Re: [PATCH v3 13/13] imx8mp_evk: Enable display support

[Miquel Raynal <miquel.raynal@bootlin.com>]

Hello Fabio,

On 10/01/2025 at 15:53:35 -03, Fabio Estevam <festevam@gmail.com> wrote:

> Hi Peng,
>
> On Fri, Jan 10, 2025 at 3:43 PM Miquel Raynal <miquel.raynal@bootlin.com> wrote:
>>
>> There is now support for the display pipeline using one LCD interface,
>> the LDB bridge and of course the related media power domain controls.
>>
>> This is untested as I do not have the EVK but should be enough to use
>> the display, using bmp, lcdputs and co. For console-like commands, it
>> might be also needed to enable the VIDEO_CONSOLE explicitly using:
>>
>>      setenv stdout serial,vidconsole0
>
> I have access to an imx8mp-evk but don't have an LVDS panel to test.
>
> Could you please test this series on an imx8mp-evk + LVDS setup?

I only worked on a custom design based on a i.MX8MP. We do have an EVK,
but it has no display. I was asked to add a user, but in practice I
cannot test that. I can enable the ldb in the EVK DTS or drop that
patch.

Thanks,
Miquèl