From: FLAMENT David <d.flament@sofrel.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] ETHERNET TX problem with ADS860 (MPC850), Using SCC ETHERNET device
Date: Wed, 30 Mar 2005 15:26:04 +0200 [thread overview]
Message-ID: <892C3EC180087B4498C69413FCCBB73201316469@sof_msg> (raw)
Hello,
I try to use a ADS860 with a MPC850.
I compile u-boot, dowload in flash and reset.
When reset, I see at prompt this :
Board: ADS rev PILOT
DRAM: 4M 60ns DRAM: 4 MB
FLASH: 2 MB
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
PCMCIA:No card present
Hit any key to stop autoboot: 0
## Booting image at fe080000 ...
Bad Magic Number
After I set configuration of IP service :
=>setenv ethaddr 00:01:02:2A:3B:4A;setenv serverip 172.17.21.30;setenv ipaddr 172.17.21.33;setenv gatewayip 172.17.0.1;setenv netmask 255.255.0.0;
And I try to ping to my host :
=>ping 172.17.21.30
Using SCC ETHERNET device
TX timeout
TX not ready
TX timeout
ping failed; host 172.17.21.30 is not alive
=>
Cable is tested, and I'm sure cable plugged into the right port because the led of ETH-0 and LD10 is on and indicate good link integrity on th TP port.
When ping, Ethernet TX indicator blinks (LD6) is not active but Ethernet RX indicator blinks is active when there are activity on networks ! I don't understand this !
If you are a idea ! please !
Thank you for your answer !
David Flament
--------------------------------
Flament David
d.flament at sofrel.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20050330/0b4f378d/attachment.htm
next reply other threads:[~2005-03-30 13:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-30 13:26 FLAMENT David [this message]
2005-03-31 18:32 ` [U-Boot-Users] ETHERNET TX problem with ADS860 (MPC850), Using SCC ETHERNET device Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=892C3EC180087B4498C69413FCCBB73201316469@sof_msg \
--to=d.flament@sofrel.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox