a3e1db26a9 100644
--- a/arch/arm/dts/k3-am62-mcu.dtsi
+++ b/arch/arm/dts/k3-am62-mcu.dtsi
@@ -147,4 +147,28 @@
/* Tightly coupled to M4F */
status = "reserved";
};
+
+ mcu_mcan0: can@4e08000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x4e08000 0x00 0x200>,
+ <0x00 0x4e00000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 188 6>, <&k3_clks 188 1>;
+ clock-names = "hclk", "cclk";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ mcu_mcan1: can@4e18000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x4e18000 0x00 0x200>,
+ <0x00 0x4e10000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 189 6>, <&k3_clks 189 1>;
+ clock-names = "hclk", "cclk";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
};
diff --git a/arch/arm/dts/k3-am62-verdin-dev.dtsi b/arch/arm/dts/k3-am62-verdin-dev.dtsi
index 846caee7dfa4..6701cb8974bb 100644
--- a/arch/arm/dts/k3-am62-verdin-dev.dtsi
+++ b/arch/arm/dts/k3-am62-verdin-dev.dtsi
@@ -8,6 +8,42 @@
* https://www.toradex.com/products/carrier-board/verdin-development-board-kit
*/
+/ {
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,bitclock-master = <&codec_dai>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&codec_dai>;
+ simple-audio-card,name = "verdin-nau8822";
+ simple-audio-card,routing =
+ "Headphones", "LHP",
+ "Headphones", "RHP",
+ "Speaker", "LSPK",
+ "Speaker", "RSPK",
+ "Line Out", "AUXOUT1",
+ "Line Out", "AUXOUT2",
+ "LAUX", "Line In",
+ "RAUX", "Line In",
+ "LMICP", "Mic In",
+ "RMICP", "Mic In";
+ simple-audio-card,widgets =
+ "Headphones", "Headphones",
+ "Line Out", "Line Out",
+ "Speaker", "Speaker",
+ "Microphone", "Mic In",
+ "Line", "Line In";
+
+ codec_dai: simple-audio-card,codec {
+ clocks = <&audio_refclk1>;
+ sound-dai = <&nau8822_1a>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp0>;
+ };
+ };
+};
+
/* Verdin ETHs */
&cpsw3g {
pinctrl-names = "default";
@@ -65,6 +101,15 @@
&main_i2c1 {
status = "okay";
+ /* Audio Codec */
+ nau8822_1a: audio-codec@1a {
+ compatible = "nuvoton,nau8822";
+ reg = <0x1a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s1_mclk>;
+ #sound-dai-cells = <0>;
+ };
+
/* IO Expander */
gpio_expander_21: gpio@21 {
compatible = "nxp,pcal6416";
@@ -144,6 +189,11 @@
status = "okay";
};
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+ status = "okay";
+};
+
/* Verdin UART_4 */
&mcu_uart0 {
status = "okay";
diff --git a/arch/arm/dts/k3-am62-verdin.dtsi b/arch/arm/dts/k3-am62-verdin.dtsi
index 57dd061911ab..40992e7e4c30 100644
--- a/arch/arm/dts/k3-am62-verdin.dtsi
+++ b/arch/arm/dts/k3-am62-verdin.dtsi
@@ -19,6 +19,8 @@
};
aliases {
+ can0 = &main_mcan0;
+ can1 = &mcu_mcan0;
ethernet0 = &cpsw_port1;
ethernet1 = &cpsw_port2;
i2c0 = &main_i2c0;
@@ -732,6 +734,14 @@
>;
};
+ /* Verdin CAN_2 */
+ pinctrl_mcu_mcan0: mcu-mcan0-default-pins {
+ pinctrl-single,pins = <
+ AM62X_MCU_IOPAD(0x0038, PIN_INPUT, 0) /* (B3) MCU_MCAN0_RX */ /* SODIMM 26 */
+ AM62X_MCU_IOPAD(0x0034, PIN_OUTPUT, 0) /* (D6) MCU_MCAN0_TX */ /* SODIMM 24 */
+ >;
+ };
+
/* Verdin UART_4 - Reserved to Cortex-M4 */
pinctrl_mcu_uart0: mcu-uart0-default-pins {
pinctrl-single,pins = <
@@ -758,6 +768,11 @@
};
};
+/* VERDIN I2S_1_MCLK */
+&audio_refclk1 {
+ assigned-clock-rates = <25000000>;
+};
+
&cpsw3g {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii1>;
@@ -800,6 +815,26 @@
};
};
+&dss {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_parallel_rgb>;
+ status = "disabled";
+};
+
+&dss_ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* VP2: DPI Output */
+ port@1 {
+ reg = <1>;
+
+ dpi_out: endpoint {
+ remote-endpoint = <&rgb_in>;
+ };
+ };
+};
+
/* Verdin PWM_1, PWM_2 */
&epwm0 {
pinctrl-names = "default";
@@ -1036,6 +1071,7 @@
rgb_in: endpoint {
data-lines = <18>;
+ remote-endpoint = <&dpi_out>;
};
};
@@ -1238,8 +1274,6 @@
status = "disabled";
};
-/* Verdin CAN_2 - Reserved to Cortex-M4 */
-
/* Verdin SPI_1 */
&main_spi1 {
pinctrl-names = "default";
@@ -1333,6 +1367,13 @@
"";
};
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mcu_mcan0>;
+ status = "disabled";
+};
+
/* Verdin UART_4 - Cortex-M4 UART */
&mcu_uart0 {
pinctrl-names = "default";
diff --git a/arch/arm/dts/k3-am62.dtsi b/arch/arm/dts/k3-am62.dtsi
index 5e72c445f37a..11f14eef2d44 100644
--- a/arch/arm/dts/k3-am62.dtsi
+++ b/arch/arm/dts/k3-am62.dtsi
@@ -102,6 +102,14 @@
};
};
+ dss_vp1_clk: clock-divider-oldi {
+ compatible = "fixed-factor-clock";
+ clocks = <&k3_clks 186 0>;
+ #clock-cells = <0>;
+ clock-div = <7>;
+ clock-mult = <1>;
+ };
+
#include "k3-am62-thermal.dtsi"
};
diff --git a/arch/arm/dts/k3-am625-beagleplay.dts b/arch/arm/dts/k3-am625-beagleplay.dts
index 589bf998bc52..7cfdf562b53b 100644
--- a/arch/arm/dts/k3-am625-beagleplay.dts
+++ b/arch/arm/dts/k3-am625-beagleplay.dts
@@ -14,7 +14,7 @@
#include "k3-am625.dtsi"
/ {
- compatible = "beagle,am625-beagleplay", "ti,am625";
+ compatible = "beagle,am625-beagleplay", "ti,am625";
model = "BeagleBoard.org BeaglePlay";
aliases {
@@ -192,6 +192,34 @@
};
+ hdmi0: connector-hdmi {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+ type = "a";
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&it66121_out>;
+ };
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "it66121 HDMI";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&hdmi_dailink_master>;
+ simple-audio-card,frame-master = <&hdmi_dailink_master>;
+
+ hdmi_dailink_master: simple-audio-card,cpu {
+ sound-dai = <&mcasp1>;
+ system-clock-direction-out;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&it66121>;
+ };
+ };
+
/* Workaround for errata i2329 - just use mdio bitbang */
mdio0: mdio {
compatible = "virtual,mdio-gpio";
@@ -422,6 +450,57 @@
AM62X_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (D16) EXTINTn */
>;
};
+
+ hdmi_gpio_pins_default: hdmi-gpio-default-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0094, PIN_INPUT_PULLUP | PIN_DEBOUNCE_CONF6, 7) /* (N20) GPMC0_BE1n.GPIO0_36 */
+ AM62X_IOPAD(0x0054, PIN_OUTPUT_PULLUP, 7) /* (P21) GPMC0_AD6.GPIO0_21 */
+ >;
+ };
+
+ mcasp_hdmi_pins_default: mcasp-hdmi-default-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0090, PIN_INPUT, 2) /* (M24) GPMC0_BE0n_CLE.MCASP1_ACLKX */
+ AM62X_IOPAD(0x0098, PIN_INPUT, 2) /* (U23) GPMC0_WAIT0.MCASP1_AFSX */
+ AM62X_IOPAD(0x008c, PIN_OUTPUT, 2) /* (L25) GPMC0_WEn.MCASP1_AXR0 */
+ AM62X_IOPAD(0x0088, PIN_INPUT, 2) /* (L24) GPMC0_OEn_REn.MCASP1_AXR1 */
+ AM62X_IOPAD(0x0084, PIN_INPUT, 2) /* (L23) GPMC0_ADVn_ALE.MCASP1_AXR2 */
+ AM62X_IOPAD(0x007c, PIN_INPUT, 2) /* (P25) GPMC0_CLK.MCASP1_AXR3 */
+ >;
+ };
+
+ dss0_pins_default: dss0-default-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
+ AM62X_IOPAD(0x00f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
+ AM62X_IOPAD(0x0104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
+ AM62X_IOPAD(0x00fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
+ AM62X_IOPAD(0x00b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
+ AM62X_IOPAD(0x00bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
+ AM62X_IOPAD(0x00c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
+ AM62X_IOPAD(0x00c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
+ AM62X_IOPAD(0x00c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
+ AM62X_IOPAD(0x00cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
+ AM62X_IOPAD(0x00d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
+ AM62X_IOPAD(0x00d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
+ AM62X_IOPAD(0x00d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
+ AM62X_IOPAD(0x00dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
+ AM62X_IOPAD(0x00e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
+ AM62X_IOPAD(0x00e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
+ AM62X_IOPAD(0x00e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
+ AM62X_IOPAD(0x00ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
+ AM62X_IOPAD(0x00f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
+ AM62X_IOPAD(0x00f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
+ AM62X_IOPAD(0x005c, PIN_OUTPUT, 1) /* (R24) GPMC0_AD8.VOUT0_DATA16 */
+ AM62X_IOPAD(0x0060, PIN_OUTPUT, 1) /* (R25) GPMC0_AD9.VOUT0_DATA17 */
+ AM62X_IOPAD(0x0064, PIN_OUTPUT, 1) /* (T25) GPMC0_AD10.VOUT0_DATA18 */
+ AM62X_IOPAD(0x0068, PIN_OUTPUT, 1) /* (R21) GPMC0_AD11.VOUT0_DATA19 */
+ AM62X_IOPAD(0x006c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */
+ AM62X_IOPAD(0x0070, PIN_OUTPUT, 1) /* (T24) GPMC0_AD13.VOUT0_DATA21 */
+ AM62X_IOPAD(0x0074, PIN_OUTPUT, 1) /* (U25) GPMC0_AD14.VOUT0_DATA22 */
+ AM62X_IOPAD(0x0078, PIN_OUTPUT, 1) /* (U24) GPMC0_AD15.VOUT0_DATA23 */
+ >;
+ };
};
&mcu_pmx0 {
@@ -432,7 +511,7 @@
>;
};
- gbe_pmx_obsclk: gbe-pmx-clk-default {
+ gbe_pmx_obsclk: gbe-pmx-obsclk-default-pins {
pinctrl-single,pins = <
AM62X_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (B8) MCU_SPI0_CS1.MCU_OBSCLK0 */
>;
@@ -670,6 +749,42 @@
pinctrl-0 = <&i2c2_1v8_pins_default>;
clock-frequency = <100000>;
status = "okay";
+
+ it66121: bridge-hdmi@4c {
+ compatible = "ite,it66121";
+ reg = <0x4c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_gpio_pins_default>;
+ vcn33-supply = <&vdd_3v3>;
+ vcn18-supply = <&buck2_reg>;
+ vrf12-supply = <&buck3_reg>;
+ reset-gpios = <&main_gpio0 21 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&main_gpio0>;
+ interrupts = <36 IRQ_TYPE_EDGE_FALLING>;
+ #sound-dai-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ it66121_in: endpoint {
+ bus-width = <24>;
+ remote-endpoint = <&dpi1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ it66121_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
};
&main_i2c3 {
@@ -756,3 +871,38 @@
pinctrl-0 = <&wifi_debug_uart_pins_default>;
status = "okay";
};
+
+&dss {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss0_pins_default>;
+};
+
+&dss_ports {
+ /* VP2: DPI Output */
+ port@1 {
+ reg = <1>;
+
+ dpi1_out: endpoint {
+ remote-endpoint = <&it66121_in>;
+ };
+ };
+};
+
+&mcasp1 {
+ status = "okay";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcasp_hdmi_pins_default>;
+ auxclk-fs-ratio = <2177>;
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 1 0 0 0
+ 0 0 0 0
+ 0 0 0 0
+ 0 0 0 0
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
diff --git a/arch/arm/dts/k3-am625-sk.dts b/arch/arm/dts/k3-am625-sk.dts
index 3f9ef4053aa6..7c98c1b855d1 100644
--- a/arch/arm/dts/k3-am625-sk.dts
+++ b/arch/arm/dts/k3-am625-sk.dts
@@ -212,7 +212,7 @@
pinctrl-names = "default";
pinctrl-0 = <&ospi0_pins_default>;
- flash@0{
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <8>;
--
2.40.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] arm: dts: k3-am625: Sync with kernel v6.6-rc1
2023-09-11 14:02 ` [PATCH 2/2] arm: dts: k3-am625: " Nishanth Menon
@ 2023-09-12 6:47 ` Dhruva Gole
2023-09-12 12:11 ` Mattijs Korpershoek
2023-09-19 15:14 ` Tom Rini
2 siblings, 0 replies; 9+ messages in thread
From: Dhruva Gole @ 2023-09-12 6:47 UTC (permalink / raw)
To: Nishanth Menon
Cc: Neha Francis, Tom Rini, Bryan, Praneeth, Andrew, Robert Nelson,
Vignesh, u-boot, Mattijs Korpershoek, Jan Kiszka, Marcel Ziswiler,
Francesco Dolcini, Emanuele Ghidoli
On Sep 11, 2023 at 09:02:56 -0500, Nishanth Menon wrote:
> Sync device tree with v6.6-rc1
>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> ---
> arch/arm/dts/k3-am62-main.dtsi | 52 ++++++++-
> arch/arm/dts/k3-am62-mcu.dtsi | 24 +++++
> arch/arm/dts/k3-am62-verdin-dev.dtsi | 50 +++++++++
> arch/arm/dts/k3-am62-verdin.dtsi | 45 +++++++-
> arch/arm/dts/k3-am62.dtsi | 8 ++
> arch/arm/dts/k3-am625-beagleplay.dts | 154 ++++++++++++++++++++++++++-
> arch/arm/dts/k3-am625-sk.dts | 2 +-
> 7 files changed, 325 insertions(+), 10 deletions(-)
>
LGTM! Thanks for the sync up.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
>
--
Best regards,
Dhruva Gole <d-gole@ti.com>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] arm: dts: k3-pinctrl: Sync with kernel v6.6-rc1
2023-09-11 14:02 ` [PATCH 1/2] arm: dts: k3-pinctrl: " Nishanth Menon
@ 2023-09-12 7:04 ` Dhruva Gole
2023-09-12 12:08 ` Mattijs Korpershoek
2023-09-19 15:14 ` Tom Rini
2 siblings, 0 replies; 9+ messages in thread
From: Dhruva Gole @ 2023-09-12 7:04 UTC (permalink / raw)
To: Nishanth Menon
Cc: Neha Francis, Tom Rini, Bryan, Praneeth, Andrew, Robert Nelson,
Vignesh, u-boot, Mattijs Korpershoek, Jan Kiszka, Marcel Ziswiler,
Francesco Dolcini, Emanuele Ghidoli
On Sep 11, 2023 at 09:02:55 -0500, Nishanth Menon wrote:
> Sync pinctrl header with v6.6-rc1
>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> ---
> arch/arm/dts/k3-pinctrl.h | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/dts/k3-pinctrl.h b/arch/arm/dts/k3-pinctrl.h
> index c97548a3f42d..2a4e0e084d69 100644
> --- a/arch/arm/dts/k3-pinctrl.h
> +++ b/arch/arm/dts/k3-pinctrl.h
> @@ -11,6 +11,7 @@
> #define PULLUDEN_SHIFT (16)
> #define PULLTYPESEL_SHIFT (17)
> #define RXACTIVE_SHIFT (18)
> +#define DEBOUNCE_SHIFT (11)
