Re: [PATCH 4/4] arm: dts: k3-am62p5-sk-u-boot: enable USB0 for USB DFU boot

[Mattijs Korpershoek <mkorpershoek@baylibre.com>]

Hi Siddharth,

Thank you for the patch.

On mar., déc. 17, 2024 at 18:46, Siddharth Vadapalli <s-vadapalli@ti.com> wrote:

> Enable USB0 instance of the USB controller for USB DFU boot functionality
> which requires the "bootph-all" property in order to have USB enabled at
> all stages of the USB DFU boot.
>
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>

Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>

> ---
>  arch/arm/dts/k3-am62p5-sk-u-boot.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/dts/k3-am62p5-sk-u-boot.dtsi b/arch/arm/dts/k3-am62p5-sk-u-boot.dtsi
> index cf087c6e343..c2091fc1a51 100644
> --- a/arch/arm/dts/k3-am62p5-sk-u-boot.dtsi
> +++ b/arch/arm/dts/k3-am62p5-sk-u-boot.dtsi
> @@ -16,3 +16,13 @@
>  &dmsc {
>  	bootph-pre-ram;
>  };
> +
> +/* Required for USB DFU boot */
> +&usbss0 {
> +	status = "okay";
> +};
> +
> +/* Required for USB DFU boot */
> +&usb0 {
> +	bootph-all;
> +};
> -- 
> 2.43.0