From: Mattijs Korpershoek <mkorpershoek@baylibre.com>
To: Quentin Schulz <foss+uboot@0leil.net>,
Jaehoon Chung <jh80.chung@samsung.com>,
Tom Rini <trini@konsulko.com>,
Kever Yang <kever.yang@rock-chips.com>
Cc: Simon Glass <sjg@chromium.org>,
u-boot@lists.denx.de, Quentin Schulz <quentin.schulz@cherry.de>
Subject: Re: [PATCH 3/3] regulator: rk8xx: clarify operator precedence
Date: Wed, 05 Jun 2024 13:20:26 +0200 [thread overview]
Message-ID: <87y17jhc05.fsf@baylibre.com> (raw)
In-Reply-To: <20240605-pmic-rk8xx-v1-3-2349fdf68aa0@cherry.de>
Hi Quentin,
Thank you for the patch.
On mer., juin 05, 2024 at 11:33, Quentin Schulz <foss+uboot@0leil.net> wrote:
> From: Quentin Schulz <quentin.schulz@cherry.de>
>
> My linter complains that the order isn't clear enough so let's put
> parentheses around the ternary condition to make it happy.
>
> Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
> ---
> drivers/power/regulator/rk8xx.c | 26 +++++++++++++-------------
> 1 file changed, 13 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/power/regulator/rk8xx.c b/drivers/power/regulator/rk8xx.c
> index bd5a37e718f..3125835bc07 100644
> --- a/drivers/power/regulator/rk8xx.c
> +++ b/drivers/power/regulator/rk8xx.c
> @@ -520,7 +520,7 @@ static int _buck_get_enable(struct udevice *pmic, int buck)
> if (ret < 0)
> return ret;
>
> - return ret & mask ? true : false;
> + return (ret & mask) ? true : false;
> }
>
> static int _buck_set_suspend_enable(struct udevice *pmic, int buck, bool enable)
> @@ -585,7 +585,7 @@ static int _buck_get_suspend_enable(struct udevice *pmic, int buck)
> val = pmic_reg_read(pmic, RK816_REG_DCDC_SLP_EN);
> if (val < 0)
> return val;
> - ret = val & mask ? 1 : 0;
> + ret = (val & mask) ? 1 : 0;
> break;
> case RK806_ID:
> {
> @@ -608,7 +608,7 @@ static int _buck_get_suspend_enable(struct udevice *pmic, int buck)
> val = pmic_reg_read(pmic, REG_SLEEP_SET_OFF1);
> if (val < 0)
> return val;
> - ret = val & mask ? 0 : 1;
> + ret = (val & mask) ? 0 : 1;
> break;
> case RK809_ID:
> case RK817_ID:
> @@ -620,7 +620,7 @@ static int _buck_get_suspend_enable(struct udevice *pmic, int buck)
> val = pmic_reg_read(pmic, RK817_POWER_SLP_EN(0));
> if (val < 0)
> return val;
> - ret = val & mask ? 1 : 0;
> + ret = (val & mask) ? 1 : 0;
> break;
> default:
> ret = -EINVAL;
> @@ -723,7 +723,7 @@ static int _ldo_get_enable(struct udevice *pmic, int ldo)
> if (ret < 0)
> return ret;
>
> - return ret & mask ? true : false;
> + return (ret & mask) ? true : false;
> }
>
> static int _nldo_get_enable(struct udevice *pmic, int nldo)
> @@ -980,7 +980,7 @@ static int _ldo_get_suspend_enable(struct udevice *pmic, int ldo)
> val = pmic_reg_read(pmic, RK816_REG_LDO_SLP_EN);
> if (val < 0)
> return val;
> - ret = val & mask ? 1 : 0;
> + ret = (val & mask) ? 1 : 0;
> break;
> case RK808_ID:
> case RK818_ID:
> @@ -988,7 +988,7 @@ static int _ldo_get_suspend_enable(struct udevice *pmic, int ldo)
> val = pmic_reg_read(pmic, REG_SLEEP_SET_OFF2);
> if (val < 0)
> return val;
> - ret = val & mask ? 0 : 1;
> + ret = (val & mask) ? 0 : 1;
> break;
> case RK809_ID:
> case RK817_ID:
> @@ -997,13 +997,13 @@ static int _ldo_get_suspend_enable(struct udevice *pmic, int ldo)
> val = pmic_reg_read(pmic, RK817_POWER_SLP_EN(0));
> if (val < 0)
> return val;
> - ret = val & mask ? 1 : 0;
> + ret = (val & mask) ? 1 : 0;
> } else {
> mask = 1 << ldo;
> val = pmic_reg_read(pmic, RK817_POWER_SLP_EN(1));
> if (val < 0)
> return val;
> - ret = val & mask ? 1 : 0;
> + ret = (val & mask) ? 1 : 0;
> }
> break;
> }
> @@ -1438,7 +1438,7 @@ static int switch_get_enable(struct udevice *dev)
> if (ret < 0)
> return ret;
>
> - return ret & mask ? true : false;
> + return (ret & mask) ? true : false;
> }
>
> static int switch_set_suspend_value(struct udevice *dev, int uvolt)
> @@ -1493,21 +1493,21 @@ static int switch_get_suspend_enable(struct udevice *dev)
> val = pmic_reg_read(dev->parent, REG_SLEEP_SET_OFF1);
> if (val < 0)
> return val;
> - ret = val & mask ? 0 : 1;
> + ret = (val & mask) ? 0 : 1;
> break;
> case RK809_ID:
> mask = 1 << (sw + 6);
> val = pmic_reg_read(dev->parent, RK817_POWER_SLP_EN(0));
> if (val < 0)
> return val;
> - ret = val & mask ? 1 : 0;
> + ret = (val & mask) ? 1 : 0;
> break;
> case RK818_ID:
> mask = 1 << 6;
> val = pmic_reg_read(dev->parent, REG_SLEEP_SET_OFF1);
> if (val < 0)
> return val;
> - ret = val & mask ? 0 : 1;
> + ret = (val & mask) ? 0 : 1;
> break;
> }
>
>
> --
> 2.45.1
next prev parent reply other threads:[~2024-06-05 11:20 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-05 9:33 [PATCH 0/3] rockchip: rk8xx: fix broken [np]ldo callbacks Quentin Schulz
2024-06-05 9:33 ` [PATCH 1/3] regulator: rk8xx: fix incorrect device used for _ldo_[sg]et_suspend_value Quentin Schulz
2024-06-06 6:45 ` Kever Yang
2024-06-06 15:04 ` Simon Glass
2024-06-05 9:33 ` [PATCH 2/3] regulator: rk8xx: pass pmic udevice instead of regulator to all internal functions Quentin Schulz
2024-06-06 6:45 ` Kever Yang
2024-06-06 15:04 ` Simon Glass
2024-06-05 9:33 ` [PATCH 3/3] regulator: rk8xx: clarify operator precedence Quentin Schulz
2024-06-05 11:20 ` Mattijs Korpershoek [this message]
2024-06-06 6:46 ` Kever Yang
2024-06-06 15:04 ` Simon Glass
2024-06-05 13:11 ` [PATCH 0/3] rockchip: rk8xx: fix broken [np]ldo callbacks Anand Moon
2024-06-05 16:00 ` Quentin Schulz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87y17jhc05.fsf@baylibre.com \
--to=mkorpershoek@baylibre.com \
--cc=foss+uboot@0leil.net \
--cc=jh80.chung@samsung.com \
--cc=kever.yang@rock-chips.com \
--cc=quentin.schulz@cherry.de \
--cc=sjg@chromium.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox