[U-Boot] [PATCH 1/1] fsl_qspi: Pet the watchdog while reading/writing

[Alexander Stein <alexander.stein@systec-electronic.com>]

Hi Fabio,

On Friday 04 December 2015 18:54:15, Fabio Estevam wrote:
> On Wed, Nov 4, 2015 at 6:19 AM, Alexander Stein
> <alexander.stein@systec-electronic.com> wrote:
> > When reading a large blob. e.g. a linux kernel (several MiBs) a watchdog
> > timeout might occur meanwhile. So pet the watchdog while operating on
> > the flash.
> 
> I guess the same problem would occur when you do long file transfers
> via TFTP, via USB, via eMMC, right?

I didn't notice this problem with TFTP which takes ~3s. I don't have the opportunity to use USB oder eMMC on this hardware.

> Shouldn't you fix the watchdog timeout value instead? If I read this
> thread correctly you set the watchdog timeout to be 1.5 s, which seems
> to be too low.

You might be right, but there absolutely no way to change that timeout. It's _fixed_ in hardware. If you can't serve it, you got reset. It's that simple, no matter what.

Best regards,
Alexander
-- 
Dipl.-Inf. Alexander Stein
SYS TEC electronic GmbH
alexander.stein at systec-electronic.com

Legal and Commercial Address:
Am Windrad 2
08468 Heinsdorfergrund
Germany

Office: +49 (0) 3765 38600-0
Fax:    +49 (0) 3765 38600-4100
 
Managing Directors:
	Director Technology/CEO: Dipl.-Phys. Siegmar Schmidt;
	Director Commercial Affairs/COO: Dipl. Ing. (FH) Armin von Collrepp
Commercial Registry:
	Amtsgericht Chemnitz, HRB 28082; USt.-Id Nr. DE150534010