[U-Boot-Users] U-boot fails with new versatile PB (lead-free version)

[T S Rajesh <tsrajesh.indian@gmail.com>]

Thanks Jerry,

The new board had flash 256L30B, which i see, was not supported in the
U-boot. I added the flash id, and it works ok. But i mam not sure if what i
did was correct ot not.. I handled this part exactly in the same way as the
older one (256K3). I think it should've been more like 256L18 (which is
already in the code..) but it gives some error of sector size more than
maximum.. Anyhow, It works and serves my purpose. Just to let people here
know so that the new part may be included in the next build of u-boot..

Thanks & Regards
Rajesh



Jerry Van Baren-2 wrote:
> 
> Hi Rajesh,
> 
> It looks like your memory part is different: the original flash has 256 
> equal size blocks, the new flash is "bottom boot" with four 64K blocks 
> in the lowest 256K area.  You probably need to do some configuration 
> (rebuild) u-boot for the different parts.
> 
> Beyond this general information I'm afraid I don't have enough knowledge 
> to help.
> 
> Best regards,
> gvb
> 

-- 
View this message in context: http://www.nabble.com/U-boot-fails-with-new-versatile-PB-%28lead-free-version%29-tf3166145.html#a8819337
Sent from the Uboot - Users mailing list archive at Nabble.com.