From: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3] MX: Set a common gpio.h for all i.MX
Date: Sun, 19 Aug 2012 15:30:57 +0200 (CEST) [thread overview]
Message-ID: <90786434.2553581.1345383057526.JavaMail.root@advansee.com> (raw)
In-Reply-To: <1345367461-24894-1-git-send-email-sbabic@denx.de>
Hi Stefano,
Your detailed description from v1 is gone.
> Signed-off-by: Stefano Babic <sbabic@denx.de>
Your Cc's from v1 are gone.
> ---
> Changes in v2:
> - please ignore this version, it is broken
>
> Changes in v3:
> - call the macro IMX_GPIO_NR as in kernel (Fabio Estevam)
> - change psr in gpio_psr (Benoit Thebaudeau)
> - drop MXC_GPIO_PORT_TO_NUM and use common macro (Benoit Thebaudeau)
>
> arch/arm/include/asm/arch-mx25/gpio.h | 17 +----------
> arch/arm/include/asm/arch-mx31/gpio.h | 7 +----
> arch/arm/include/asm/arch-mx35/gpio.h | 12 +-------
> arch/arm/include/asm/arch-mx5/gpio.h | 7 +----
> arch/arm/include/asm/arch-mx6/gpio.h | 7 +----
> arch/arm/include/asm/arch-mx6/imx-regs.h | 2 --
> arch/arm/include/asm/imx-common/gpio.h | 39
> +++++++++++++++++++++++++
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 28
> +++++++++---------
> board/karo/tx25/tx25.c | 10 +++----
> board/syteco/zmx25/zmx25.c | 26
> ++++++++---------
> include/configs/mx6qsabrelite.h | 3 +-
> 11 files changed, 78 insertions(+), 80 deletions(-)
> create mode 100644 arch/arm/include/asm/imx-common/gpio.h
>
> diff --git a/arch/arm/include/asm/arch-mx25/gpio.h
> b/arch/arm/include/asm/arch-mx25/gpio.h
> index dc6edc7..61c0b0d 100644
> --- a/arch/arm/include/asm/arch-mx25/gpio.h
> +++ b/arch/arm/include/asm/arch-mx25/gpio.h
> @@ -25,21 +25,6 @@
> #ifndef __ASM_ARCH_MX25_GPIO_H
> #define __ASM_ARCH_MX25_GPIO_H
>
> -/* Converts a GPIO port number and the internal bit position
> - * to the GPIO number
> - */
> -#define MXC_GPIO_PORT_TO_NUM(port, bit) (((port - 1) << 5) + (bit &
> 0x1f))
> -
> -/* GPIO registers */
> -struct gpio_regs {
> - u32 gpio_dr; /* data */
> - u32 gpio_dir; /* direction */
> - u32 psr; /* pad satus */
> - u32 icr1; /* interrupt config 1 */
> - u32 icr2; /* interrupt config 2 */
> - u32 imr; /* interrupt mask */
> - u32 isr; /* interrupt status */
> - u32 edge_sel; /* edge select */
> -};
> +#include <asm/imx-common/gpio.h>
>
> #endif
> diff --git a/arch/arm/include/asm/arch-mx31/gpio.h
> b/arch/arm/include/asm/arch-mx31/gpio.h
> index 95b73bf..55c0afa 100644
> --- a/arch/arm/include/asm/arch-mx31/gpio.h
> +++ b/arch/arm/include/asm/arch-mx31/gpio.h
> @@ -25,11 +25,6 @@
> #ifndef __ASM_ARCH_MX31_GPIO_H
> #define __ASM_ARCH_MX31_GPIO_H
>
> -/* GPIO Registers */
> -struct gpio_regs {
> - u32 gpio_dr;
> - u32 gpio_dir;
> - u32 gpio_psr;
> -};
> +#include <asm/imx-common/gpio.h>
>
> #endif
> diff --git a/arch/arm/include/asm/arch-mx35/gpio.h
> b/arch/arm/include/asm/arch-mx35/gpio.h
> index 7bcc3e8..1deb292 100644
> --- a/arch/arm/include/asm/arch-mx35/gpio.h
> +++ b/arch/arm/include/asm/arch-mx35/gpio.h
> @@ -25,16 +25,6 @@
> #ifndef __ASM_ARCH_MX35_GPIO_H
> #define __ASM_ARCH_MX35_GPIO_H
>
> -/* GPIO registers */
> -struct gpio_regs {
> - u32 gpio_dr; /* data */
> - u32 gpio_dir; /* direction */
> - u32 psr; /* pad satus */
> - u32 icr1; /* interrupt config 1 */
> - u32 icr2; /* interrupt config 2 */
> - u32 imr; /* interrupt mask */
> - u32 isr; /* interrupt status */
> - u32 edge_sel; /* edge select */
> -};
> +#include <asm/imx-common/gpio.h>
>
> #endif
> diff --git a/arch/arm/include/asm/arch-mx5/gpio.h
> b/arch/arm/include/asm/arch-mx5/gpio.h
> index 1dc34e9..b1b1218 100644
> --- a/arch/arm/include/asm/arch-mx5/gpio.h
> +++ b/arch/arm/include/asm/arch-mx5/gpio.h
> @@ -25,11 +25,6 @@
> #ifndef __ASM_ARCH_MX5_GPIO_H
> #define __ASM_ARCH_MX5_GPIO_H
>
> -/* GPIO registers */
> -struct gpio_regs {
> - u32 gpio_dr;
> - u32 gpio_dir;
> - u32 gpio_psr;
> -};
> +#include <asm/imx-common/gpio.h>
>
> #endif
> diff --git a/arch/arm/include/asm/arch-mx6/gpio.h
> b/arch/arm/include/asm/arch-mx6/gpio.h
> index 20c4e57..24c10f8 100644
> --- a/arch/arm/include/asm/arch-mx6/gpio.h
> +++ b/arch/arm/include/asm/arch-mx6/gpio.h
> @@ -25,11 +25,6 @@
> #ifndef __ASM_ARCH_MX6_GPIO_H
> #define __ASM_ARCH_MX6_GPIO_H
>
> -/* GPIO registers */
> -struct gpio_regs {
> - u32 gpio_dr;
> - u32 gpio_dir;
> - u32 gpio_psr;
> -};
> +#include <asm/imx-common/gpio.h>
>
> #endif /* __ASM_ARCH_MX6_GPIO_H */
> diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h
> b/arch/arm/include/asm/arch-mx6/imx-regs.h
> index 5d77603..f3e58b5 100644
> --- a/arch/arm/include/asm/arch-mx6/imx-regs.h
> +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
> @@ -172,8 +172,6 @@
> #define IMX_IIM_BASE OCOTP_BASE_ADDR
> #define FEC_QUIRK_ENET_MAC
>
> -#define GPIO_NUMBER(port, index) ((((port)-1)*32)+((index)&31))
> -
> #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
> #include <asm/types.h>
>
> diff --git a/arch/arm/include/asm/imx-common/gpio.h
> b/arch/arm/include/asm/imx-common/gpio.h
> new file mode 100644
> index 0000000..65226d9
> --- /dev/null
> +++ b/arch/arm/include/asm/imx-common/gpio.h
> @@ -0,0 +1,39 @@
> +/*
> + * Copyright (C) 2011
> + * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +
> +#ifndef __ASM_ARCH_IMX_GPIO_H
> +#define __ASM_ARCH_IMX_GPIO_H
> +
> +#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
> +/* GPIO registers */
> +struct gpio_regs {
> + u32 gpio_dr; /* data */
> + u32 gpio_dir; /* direction */
> + u32 gpio_psr; /* pad satus */
> +};
> +#endif
> +
> +#define IMX_GPIO_NR(port, index) ((((port)-1)*32)+((index)&31))
> +
> +#endif
> diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
> b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
> index 01e5083..72f4294 100644
