Re: [EXTERNAL] [PATCH 0/2] phy: ti: j721e-wiz: Add support to manage type-C swap on Lane2 and lane3

[Ravi Gunasekaran <r-gunasekaran@ti.com>]

On 13/03/23 6:12 pm, Sinthu Raja wrote:
> From: Sinthu Raja <sinthu.raja@ti.com>
> 
> Hi All,
> This series of patch add support to enable lane2 and lane3 swap by
> configuring the LN23 bit. Also, it's possible that the Type-C plug orientation
> on the DIR line will be implemented through hardware design. In that
> situation, there won't be an external GPIO line available, but the
> driver still needs to address this since the DT won't use the
> typec-gpio-dir property. Update code to handle if typec-dir-gpios property
> is not specified in DT.
> 
> Sinthu Raja (2):
>   phy: ti: j721e-wiz: Manage TypeC lane swap if typec-dir-gpios not
>     specified
>   phy: ti: j721e-wiz: Add support to enable LN23 Type-C swap
> 
>  drivers/phy/ti/phy-j721e-wiz.c | 58 ++++++++++++++++++++++++++++------
>  1 file changed, 49 insertions(+), 9 deletions(-)
> 

Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>

-- 
Regards,
Ravi