From: Vagrant Cascadian <vagrant@debian.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 0/5] Add support for Pinebook
Date: Tue, 30 Oct 2018 14:36:18 -0700 [thread overview]
Message-ID: <87zhuv2k31.fsf@aikidev.net> (raw)
In-Reply-To: <20181028211901.1140-1-anarsoul@gmail.com>
Tested series applied to u-boot 2018.11-rc3 on pinebook, both with
reboot and cold boot.
Thanks for all the work on it!
Tested-by: Vagrant Cascadian <vagrant@debian.org>
On 2018-10-28, Vasily Khoruzhick wrote:
> This series adds support for the Pinebook, an allwinner A64 laptop
> produced by Pine64. It also syncs sun50i-a64.dtsi with linux,
> adds support for mmc delay calibration, R_I2C controller,
> and addresses the issue with activating video bridge when any of
> GPIOs is missing.
>
> v2: - sync sun50i-a64.dtsi with linux instead of adding missing nodes
> - take sun50i-a64-pinebook.dts from linux
> - don't introduce new Kconfig for A64 MMC calibration
> - improve code in video bridge uclass to check for presensce of
> GPIO instead of ingoring EINVAL errors
> v3: - enable calibration for H6 as well
> - init ret variable in video_bridge_set_active()
> - fix order of dts files Makefile
> - split anx6345 binding into sun50i-a64-pinebook-u-boot.dts
> - drop speaker_amp node from pinebook dts
> - drop unnecessary options from defconfig
> v4: - sync device tree files with linux-next
>
> Vasily Khoruzhick (5):
> mmc: sunxi: add support for automatic delay calibration
> dm: video: bridge: don't fail to activate bridge if reset or sleep
> GPIO is missing
> sunxi: DT: A64: update device tree files for Allwinner A64 SoC
> sun50i: A64: add support for R_I2C controller
> sunxi: DT: add support for Pinebook
>
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/sun50i-a64-amarula-relic.dts | 168 +++++++++-
> arch/arm/dts/sun50i-a64-bananapi-m64.dts | 34 +-
> arch/arm/dts/sun50i-a64-nanopi-a64.dts | 89 +++++-
> arch/arm/dts/sun50i-a64-olinuxino.dts | 103 +++++-
> arch/arm/dts/sun50i-a64-orangepi-win.dts | 179 ++++++++++-
> arch/arm/dts/sun50i-a64-pine64.dts | 32 +-
> arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi | 15 +
> arch/arm/dts/sun50i-a64-pinebook.dts | 294 +++++++++++++++++
> arch/arm/dts/sun50i-a64-sopine-baseboard.dts | 32 +-
> arch/arm/dts/sun50i-a64-sopine.dtsi | 15 +
> arch/arm/dts/sun50i-a64.dtsi | 313 +++++++++++++++++--
> arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
> arch/arm/include/asm/arch-sunxi/mmc.h | 6 +-
> arch/arm/mach-sunxi/Kconfig | 1 +
> board/sunxi/board.c | 6 +
> configs/pinebook_defconfig | 22 ++
> drivers/mmc/sunxi_mmc.c | 21 +-
> drivers/video/bridge/video-bridge-uclass.c | 16 +-
> 19 files changed, 1296 insertions(+), 52 deletions(-)
> create mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
> create mode 100644 arch/arm/dts/sun50i-a64-pinebook.dts
> create mode 100644 configs/pinebook_defconfig
>
> --
> 2.19.1
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 227 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181030/4b27f0c9/attachment.sig>
next prev parent reply other threads:[~2018-10-30 21:36 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-28 21:18 [U-Boot] [PATCH v4 0/5] Add support for Pinebook Vasily Khoruzhick
2018-10-28 21:18 ` [U-Boot] [PATCH v4 1/5] mmc: sunxi: add support for automatic delay calibration Vasily Khoruzhick
2018-10-28 21:18 ` [U-Boot] [PATCH v4 2/5] dm: video: bridge: don't fail to activate bridge if reset or sleep GPIO is missing Vasily Khoruzhick
2018-10-28 21:18 ` [U-Boot] [PATCH v4 3/5] sunxi: DT: A64: update device tree files for Allwinner A64 SoC Vasily Khoruzhick
2018-10-28 21:19 ` [U-Boot] [PATCH v4 4/5] sun50i: A64: add support for R_I2C controller Vasily Khoruzhick
2018-10-28 21:19 ` [U-Boot] [PATCH v4 5/5] sunxi: DT: add support for Pinebook Vasily Khoruzhick
2018-10-29 15:29 ` Loic Devulder
2018-10-29 16:59 ` Andre Przywara
2018-10-30 21:36 ` Vagrant Cascadian [this message]
2018-11-03 18:55 ` [U-Boot] [PATCH v4 0/5] Add " Dennis Gilmore
2018-11-03 20:18 ` Vasily Khoruzhick
2018-11-03 20:19 ` Vasily Khoruzhick
2018-11-03 21:15 ` André Przywara
2018-11-04 0:12 ` Vasily Khoruzhick
2018-11-05 15:30 ` Dennis Gilmore
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87zhuv2k31.fsf@aikidev.net \
--to=vagrant@debian.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox