[U-Boot-Users] [PATCH] USB OHCI driver: Add NEC's PCI OHCI module ID

[U-Boot-Users] [PATCH] USB OHCI driver: Add NEC's PCI OHCI module ID

[David Saada]

Description: Add NEC's PCI OHCI module ID to the USB OHCI driver

Signed-off-by: David Saada <david.saada@ecitele.com>

diff -purN usb_ohci.c.orig usb_ohci.c

--- usb_ohci.c.orig     2007-09-11 15:59:55.780415000 +0300
+++ usb_ohci.c  2007-09-16 09:52:06.146578000 +0200
@@ -93,6 +93,7 @@
#ifdef CONFIG_PCI_OHCI
static struct pci_device_id ohci_pci_ids[] = {
       {0x10b9, 0x5237},       /* ULI1575 PCI OHCI module ids */
+       {0x1033, 0x0035},       /* NEC PCI OHCI module ids */
       /* Please add supported PCI OHCI controller ids here */
       {0, 0}
};

-- 
View this message in context: http://www.nabble.com/-PATCH--USB-OHCI-driver%3A-Add-NEC%27s-PCI-OHCI-module-ID-tf4450412.html#a12697486
Sent from the Uboot - Users mailing list archive at Nabble.com.

[U-Boot-Users] [PATCH] USB OHCI driver: Add NEC's PCI OHCI module ID

[Markus Klotzbücher]

Dear David,

David Saada <David.Saada@ecitele.com> writes:

> Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
>
> Signed-off-by: David Saada <david.saada@ecitele.com>
>
> diff -purN usb_ohci.c.orig usb_ohci.c

I guess this is against drivers/usb_ohci.c, right?

Best regards

Markus Klotzbuecher

--
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de

[U-Boot-Users] [PATCH] USB OHCI driver: Add NEC's PCI OHCI module ID

[Wolfgang Denk]

In message <12697486.post@talk.nabble.com> you wrote:
> 
> Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
> 
> Signed-off-by: David Saada <david.saada@ecitele.com>
> 
> diff -purN usb_ohci.c.orig usb_ohci.c
> 
> --- usb_ohci.c.orig     2007-09-11 15:59:55.780415000 +0300
> +++ usb_ohci.c  2007-09-16 09:52:06.146578000 +0200
> @@ -93,6 +93,7 @@
> #ifdef CONFIG_PCI_OHCI
> static struct pci_device_id ohci_pci_ids[] = {
>        {0x10b9, 0x5237},       /* ULI1575 PCI OHCI module ids */
> +       {0x1033, 0x0035},       /* NEC PCI OHCI module ids */
>        /* Please add supported PCI OHCI controller ids here */
>        {0, 0}
> };

Please use TABs for indentation - please clean up and resubmit.

[U-Boot-Users] [PATCH] USB OHCI driver: Add NEC's PCI OHCI module ID

[David Saada]

Patch resubmitted. I hope the tabs are ok now - please tell me if not (I post
via the Nabble forum). 

Description: Add NEC's PCI OHCI module ID to the USB OHCI driver

Signed-off-by: David Saada <david.saada@ecitele.com>

diff -purN drivers/usb_ohci.c.orig drivers/usb_ohci.c

--- drivers/usb_ohci.c.orig	2007-09-11 15:59:55.780415000 +0300
+++ drivers/usb_ohci.c	2007-09-16 09:52:06.146578000 +0200
@@ -93,6 +93,7 @@
 #ifdef CONFIG_PCI_OHCI
 static struct pci_device_id ohci_pci_ids[] = {
 	{0x10b9, 0x5237},	/* ULI1575 PCI OHCI module ids */
+	{0x1033, 0x0035},	/* NEC PCI OHCI module ids */
 	/* Please add supported PCI OHCI controller ids here */
	{0, 0}
 };


-- 
View this message in context: http://www.nabble.com/-PATCH--USB-OHCI-driver%3A-Add-NEC%27s-PCI-OHCI-module-ID-tf4450412.html#a12734121
Sent from the Uboot - Users mailing list archive at Nabble.com.

[U-Boot-Users] [PATCH] USB OHCI driver: Add NEC's PCI OHCI module ID

[Markus Klotzbücher]

David Saada <David.Saada@ecitele.com> writes:

> Patch resubmitted. I hope the tabs are ok now - please tell me if not
> (I post via the Nabble forum).

Thanks, patch added to USB Custodian repo.

Best regards

Markus Klotzbuecher

--
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de

[U-Boot-Users] [PATCH] USB OHCI driver: Add NEC's PCI OHCI module ID

[Wolfgang Denk]

In message <873axdtj9r.fsf@denx.de> you wrote:
> 
> David Saada <David.Saada@ecitele.com> writes:
> 
> > Patch resubmitted. I hope the tabs are ok now - please tell me if not
> > (I post via the Nabble forum).
> 
> Thanks, patch added to USB Custodian repo.

Should that go into 1.3.0?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Sometimes, too long is too long.                          - Joe Crowe

[U-Boot-Users] [USB] Pull Request: git://www.denx.de/git/u-boot-usb.git

[Markus Klotzbücher]

Hi Wolfgang,

Wolfgang Denk <wd@denx.de> writes:

> In message <873axdtj9r.fsf@denx.de> you wrote:
>> 
>> David Saada <David.Saada@ecitele.com> writes:
>> 
>> > Patch resubmitted. I hope the tabs are ok now - please tell me if not
>> > (I post via the Nabble forum).
>> 
>> Thanks, patch added to USB Custodian repo.
>
> Should that go into 1.3.0?

Yes please:

The following changes since commit
67c31036acaaaa992fc346cc89db0909a7e733c4:
  Wolfgang Denk (1):
        TQM8xx[LM]: Fix broken environment alignment.

are available in the git repository at:

  git://www.denx.de/git/u-boot-usb.git master

David Saada (1):
      Description: Add NEC's PCI OHCI module ID to the USB OHCI driver

Markus Klotzbuecher (1):
      Merge with git://www.denx.de/git/u-boot.git

 drivers/usb_ohci.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)


Viele Gr??e / Best regards

Markus Klotzb?cher

--
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de

[U-Boot-Users] [USB] Pull Request: git://www.denx.de/git/u-boot-usb.git

[Wolfgang Denk]

In message <87r6kvqbj5.fsf@denx.de> you wrote:
> 
> The following changes since commit
> 67c31036acaaaa992fc346cc89db0909a7e733c4:
>   Wolfgang Denk (1):
>         TQM8xx[LM]: Fix broken environment alignment.
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-usb.git master

Merged. Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If I ever needed a brain transplant, I'd choose a teenager's  because
I'd want a brain that had never been used.

[U-Boot-Users] [Microblaze] Pull Request: git://www.denx.de/git/u-boot-microblaze.git merge branch

[Michal Simek]

Please pull from git://denx.de/git/u-boot-microblaze.git merge

Thanks
Michal Simek

The following changes since commit b90c045f035c3cc9b5d2edaed6048dfb74e40763:
  Michal Simek (1):
        synchronizition with mainline

are found in the git repository at:

  git://www.denx.de/git/u-boot.git

Michal Simek (8):
      [FIX] repair MFSL commands
      [FIX] repair email address
      [FIX] resolve problem with cpu without barrel shifter
      Add support for design without interrupt controller
      Change macro name for UartLite
      [FIX] Email reparation & Copyright
      [FIX] change sets of commands
      [FIX] change command handling and removing code violation

 common/cmd_mfsl.c          |   16 ++++++------
 cpu/microblaze/cache.c     |    2 +-
 cpu/microblaze/start.S     |    6 +---
 cpu/microblaze/timer.c     |    7 +++++
 drivers/serial_xuartlite.c |    2 +-
 include/configs/ml401.h    |   53 
+++++++++++++++++++++----------------------
 include/configs/suzaku.h   |   19 +++++++--------
 include/configs/xupv2p.h   |    3 +-
 lib_microblaze/time.c      |    8 ++++++
 9 files changed, 64 insertions(+), 52 deletions(-) 

[U-Boot-Users] [Microblaze] Pull Request: git://www.denx.de/git/u-boot-microblaze.git merge branch

[Wolfgang Denk]

In message <001101c7fe27$252a5760$0200a8c0@monstrone> you wrote:
> Please pull from git://denx.de/git/u-boot-microblaze.git merge

Please don't do that. Please put the stuff for me to merge in the
master branch.

I'll make an exception this time, but only this time.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
God is real, unless declared integer.