>
> #define PULL_DISABLE (1 << PULLUDEN_SHIFT)
> #define PULL_ENABLE (0 << PULLUDEN_SHIFT)
> @@ -29,9 +30,20 @@
> #define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP)
> #define PIN_INPUT_PULLDOWN (INPUT_EN | PULL_DOWN)
>
> +#define PIN_DEBOUNCE_DISABLE (0 << DEBOUNCE_SHIFT)
> +#define PIN_DEBOUNCE_CONF1 (1 << DEBOUNCE_SHIFT)
> +#define PIN_DEBOUNCE_CONF2 (2 << DEBOUNCE_SHIFT)
> +#define PIN_DEBOUNCE_CONF3 (3 << DEBOUNCE_SHIFT)
> +#define PIN_DEBOUNCE_CONF4 (4 << DEBOUNCE_SHIFT)
> +#define PIN_DEBOUNCE_CONF5 (5 << DEBOUNCE_SHIFT)
> +#define PIN_DEBOUNCE_CONF6 (6 << DEBOUNCE_SHIFT)
> +
> #define AM62AX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
> #define AM62AX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
>
> +#define AM62PX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
> +#define AM62PX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
> +
> #define AM62X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
> #define AM62X_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
--
Best regards,
Dhruva Gole <d-gole@ti.com>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] arm: dts: k3-pinctrl: Sync with kernel v6.6-rc1
2023-09-11 14:02 ` [PATCH 1/2] arm: dts: k3-pinctrl: " Nishanth Menon
2023-09-12 7:04 ` Dhruva Gole
@ 2023-09-12 12:08 ` Mattijs Korpershoek
2023-09-19 15:14 ` Tom Rini
2 siblings, 0 replies; 9+ messages in thread
From: Mattijs Korpershoek @ 2023-09-12 12:08 UTC (permalink / raw)
To: Nishanth Menon, Neha Francis, Tom Rini
Cc: Bryan, Praneeth, Andrew, Robert Nelson, Vignesh, u-boot,
Jan Kiszka, Marcel Ziswiler, Francesco Dolcini, Emanuele Ghidoli,
Nishanth Menon
On lun., sept. 11, 2023 at 09:02, Nishanth Menon <nm@ti.com> wrote:
> Sync pinctrl header with v6.6-rc1
>
> Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
> ---
> arch/arm/dts/k3-pinctrl.h | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/dts/k3-pinctrl.h b/arch/arm/dts/k3-pinctrl.h
> index c97548a3f42d..2a4e0e084d69 100644
> --- a/arch/arm/dts/k3-pinctrl.h
> +++ b/arch/arm/dts/k3-pinctrl.h
> @@ -11,6 +11,7 @@
> #define PULLUDEN_SHIFT (16)
> #define PULLTYPESEL_SHIFT (17)
> #define RXACTIVE_SHIFT (18)
> +#define DEBOUNCE_SHIFT (11)
>
> #define PULL_DISABLE (1 << PULLUDEN_SHIFT)
> #define PULL_ENABLE (0 << PULLUDEN_SHIFT)
> @@ -29,9 +30,20 @@
> #define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP)
> #define PIN_INPUT_PULLDOWN (INPUT_EN | PULL_DOWN)
>
> +#define PIN_DEBOUNCE_DISABLE (0 << DEBOUNCE_SHIFT)
> +#define PIN_DEBOUNCE_CONF1 (1 << DEBOUNCE_SHIFT)
> +#define PIN_DEBOUNCE_CONF2 (2 << DEBOUNCE_SHIFT)
> +#define PIN_DEBOUNCE_CONF3 (3 << DEBOUNCE_SHIFT)
> +#define PIN_DEBOUNCE_CONF4 (4 << DEBOUNCE_SHIFT)
> +#define PIN_DEBOUNCE_CONF5 (5 << DEBOUNCE_SHIFT)
> +#define PIN_DEBOUNCE_CONF6 (6 << DEBOUNCE_SHIFT)
> +
> #define AM62AX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
> #define AM62AX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
>
> +#define AM62PX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
> +#define AM62PX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
> +
> #define AM62X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
> #define AM62X_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
>
> --
> 2.40.0
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] arm: dts: k3-am625: Sync with kernel v6.6-rc1
2023-09-11 14:02 ` [PATCH 2/2] arm: dts: k3-am625: " Nishanth Menon
2023-09-12 6:47 ` Dhruva Gole
@ 2023-09-12 12:11 ` Mattijs Korpershoek
2023-09-19 15:14 ` Tom Rini
2 siblings, 0 replies; 9+ messages in thread
From: Mattijs Korpershoek @ 2023-09-12 12:11 UTC (permalink / raw)
To: Nishanth Menon, Neha Francis, Tom Rini
Cc: Bryan, Praneeth, Andrew, Robert Nelson, Vignesh, u-boot,
Jan Kiszka, Marcel Ziswiler, Francesco Dolcini, Emanuele Ghidoli,
Nishanth Menon
On lun., sept. 11, 2023 at 09:02, Nishanth Menon <nm@ti.com> wrote:
> Sync device tree with v6.6-rc1
>
> Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
> ---
> arch/arm/dts/k3-am62-main.dtsi | 52 ++++++++-
> arch/arm/dts/k3-am62-mcu.dtsi | 24 +++++
> arch/arm/dts/k3-am62-verdin-dev.dtsi | 50 +++++++++
> arch/arm/dts/k3-am62-verdin.dtsi | 45 +++++++-
> arch/arm/dts/k3-am62.dtsi | 8 ++
> arch/arm/dts/k3-am625-beagleplay.dts | 154 ++++++++++++++++++++++++++-
> arch/arm/dts/k3-am625-sk.dts | 2 +-
> 7 files changed, 325 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/dts/k3-am62-main.dtsi b/arch/arm/dts/k3-am62-main.dtsi
> index 2488e3a537fe..284b90c94da8 100644
> --- a/arch/arm/dts/k3-am62-main.dtsi
> +++ b/arch/arm/dts/k3-am62-main.dtsi
> @@ -55,11 +55,29 @@
> #phy-cells = <1>;
> };
>
> - epwm_tbclk: clock@4130 {
> - compatible = "ti,am62-epwm-tbclk", "syscon";
> + epwm_tbclk: clock-controller@4130 {
> + compatible = "ti,am62-epwm-tbclk";
> reg = <0x4130 0x4>;
> #clock-cells = <1>;
> };
> +
> + audio_refclk0: clock-controller@82e0 {
> + compatible = "ti,am62-audio-refclk";
> + reg = <0x82e0 0x4>;
> + clocks = <&k3_clks 157 0>;
> + assigned-clocks = <&k3_clks 157 0>;
> + assigned-clock-parents = <&k3_clks 157 8>;
> + #clock-cells = <0>;
> + };
> +
> + audio_refclk1: clock-controller@82e4 {
> + compatible = "ti,am62-audio-refclk";
> + reg = <0x82e4 0x4>;
> + clocks = <&k3_clks 157 10>;
> + assigned-clocks = <&k3_clks 157 10>;
> + assigned-clock-parents = <&k3_clks 157 18>;
> + #clock-cells = <0>;
> + };
> };
>
> dmss: bus@48000000 {
> @@ -174,7 +192,6 @@
> crypto: crypto@40900000 {
> compatible = "ti,am62-sa3ul";
> reg = <0x00 0x40900000 0x00 0x1200>;
> - power-domains = <&k3_pds 70 TI_SCI_PD_SHARED>;
> #address-cells = <2>;
> #size-cells = <2>;
> ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
> @@ -590,7 +607,7 @@
>
> usb0: usb@31000000 {
> compatible = "snps,dwc3";
> - reg =<0x00 0x31000000 0x00 0x50000>;
> + reg = <0x00 0x31000000 0x00 0x50000>;
> interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
> <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
> interrupt-names = "host", "peripheral";
> @@ -613,7 +630,7 @@
>
> usb1: usb@31100000 {
> compatible = "snps,dwc3";
> - reg =<0x00 0x31100000 0x00 0x50000>;
> + reg = <0x00 0x31100000 0x00 0x50000>;
> interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
> <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
> interrupt-names = "host", "peripheral";
> @@ -718,6 +735,31 @@
> };
> };
>
> + dss: dss@30200000 {
> + compatible = "ti,am625-dss";
> + reg = <0x00 0x30200000 0x00 0x1000>, /* common */
> + <0x00 0x30202000 0x00 0x1000>, /* vidl1 */
> + <0x00 0x30206000 0x00 0x1000>, /* vid */
> + <0x00 0x30207000 0x00 0x1000>, /* ovr1 */
> + <0x00 0x30208000 0x00 0x1000>, /* ovr2 */
> + <0x00 0x3020a000 0x00 0x1000>, /* vp1: Used for OLDI */
> + <0x00 0x3020b000 0x00 0x1000>; /* vp2: Used as DPI Out */
> + reg-names = "common", "vidl1", "vid",
> + "ovr1", "ovr2", "vp1", "vp2";
> + power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 186 6>,
> + <&dss_vp1_clk>,
> + <&k3_clks 186 2>;
> + clock-names = "fck", "vp1", "vp2";
> + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> +
> + dss_ports: ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +
> hwspinlock: spinlock@2a000000 {
> compatible = "ti,am64-hwspinlock";
> reg = <0x00 0x2a000000 0x00 0x1000>;
> diff --git a/arch/arm/dts/k3-am62-mcu.dtsi b/arch/arm/dts/k3-am62-mcu.dtsi
> index 19fc38157d94..80a3e1db26a9 100644
> --- a/arch/arm/dts/k3-am62-mcu.dtsi
> +++ b/arch/arm/dts/k3-am62-mcu.dtsi
> @@ -147,4 +147,28 @@
> /* Tightly coupled to M4F */
> status = "reserved";
> };
> +
> + mcu_mcan0: can@4e08000 {
> + compatible = "bosch,m_can";
> + reg = <0x00 0x4e08000 0x00 0x200>,
> + <0x00 0x4e00000 0x00 0x8000>;
> + reg-names = "m_can", "message_ram";
> + power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 188 6>, <&k3_clks 188 1>;
> + clock-names = "hclk", "cclk";
> + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
> + status = "disabled";
> + };
> +
> + mcu_mcan1: can@4e18000 {
> + compatible = "bosch,m_can";
> + reg = <0x00 0x4e18000 0x00 0x200>,
> + <0x00 0x4e10000 0x00 0x8000>;
> + reg-names = "m_can", "message_ram";
> + power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 189 6>, <&k3_clks 189 1>;
> + clock-names = "hclk", "cclk";
> + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
> + status = "disabled";
> + };
> };
> diff --git a/arch/arm/dts/k3-am62-verdin-dev.dtsi b/arch/arm/dts/k3-am62-verdin-dev.dtsi
> index 846caee7dfa4..6701cb8974bb 100644
> --- a/arch/arm/dts/k3-am62-verdin-dev.dtsi
> +++ b/arch/arm/dts/k3-am62-verdin-dev.dtsi
> @@ -8,6 +8,42 @@
> * https://www.toradex.com/products/carrier-board/verdin-development-board-kit
> */
>
> +/ {
> + sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,bitclock-master = <&codec_dai>;
> + simple-audio-card,format = "i2s";
> + simple-audio-card,frame-master = <&codec_dai>;
> + simple-audio-card,name = "verdin-nau8822";
> + simple-audio-card,routing =
> + "Headphones", "LHP",
> + "Headphones", "RHP",
> + "Speaker", "LSPK",
> + "Speaker", "RSPK",
> + "Line Out", "AUXOUT1",
> + "Line Out", "AUXOUT2",
> + "LAUX", "Line In",
> + "RAUX", "Line In",
> + "LMICP", "Mic In",
> + "RMICP", "Mic In";
> + simple-audio-card,widgets =
> + "Headphones", "Headphones",
> + "Line Out", "Line Out",
> + "Speaker", "Speaker",
> + "Microphone", "Mic In",
> + "Line", "Line In";
> +
> + codec_dai: simple-audio-card,codec {
> + clocks = <&audio_refclk1>;
> + sound-dai = <&nau8822_1a>;
> + };
> +
> + simple-audio-card,cpu {
> + sound-dai = <&mcasp0>;
> + };
> + };
> +};
> +
> /* Verdin ETHs */
> &cpsw3g {
> pinctrl-names = "default";
> @@ -65,6 +101,15 @@
> &main_i2c1 {
> status = "okay";
>
> + /* Audio Codec */
> + nau8822_1a: audio-codec@1a {
> + compatible = "nuvoton,nau8822";
> + reg = <0x1a>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2s1_mclk>;
> + #sound-dai-cells = <0>;
> + };
> +
> /* IO Expander */
> gpio_expander_21: gpio@21 {
> compatible = "nxp,pcal6416";
> @@ -144,6 +189,11 @@
> status = "okay";
> };
>
> +/* Verdin CAN_2 */
> +&mcu_mcan0 {
> + status = "okay";
> +};
> +
> /* Verdin UART_4 */
> &mcu_uart0 {
> status = "okay";
> diff --git a/arch/arm/dts/k3-am62-verdin.dtsi b/arch/arm/dts/k3-am62-verdin.dtsi
> index 57dd061911ab..40992e7e4c30 100644
> --- a/arch/arm/dts/k3-am62-verdin.dtsi
> +++ b/arch/arm/dts/k3-am62-verdin.dtsi
> @@ -19,6 +19,8 @@
> };
>
> aliases {
> + can0 = &main_mcan0;
> + can1 = &mcu_mcan0;
> ethernet0 = &cpsw_port1;
> ethernet1 = &cpsw_port2;
> i2c0 = &main_i2c0;
> @@ -732,6 +734,14 @@
> >;
> };
>
> + /* Verdin CAN_2 */
> + pinctrl_mcu_mcan0: mcu-mcan0-default-pins {
> + pinctrl-single,pins = <
> + AM62X_MCU_IOPAD(0x0038, PIN_INPUT, 0) /* (B3) MCU_MCAN0_RX */ /* SODIMM 26 */
> + AM62X_MCU_IOPAD(0x0034, PIN_OUTPUT, 0) /* (D6) MCU_MCAN0_TX */ /* SODIMM 24 */
> + >;
> + };
> +
> /* Verdin UART_4 - Reserved to Cortex-M4 */
> pinctrl_mcu_uart0: mcu-uart0-default-pins {
> pinctrl-single,pins = <
> @@ -758,6 +768,11 @@
> };
> };
>
> +/* VERDIN I2S_1_MCLK */
> +&audio_refclk1 {
> + assigned-clock-rates = <25000000>;
> +};
> +
> &cpsw3g {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_rgmii1>;
> @@ -800,6 +815,26 @@
> };
> };
>
> +&dss {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_parallel_rgb>;
> + status = "disabled";
> +};
> +
> +&dss_ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* VP2: DPI Output */
> + port@1 {
> + reg = <1>;
> +
> + dpi_out: endpoint {
> + remote-endpoint = <&rgb_in>;
> + };
> + };
> +};
> +
> /* Verdin PWM_1, PWM_2 */
> &epwm0 {
> pinctrl-names = "default";
> @@ -1036,6 +1071,7 @@
>
> rgb_in: endpoint {
> data-lines = <18>;
> + remote-endpoint = <&dpi_out>;
> };
> };
>
> @@ -1238,8 +1274,6 @@
> status = "disabled";
> };
>
> -/* Verdin CAN_2 - Reserved to Cortex-M4 */
> -
> /* Verdin SPI_1 */
> &main_spi1 {
> pinctrl-names = "default";
> @@ -1333,6 +1367,13 @@
> "";
> };
>
> +/* Verdin CAN_2 */
> +&mcu_mcan0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_mcu_mcan0>;
> + status = "disabled";
> +};
> +
> /* Verdin UART_4 - Cortex-M4 UART */
> &mcu_uart0 {
> pinctrl-names = "default";
> diff --git a/arch/arm/dts/k3-am62.dtsi b/arch/arm/dts/k3-am62.dtsi
> index 5e72c445f37a..11f14eef2d44 100644
> --- a/arch/arm/dts/k3-am62.dtsi
> +++ b/arch/arm/dts/k3-am62.dtsi
> @@ -102,6 +102,14 @@
> };
> };
>
> + dss_vp1_clk: clock-divider-oldi {
> + compatible = "fixed-factor-clock";
> + clocks = <&k3_clks 186 0>;
> + #clock-cells = <0>;
> + clock-div = <7>;
> + clock-mult = <1>;
> + };
> +
> #include "k3-am62-thermal.dtsi"
> };
>
> diff --git a/arch/arm/dts/k3-am625-beagleplay.dts b/arch/arm/dts/k3-am625-beagleplay.dts
> index 589bf998bc52..7cfdf562b53b 100644
> --- a/arch/arm/dts/k3-am625-beagleplay.dts
> +++ b/arch/arm/dts/k3-am625-beagleplay.dts
> @@ -14,7 +14,7 @@
> #include "k3-am625.dtsi"
>
> / {
> - compatible = "beagle,am625-beagleplay", "ti,am625";
> + compatible = "beagle,am625-beagleplay", "ti,am625";
> model = "BeagleBoard.org BeaglePlay";
>
> aliases {
> @@ -192,6 +192,34 @@
>
> };
>
> + hdmi0: connector-hdmi {
> + compatible = "hdmi-connector";
> + label = "hdmi";
> + type = "a";
> + port {
> + hdmi_connector_in: endpoint {
> + remote-endpoint = <&it66121_out>;
> + };
> + };
> + };
> +
> + sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "it66121 HDMI";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,bitclock-master = <&hdmi_dailink_master>;
> + simple-audio-card,frame-master = <&hdmi_dailink_master>;
> +
> + hdmi_dailink_master: simple-audio-card,cpu {
> + sound-dai = <&mcasp1>;
> + system-clock-direction-out;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&it66121>;
> + };
> + };
> +
> /* Workaround for errata i2329 - just use mdio bitbang */
> mdio0: mdio {
> compatible = "virtual,mdio-gpio";
> @@ -422,6 +450,57 @@
> AM62X_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (D16) EXTINTn */
> >;
> };
> +
> + hdmi_gpio_pins_default: hdmi-gpio-default-pins {
> + pinctrl-single,pins = <
> + AM62X_IOPAD(0x0094, PIN_INPUT_PULLUP | PIN_DEBOUNCE_CONF6, 7) /* (N20) GPMC0_BE1n.GPIO0_36 */
> + AM62X_IOPAD(0x0054, PIN_OUTPUT_PULLUP, 7) /* (P21) GPMC0_AD6.GPIO0_21 */
> + >;
> + };
> +
> + mcasp_hdmi_pins_default: mcasp-hdmi-default-pins {
> + pinctrl-single,pins = <
> + AM62X_IOPAD(0x0090, PIN_INPUT, 2) /* (M24) GPMC0_BE0n_CLE.MCASP1_ACLKX */
> + AM62X_IOPAD(0x0098, PIN_INPUT, 2) /* (U23) GPMC0_WAIT0.MCASP1_AFSX */
> + AM62X_IOPAD(0x008c, PIN_OUTPUT, 2) /* (L25) GPMC0_WEn.MCASP1_AXR0 */
> + AM62X_IOPAD(0x0088, PIN_INPUT, 2) /* (L24) GPMC0_OEn_REn.MCASP1_AXR1 */
> + AM62X_IOPAD(0x0084, PIN_INPUT, 2) /* (L23) GPMC0_ADVn_ALE.MCASP1_AXR2 */
> + AM62X_IOPAD(0x007c, PIN_INPUT, 2) /* (P25) GPMC0_CLK.MCASP1_AXR3 */
> + >;
> + };
> +
> + dss0_pins_default: dss0-default-pins {
> + pinctrl-single,pins = <
> + AM62X_IOPAD(0x0100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
> + AM62X_IOPAD(0x00f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
> + AM62X_IOPAD(0x0104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
> + AM62X_IOPAD(0x00fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
> + AM62X_IOPAD(0x00b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
> + AM62X_IOPAD(0x00bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
> + AM62X_IOPAD(0x00c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
> + AM62X_IOPAD(0x00c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
> + AM62X_IOPAD(0x00c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
> + AM62X_IOPAD(0x00cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
> + AM62X_IOPAD(0x00d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
> + AM62X_IOPAD(0x00d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
> + AM62X_IOPAD(0x00d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
> + AM62X_IOPAD(0x00dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
> + AM62X_IOPAD(0x00e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
> + AM62X_IOPAD(0x00e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
> + AM62X_IOPAD(0x00e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
> + AM62X_IOPAD(0x00ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
> + AM62X_IOPAD(0x00f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
> + AM62X_IOPAD(0x00f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
> + AM62X_IOPAD(0x005c, PIN_OUTPUT, 1) /* (R24) GPMC0_AD8.VOUT0_DATA16 */
> + AM62X_IOPAD(0x0060, PIN_OUTPUT, 1) /* (R25) GPMC0_AD9.VOUT0_DATA17 */
> + AM62X_IOPAD(0x0064, PIN_OUTPUT, 1) /* (T25) GPMC0_AD10.VOUT0_DATA18 */
> + AM62X_IOPAD(0x0068, PIN_OUTPUT, 1) /* (R21) GPMC0_AD11.VOUT0_DATA19 */
> + AM62X_IOPAD(0x006c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */
> + AM62X_IOPAD(0x0070, PIN_OUTPUT, 1) /* (T24) GPMC0_AD13.VOUT0_DATA21 */
> + AM62X_IOPAD(0x0074, PIN_OUTPUT, 1) /* (U25) GPMC0_AD14.VOUT0_DATA22 */
> + AM62X_IOPAD(0x0078, PIN_OUTPUT, 1) /* (U24) GPMC0_AD15.VOUT0_DATA23 */
> + >;
> + };
> };
>
> &mcu_pmx0 {
> @@ -432,7 +511,7 @@
> >;
> };
>
> - gbe_pmx_obsclk: gbe-pmx-clk-default {
> + gbe_pmx_obsclk: gbe-pmx-obsclk-default-pins {
> pinctrl-single,pins = <
> AM62X_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (B8) MCU_SPI0_CS1.MCU_OBSCLK0 */
> >;
> @@ -670,6 +749,42 @@
> pinctrl-0 = <&i2c2_1v8_pins_default>;
> clock-frequency = <100000>;
> status = "okay";
> +
> + it66121: bridge-hdmi@4c {
> + compatible = "ite,it66121";
> + reg = <0x4c>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hdmi_gpio_pins_default>;
> + vcn33-supply = <&vdd_3v3>;
> + vcn18-supply = <&buck2_reg>;
> + vrf12-supply = <&buck3_reg>;
> + reset-gpios = <&main_gpio0 21 GPIO_ACTIVE_LOW>;
> + interrupt-parent = <&main_gpio0>;
> + interrupts = <36 IRQ_TYPE_EDGE_FALLING>;
> + #sound-dai-cells = <0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + it66121_in: endpoint {
> + bus-width = <24>;
> + remote-endpoint = <&dpi1_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + it66121_out: endpoint {
> + remote-endpoint = <&hdmi_connector_in>;
> + };
> + };
> + };
> + };
> };
>
> &main_i2c3 {
> @@ -756,3 +871,38 @@
> pinctrl-0 = <&wifi_debug_uart_pins_default>;
> status = "okay";
> };
> +
> +&dss {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&dss0_pins_default>;
> +};
> +
> +&dss_ports {
> + /* VP2: DPI Output */
> + port@1 {
> + reg = <1>;
> +
> + dpi1_out: endpoint {
> + remote-endpoint = <&it66121_in>;
> + };
> + };
> +};
> +
> +&mcasp1 {
> + status = "okay";
> + #sound-dai-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&mcasp_hdmi_pins_default>;
> + auxclk-fs-ratio = <2177>;
> + op-mode = <0>; /* MCASP_IIS_MODE */
> + tdm-slots = <2>;
> + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
> + 1 0 0 0
> + 0 0 0 0
> + 0 0 0 0
> + 0 0 0 0
> + >;
> + tx-num-evt = <32>;
> + rx-num-evt = <32>;
> +};
> diff --git a/arch/arm/dts/k3-am625-sk.dts b/arch/arm/dts/k3-am625-sk.dts
> index 3f9ef4053aa6..7c98c1b855d1 100644
> --- a/arch/arm/dts/k3-am625-sk.dts
> +++ b/arch/arm/dts/k3-am625-sk.dts
> @@ -212,7 +212,7 @@
> pinctrl-names = "default";
> pinctrl-0 = <&ospi0_pins_default>;
>
> - flash@0{
> + flash@0 {
> compatible = "jedec,spi-nor";
> reg = <0x0>;
> spi-tx-bus-width = <8>;
> --
> 2.40.0
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/2] arm: dts: k3-pinctrl: Sync with kernel v6.6-rc1
2023-09-11 14:02 ` [PATCH 1/2] arm: dts: k3-pinctrl: " Nishanth Menon
2023-09-12 7:04 ` Dhruva Gole
2023-09-12 12:08 ` Mattijs Korpershoek
@ 2023-09-19 15:14 ` Tom Rini
2 siblings, 0 replies; 9+ messages in thread
From: Tom Rini @ 2023-09-19 15:14 UTC (permalink / raw)
To: Nishanth Menon
Cc: Neha Francis, Bryan, Praneeth, Andrew, Robert Nelson, Vignesh,
u-boot, Mattijs Korpershoek, Jan Kiszka, Marcel Ziswiler,
Francesco Dolcini, Emanuele Ghidoli
[-- Attachment #1: Type: text/plain, Size: 308 bytes --]
On Mon, Sep 11, 2023 at 09:02:55AM -0500, Nishanth Menon wrote:
> Sync pinctrl header with v6.6-rc1
>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> Reviewed-by: Dhruva Gole <d-gole@ti.com>
> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Applied to u-boot/next, thanks!
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/2] arm: dts: k3-am625: Sync with kernel v6.6-rc1
2023-09-11 14:02 ` [PATCH 2/2] arm: dts: k3-am625: " Nishanth Menon
2023-09-12 6:47 ` Dhruva Gole
2023-09-12 12:11 ` Mattijs Korpershoek
@ 2023-09-19 15:14 ` Tom Rini
2 siblings, 0 replies; 9+ messages in thread
From: Tom Rini @ 2023-09-19 15:14 UTC (permalink / raw)
To: Nishanth Menon
Cc: Neha Francis, Bryan, Praneeth, Andrew, Robert Nelson, Vignesh,
u-boot, Mattijs Korpershoek, Jan Kiszka, Marcel Ziswiler,
Francesco Dolcini, Emanuele Ghidoli
[-- Attachment #1: Type: text/plain, Size: 305 bytes --]
On Mon, Sep 11, 2023 at 09:02:56AM -0500, Nishanth Menon wrote:
> Sync device tree with v6.6-rc1
>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> Reviewed-by: Dhruva Gole <d-gole@ti.com>
> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Applied to u-boot/next, thanks!
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2023-09-19 15:15 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-09-11 14:02 [PATCH 0/2] arm: dts: k3-am625: Sync with kernel v6.6-rc1 Nishanth Menon
2023-09-11 14:02 ` [PATCH 1/2] arm: dts: k3-pinctrl: " Nishanth Menon
2023-09-12 7:04 ` Dhruva Gole
2023-09-12 12:08 ` Mattijs Korpershoek
2023-09-19 15:14 ` Tom Rini
2023-09-11 14:02 ` [PATCH 2/2] arm: dts: k3-am625: " Nishanth Menon
2023-09-12 6:47 ` Dhruva Gole
2023-09-12 12:11 ` Mattijs Korpershoek
2023-09-19 15:14 ` Tom Rini
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox