From mboxrd@z Thu Jan 1 00:00:00 1970 From: raj reddy Date: Thu, 6 Sep 2007 14:40:53 +0100 (BST) Subject: [U-Boot-Users] PPC 405 walnut In-Reply-To: <20070905125451.36AB9247AF@gemini.denx.de> Message-ID: <89616.95705.qm@web7709.mail.in.yahoo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de --- Wolfgang Denk wrote: > In message > <570161.51367.qm@web7707.mail.in.yahoo.com> you > wrote: > > > > My board is close to PPC405 Walnut board. But > there is slight modification in the FLASH chip and > SDRAM. > > close is not close enough. You have to do your own > port. > > > -> FLASH chip on my custom board is AT49BV320C > (flash interface 16Bits). How do I add this ATMEL > chip driver to the u-boot. > > Is it CFI conform? yes it Command Flash Interface only..I request someone to please throw light to comeout of this loop.... > > > -> SDRAM controller not read from EEPROM , i > want to hardcode the values of the SDRAM using the > sdram_init (i.e sdram.c) function instead of the > spd_sdram.c file. Do i need to change the function > implimentation init_func_ram() in the board.c file. > > init_func_ram() is a static function in > "lib_ppc/board.c" which you > should keep your fingers off. it is not affected by > a new board port. > > > --0-1855522460-1188986846=:51367 > > Content-Type: text/html; charset=iso-8859-1 > > Content-Transfer-Encoding: 8bit > > And never post HTML on this list, please! > > Best regards, > > Wolfgang Denk > > -- > DENX Software Engineering GmbH, MD: Wolfgang > Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 > Groebenzell, Germany > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 > Email: wd at denx.de > If a group of N persons implements a COBOL compiler, > there will be > N-1 passes. Someone in the group has to be the > manager. - T. Cheatham > Bollywood, fun, friendship, sports and more. You name it, we have it on http://in.groups.yahoo.com