[U-Boot-Users] [Microblaze] Pull Request: git://www.denx.de/git/u-boot-microblaze.git merge branch

[Grant Likely]

On 10/13/07, Wolfgang Denk <wd@denx.de> wrote:
> In message <001101c7fe27$252a5760$0200a8c0@monstrone> you wrote:
> > Please pull from git://denx.de/git/u-boot-microblaze.git merge
>
> Please don't do that. Please put the stuff for me to merge in the
> master branch.

Really?  It's perfectly reasonable for custodians to have multiple
branches and to request for you to pull from a specific one.  This
becomes especially true with the adoption of the merge window process.
 For instance, I have two branches on the 5xxx tree; one for bugfixes
to be merged immediately and another for stuff queued up for the next
window.

Besides, when someone uses git-request-pull (like Michal did) it's a
pretty trivial cut/paste to use git-pull to bring it into your branch.
 It's not like it causes you extra work.  :-)

Cheers,
g.

-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
grant.likely at secretlab.ca
(403) 399-0195

[U-Boot-Users] [Microblaze] Pull Request: git://www.denx.de/git/u-boot-microblaze.git merge branch

[Wolfgang Denk]

In message <fa686aa40710131739u31ab087axe554ab04fbb6b2c5@mail.gmail.com> you wrote:
>
> Really?  It's perfectly reasonable for custodians to have multiple
> branches and to request for you to pull from a specific one.  This

It is definitely perfectly reasonable to have multiple branches
(otherwise we might go back to CVS - shudder).

But if you want to make life easy for me, then always use the same one
(ideally simply master) to request the poull from.

THis allows me to set up all the custodian repos as  remote  tracking
branches  in  one  remotes.<group>.  This  allows  me  to get a quick
overview. If you use several branches for oulling, it's pretty likely
that I miss the correct branch name in your pull request and  do  the
wrong thing.

> becomes especially true with the adoption of the merge window process.
>  For instance, I have two branches on the 5xxx tree; one for bugfixes
> to be merged immediately and another for stuff queued up for the next
> window.

You could merge the bugfixes branch into master immediately and the
other one when the next window opens?

> Besides, when someone uses git-request-pull (like Michal did) it's a
> pretty trivial cut/paste to use git-pull to bring it into your branch.

I don't pull immediately. I first fetch it into a local tracking
branch so I can review it more easily before merging it.

>  It's not like it causes you extra work.  :-)

That's exactly the problem: it *does* cause more work.


Maybe my usage of git is sub-optimal, I'm just learning. But it seems
to work pretty efficiet  to  me...  If  you  have  better  ideas  I'd
appreciate all tips and tricks...

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
CAUTION:  The Mass of This Product Contains the Energy Equivalent  of
85 Million Tons of TNT per Net Ounce of Weight.

[U-Boot-Users] [USB] Pull Request git://www.denx.de/git/u-boot-usb.git

[Markus Klotzbücher]

Dear Wolfgang,

Please pull from git://www.denx.de/git/u-boot-usb.git where the
following change can be found:

The following changes since commit
86ec86c04326c3913178a7679aa910de071da75d:
  Jean-Christophe PLAGNIOL-VILLARD (1):
        Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial

are available in the git repository at:

  git://www.denx.de/git/u-boot-usb.git master

Timo Ketola (1):
      Bugfix: Use only one PTD for one endpoint

 drivers/isp116x-hcd.c |  112
 +++++++++++++++++++++++++++++++-----------------
 1 files changed, 72 insertions(+), 40 deletions(-)


Best regards

Markus Klotzbuecher

--
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de

[U-Boot-Users] [USB] Pull Request git://www.denx.de/git/u-boot-usb.git

[Wolfgang Denk]

In message <87ir58a9u8.fsf@denx.de> you wrote:
> 
> Please pull from git://www.denx.de/git/u-boot-usb.git where the
> following change can be found:
> 
> The following changes since commit
> 86ec86c04326c3913178a7679aa910de071da75d:
>   Jean-Christophe PLAGNIOL-VILLARD (1):
>         Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-usb.git master
> 
> Timo Ketola (1):
>       Bugfix: Use only one PTD for one endpoint

Done. Thanks

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The connection between the language in which we think/program and the
problems and solutions we can imagine is very close. For this  reason
restricting  language  features  with  the intent of eliminating pro-
grammer errors is at best dangerous.
               - Bjarne Stroustrup in "The  C++ Programming Language"