Re: [PATCH 1/2] arm: stm32mp: Fix USB boot device report

[Patrice CHOTARD <patrice.chotard@foss.st.com>]

Hi Marek

On 12/6/21 21:58, Marek Vasut wrote:
> In case the SoC reports the boot device type is USB, it means the SPL was
> loaded via BootROM DFU mode. Currently the spl_boot_device() returns boot
> device as USB host, change it to DFU instead, so the SPL can continue the
> DFU boot and load U-Boot via DFU.
> 
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Patrice Chotard <patrice.chotard@foss.st.com>
> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
> ---
>  arch/arm/mach-stm32mp/spl.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-stm32mp/spl.c b/arch/arm/mach-stm32mp/spl.c
> index 405eff68a3b..51fe0698fab 100644
> --- a/arch/arm/mach-stm32mp/spl.c
> +++ b/arch/arm/mach-stm32mp/spl.c
> @@ -43,7 +43,7 @@ u32 spl_boot_device(void)
>  	case BOOT_SERIAL_UART_8:
>  		return BOOT_DEVICE_UART;
>  	case BOOT_SERIAL_USB_OTG:
> -		return BOOT_DEVICE_USB;
> +		return BOOT_DEVICE_DFU;
>  	case BOOT_FLASH_NAND_FMC:
>  		return BOOT_DEVICE_NAND;
>  	case BOOT_FLASH_NOR_QSPI:

Applied to u-boot-stm/master

Thanks
Patrice