From mboxrd@z Thu Jan  1 00:00:00 1970
From: Major A <andras.g.major@gmail.com>
Date: Thu, 30 Apr 2020 13:10:43 +0200
Subject: ZynqMP boot: no messages from SPL other than "Debug uart enabled"
In-Reply-To: <47699640-e89a-585a-59b0-1d4f1d00ae8d@xilinx.com>
References: <f5d7cb93-4917-75f8-e736-d11ac8e284da@gmail.com>
 <01046131-277a-2dd9-61a8-927cd151b3f6@gmail.com>
 <63125ad2-d203-bbdb-98fc-342edd9c2ebe@xilinx.com>
 <9b736ca5-f65c-f901-84a0-7a7505476c95@gmail.com>
 <9d0dff6b-7905-4bdd-2f3c-6c91a33c59d7@xilinx.com>
 <584d3902-f6d2-d332-d3de-b7eb949993e2@gmail.com>
 <0bcc53ed-3244-cd6a-87ed-a9c7f8a6c884@xilinx.com>
 <601793dd-55af-fde4-0211-0bd475c3ba9a@gmail.com>
 <32cd61a0-7149-6af1-fac8-7da10c3558fa@xilinx.com>
 <a98ae892-7ab6-6c60-a716-52a3e86af2f5@gmail.com>
 <06f7e484-71b5-c374-3636-c62ef730738f@xilinx.com>
 <1309ea4e-697d-d9f9-a921-ab8a6a9f4965@gmail.com>
 <33d0c9cf-6d9f-a251-2313-0747ff9d6644@xilinx.com>
 <2fd8cf69-9ca4-6126-2bd2-ba1d7987a54e@gmail.com>
 <3ab17480-431a-e0e3-c2af-e1639a2d07a6@xilinx.com>
 <6b4c296f-fb91-fd84-f5c8-7b4f542034e4@gmail.com>
 <4f8b4b6a-c97d-38b8-5a74-98bbc916cb3a@xilinx.com>
 <8a62851c-3323-2a73-6d90-d8fa7c8e4e6f@gmail.com>
 <47699640-e89a-585a-59b0-1d4f1d00ae8d@xilinx.com>
Message-ID: <90804b25-0bd5-2124-7c80-e045d03576c5@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Michal,

Yes, I did.  The Petalinux image from here:

 
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18841937/Zynq+UltraScale+MPSoC+Ubuntu+part+2+-+Building+and+Running+the+Ubuntu+Desktop+From+Sources

works fine.

Cheers,

   Andr?s


On 30/04/2020 13:03, Michal Simek wrote:
> hi,
> 
> that's quite weird. Did you try any petalinux bsp and boot petalinux
> boot.bin on that board to make sure that board is fine?
> 
> M
> 
> On 30. 04. 20 13:01, Major A wrote:
>> Hi Michal,
>>
>> Sorry I misunderstood your message, and I didn't spot the attached
>> files.? Now I booted with those two files, there's no output on the
>> UARTs whatsoever.? Is there anything else I can try?
>>
>> Cheers,
>>
>>  ? Andr?s
>>
>>
>> On 30/04/2020 12:33, Michal Simek wrote:
>>> Hi,
>>>
>>> On 30. 04. 20 12:19, Major A wrote:
>>>> Hi Michal,
>>>>
>>>>> can you please try these files in SD boot mode?
>>>>
>>>> Done, here are two logs, both in SD boot mode.
>>>>
>>>> First, log.sd is with SD card inserted (with the image files that
>>>> apparently refuse to work other than the early UART message).
>>>>
>>>> The other file, log.no-sd, is with no card inserted.
>>>
>>> we don't understand each other. I sent you boot.bin and image.itb. Just
>>> copy them to SD card, switch board to sd boot mode and power it up.
>>>
>>> Thanks,
>>> Michal
>>>
>