From mboxrd@z Thu Jan  1 00:00:00 1970
From: Tirumala Marri <tmarri@apm.com>
Date: Mon, 30 Aug 2010 10:43:55 -0700
Subject: [U-Boot] [PATCH 6/8] APM82xxx: Add SRAM support
In-Reply-To: <4C778FE7.40401@mvista.com>
References: <1282856769-24580-1-git-send-email-tmarri@apm.com>
	<4C778FE7.40401@mvista.com>
Message-ID: <8a743b6a146f57340881bebd4e31d41f@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

>
> > Signed-off-by: Tirumala R Marri <tmarri@apm.com>
> [...]
> > diff --git a/arch/powerpc/include/asm/ppc4xx-isram.h
> b/arch/powerpc/include/asm/ppc4xx-isram.h
> > index d6d17ac..b723401 100644
> > --- a/arch/powerpc/include/asm/ppc4xx-isram.h
> > +++ b/arch/powerpc/include/asm/ppc4xx-isram.h
> > @@ -25,7 +25,8 @@
> >  /*
> >   * Internal SRAM
> >   */
> > -#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
> > +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) ||\
>
>     Please add space before \ to keep the style consistent.
[Marri] Sure will do

>
> > +    defined(CONFIG_APM82XXX)
> >  #define ISRAM0_DCR_BASE 0x380
> >  #else
> >  #define ISRAM0_DCR_BASE 0x020
> > @@ -42,7 +43,8 @@
> >  #define ISRAM0_REVID	(ISRAM0_DCR_BASE+0x09)	/* SRAM bus
revision id
> reg */
> >  #define ISRAM0_DPC	(ISRAM0_DCR_BASE+0x0a)	/* SRAM data parity
> check reg */
> >
> > -#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
> > +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) ||\
>
>     Same here...
[Marri] Ok

>
> > +    defined(CONFIG_APM82XXX)
> >  #define ISRAM1_DCR_BASE 0x0B0
> >  #define ISRAM1_SB0CR	(ISRAM1_DCR_BASE+0x00)	/* SRAM1 bank
config
> 0*/
> >  #define ISRAM1_BEAR	(ISRAM1_DCR_BASE+0x04)	/* SRAM1 bus error
addr
> reg */

Regards,
Marri