> --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
> +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
> @@ -85,12 +85,12 @@ struct i2c_pads_info i2c_pad_info0 = {
> .scl = {
> .i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC,
> .gpio_mode = MX6Q_PAD_EIM_D21__GPIO_3_21 | PC,
> - .gp = GPIO_NUMBER(3, 21)
> + .gp = IMX_GPIO_NR(3, 21)
> },
> .sda = {
> .i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC,
> .gpio_mode = MX6Q_PAD_EIM_D28__GPIO_3_28 | PC,
> - .gp = GPIO_NUMBER(3, 28)
> + .gp = IMX_GPIO_NR(3, 28)
> }
> };
>
> @@ -99,12 +99,12 @@ struct i2c_pads_info i2c_pad_info1 = {
> .scl = {
> .i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC,
> .gpio_mode = MX6Q_PAD_KEY_COL3__GPIO_4_12 | PC,
> - .gp = GPIO_NUMBER(4, 12)
> + .gp = IMX_GPIO_NR(4, 12)
> },
> .sda = {
> .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC,
> .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO_4_13 | PC,
> - .gp = GPIO_NUMBER(4, 13)
> + .gp = IMX_GPIO_NR(4, 13)
> }
> };
>
> @@ -113,12 +113,12 @@ struct i2c_pads_info i2c_pad_info2 = {
> .scl = {
> .i2c_mode = MX6Q_PAD_GPIO_5__I2C3_SCL | PC,
> .gpio_mode = MX6Q_PAD_GPIO_5__GPIO_1_5 | PC,
> - .gp = GPIO_NUMBER(1, 5)
> + .gp = IMX_GPIO_NR(1, 5)
> },
> .sda = {
> .i2c_mode = MX6Q_PAD_GPIO_16__I2C3_SDA | PC,
> .gpio_mode = MX6Q_PAD_GPIO_16__GPIO_7_11 | PC,
> - .gp = GPIO_NUMBER(7, 11)
> + .gp = IMX_GPIO_NR(7, 11)
> }
> };
>
> @@ -227,9 +227,9 @@ int board_ehci_hcd_init(int port)
> imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
>
> /* Reset USB hub */
> - gpio_direction_output(GPIO_NUMBER(7, 12), 0);
> + gpio_direction_output(IMX_GPIO_NR(7, 12), 0);
> mdelay(2);
> - gpio_set_value(GPIO_NUMBER(7, 12), 1);
> + gpio_set_value(IMX_GPIO_NR(7, 12), 1);
>
> return 0;
> }
> @@ -411,12 +411,12 @@ struct button_key {
> };
>
> static struct button_key const buttons[] = {
> - {"back", GPIO_NUMBER(2, 2), 'B'},
> - {"home", GPIO_NUMBER(2, 4), 'H'},
> - {"menu", GPIO_NUMBER(2, 1), 'M'},
> - {"search", GPIO_NUMBER(2, 3), 'S'},
> - {"volup", GPIO_NUMBER(7, 13), 'V'},
> - {"voldown", GPIO_NUMBER(4, 5), 'v'},
> + {"back", IMX_GPIO_NR(2, 2), 'B'},
> + {"home", IMX_GPIO_NR(2, 4), 'H'},
> + {"menu", IMX_GPIO_NR(2, 1), 'M'},
> + {"search", IMX_GPIO_NR(2, 3), 'S'},
> + {"volup", IMX_GPIO_NR(7, 13), 'V'},
> + {"voldown", IMX_GPIO_NR(4, 5), 'v'},
> };
>
> /*
> diff --git a/board/karo/tx25/tx25.c b/board/karo/tx25/tx25.c
> index 07fd98d..0fd41c7 100644
> --- a/board/karo/tx25/tx25.c
> +++ b/board/karo/tx25/tx25.c
> @@ -34,8 +34,8 @@
> DECLARE_GLOBAL_DATA_PTR;
>
> #ifdef CONFIG_FEC_MXC
> -#define GPIO_FEC_RESET_B MXC_GPIO_PORT_TO_NUM(4, 7)
> -#define GPIO_FEC_ENABLE_B MXC_GPIO_PORT_TO_NUM(4, 9)
> +#define GPIO_FEC_RESET_B IMX_GPIO_NR(4, 7)
> +#define GPIO_FEC_ENABLE_B IMX_GPIO_NR(4, 9)
> void tx25_fec_init(void)
> {
> struct iomuxc_mux_ctl *muxctl;
> @@ -103,9 +103,9 @@ void tx25_fec_init(void)
> /*
> * set each to 1 and make each an output
> */
> - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 10), 1);
> - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 11), 1);
> - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 12), 1);
> + gpio_direction_output(IMX_GPIO_NR(3, 10), 1);
> + gpio_direction_output(IMX_GPIO_NR(3, 11), 1);
> + gpio_direction_output(IMX_GPIO_NR(3, 12), 1);
>
> mdelay(22); /* this value came from RedBoot */
>
> diff --git a/board/syteco/zmx25/zmx25.c b/board/syteco/zmx25/zmx25.c
> index c56b195..fe5589d 100644
> --- a/board/syteco/zmx25/zmx25.c
> +++ b/board/syteco/zmx25/zmx25.c
> @@ -56,7 +56,7 @@ int board_init()
>
> /* Setup of core volatage selection pin to run at 1.4V */
> writel(gpio_mux_mode5, &muxctl->pad_ext_armclk); /* VCORE GPIO3[15]
> */
> - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 15), 1);
> + gpio_direction_output(IMX_GPIO_NR(3, 15), 1);
>
> /* Setup of input daisy chains for SD card pins*/
> writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_cmd);
> @@ -68,10 +68,10 @@ int board_init()
>
> /* Setup of digital output for USB power and OC */
> writel(gpio_mux_mode5, &muxctl->pad_csi_d3); /* USB Power GPIO1[28]
> */
> - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 28), 1);
> + gpio_direction_output(IMX_GPIO_NR(1, 28), 1);
>
> writel(gpio_mux_mode5, &muxctl->pad_csi_d2); /* USB OC GPIO1[27] */
> - gpio_direction_input(MXC_GPIO_PORT_TO_NUM(1, 18));
> + gpio_direction_input(IMX_GPIO_NR(1, 18));
>
> /* Setup of digital output control pins */
> writel(gpio_mux_mode5, &muxctl->pad_csi_d8); /* Ouput 1 Ctrl
> GPIO1[7] */
> @@ -83,21 +83,21 @@ int board_init()
> writel(0, &padctl->pad_csi_d5); /* Ouput 2 Stat pull up off */
>
> /* Switch both output drivers off */
> - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 7), 0);
> - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 6), 0);
> + gpio_direction_output(IMX_GPIO_NR(1, 7), 0);
> + gpio_direction_output(IMX_GPIO_NR(1, 6), 0);
>
> /* Setup of key input pin GPIO2[29]*/
> writel(gpio_mux_mode5 | MX25_PIN_MUX_SION, &muxctl->pad_kpp_row0);
> writel(0, &padctl->pad_kpp_row0); /* Key pull up off */
> - gpio_direction_input(MXC_GPIO_PORT_TO_NUM(2, 29));
> + gpio_direction_input(IMX_GPIO_NR(2, 29));
>
> /* Setup of status LED outputs */
> writel(gpio_mux_mode5, &muxctl->pad_csi_d9); /* GPIO4[21] */
> writel(gpio_mux_mode5, &muxctl->pad_csi_d4); /* GPIO1[29] */
>
> /* Switch both LEDs off */
> - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(4, 21), 0);
> - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 29), 0);
> + gpio_direction_output(IMX_GPIO_NR(4, 21), 0);
> + gpio_direction_output(IMX_GPIO_NR(1, 29), 0);
>
> /* Setup of CAN1 and CAN2 signals */
> writel(gpio_mux_mode6, &muxctl->pad_gpio_a); /* CAN1 TX */
> @@ -148,12 +148,12 @@ int board_late_init(void)
> writel(gpio_mux_mode2, &muxctl->pad_uart2_cts);
>
> /* assert PHY reset (low) */
> - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 16), 0);
> + gpio_direction_output(IMX_GPIO_NR(3, 16), 0);
>
> udelay(5000);
>
> /* deassert PHY reset */
> - gpio_set_value(MXC_GPIO_PORT_TO_NUM(3, 16), 1);
> + gpio_set_value(IMX_GPIO_NR(3, 16), 1);
>
> udelay(5000);
> #endif
> @@ -161,12 +161,12 @@ int board_late_init(void)
> e = getenv("gs_base_board");
> if (e != NULL) {
> if (strcmp(e, "G283") == 0) {
> - int key = gpio_get_value(MXC_GPIO_PORT_TO_NUM(2, 29));
> + int key = gpio_get_value(IMX_GPIO_NR(2, 29));
>
> if (key) {
> /* Switch on both LEDs to inidcate boot mode */
> - gpio_set_value(MXC_GPIO_PORT_TO_NUM(1, 29), 0);
> - gpio_set_value(MXC_GPIO_PORT_TO_NUM(4, 21), 0);
> + gpio_set_value(IMX_GPIO_NR(1, 29), 0);
> + gpio_set_value(IMX_GPIO_NR(4, 21), 0);
>
> setenv("preboot", "run gs_slow_boot");
> } else
> diff --git a/include/configs/mx6qsabrelite.h
> b/include/configs/mx6qsabrelite.h
> index 0d376ba..0c7a8c0 100644
> --- a/include/configs/mx6qsabrelite.h
> +++ b/include/configs/mx6qsabrelite.h
> @@ -31,6 +31,7 @@
> #define CONFIG_MACH_TYPE 3769
>
> #include <asm/arch/imx-regs.h>
> +#include <asm/imx-common/gpio.h>
>
> #define CONFIG_CMDLINE_TAG
> #define CONFIG_SETUP_MEMORY_TAGS
> @@ -53,7 +54,7 @@
> #define CONFIG_SPI_FLASH_SST
> #define CONFIG_MXC_SPI
> #define CONFIG_SF_DEFAULT_BUS 0
> -#define CONFIG_SF_DEFAULT_CS (0|(GPIO_NUMBER(3, 19)<<8))
> +#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 19)<<8))
> #define CONFIG_SF_DEFAULT_SPEED 25000000
> #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
> #endif
> --
> 1.7.9.5
>
>
Apart from the patch header, I'm fine with this version.
Best regards,
Beno?t
next prev parent reply other threads:[~2012-08-19 13:30 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-18 15:26 [U-Boot] [PATCH] MX: Set a common gpio.h for all i.MX Stefano Babic
2012-08-18 19:25 ` Benoît Thébaudeau
2012-08-18 20:55 ` Matt Sealey
2012-08-18 22:01 ` Marek Vasut
2012-08-18 22:13 ` stefano babic
2012-08-19 0:25 ` Benoît Thébaudeau
2012-08-19 8:35 ` Stefano Babic
2012-08-18 22:59 ` Fabio Estevam
2012-08-18 23:01 ` Marek Vasut
2012-08-19 7:46 ` stefano babic
2012-08-19 8:40 ` [U-Boot] [PATCH v2] " Stefano Babic
2012-08-19 9:11 ` [U-Boot] [PATCH v3] " Stefano Babic
2012-08-19 13:30 ` Benoît Thébaudeau [this message]
2012-08-19 16:41 ` stefano babic
2012-08-20 7:33 ` [U-Boot] [PATCH v4] " Stefano Babic
2012-08-20 20:33 ` Benoît Thébaudeau
2012-08-20 21:20 ` Matt Sealey
2012-08-21 6:12 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=90786434.2553581.1345383057526.JavaMail.root@advansee.com \
--to=benoit.thebaudeau@advansee.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox