From: Sean Edmond <seanedmond@linux.microsoft.com>
To: "Lothar Waßmann" <LW@KARO-electronics.de>
Cc: u-boot@lists.denx.de, joe.hershberger@ni.com, rfried.dev@gmail.com
Subject: Re: [PATCH 2/3] net: bootp: BOOTP/DHCPv4 retransmission improvements
Date: Tue, 3 Oct 2023 11:15:26 -0700 [thread overview]
Message-ID: <941b2fd4-77d0-109a-53ad-dd51f6250ddb@linux.microsoft.com> (raw)
In-Reply-To: <20230927061125.3f1702a0@karo-electronics.de>
On 2023-09-26 9:11 p.m., Lothar Waßmann wrote:
> Hi,
>
> On Mon, 25 Sep 2023 13:29:34 -0700 seanedmond@linux.microsoft.com wrote:
>> From: Sean Edmond <seanedmond@microsoft.com>
>>
>> This patch introduces 3 improvements to align with RFC 951:
>> - retransmission backoff interval maximum is configurable
>> - initial retranmission backoff interval is configurable
>> - transaction ID is kept the same for each BOOTP/DHCPv4 request
>>
>> In applications where thousands of nodes are serviced by a single DHCP
>> server, maximizing the retransmission backoff interval at 2 seconds (the
>> current u-boot default) exerts high pressure on the DHCP server and
>> network layer.
>>
>> RFC 951 “7.2. Client Retransmission Strategy” states that the
>> retransmission backoff interval should maximize at 60 seconds. This
>> patch allows the interval to be configurable using the environment
>> variable "bootpretransmitperiodmax"
>>
>> The initial retranmission backoff period defaults to 250ms, which is
>> also too small for these scenarios with many clients. This patch makes
>> the initial retransmission interval to be configurable using the
>> environment variable "bootpretransmitperiodinit".
>>
>> Also, on a retransmission it is not expected for the transaction ID to
>> change (only the 'secs' field should be updated). Let's save the
>> transaction ID and use the same transaction ID for each BOOTP/DHCPv4
>> exchange.
>>
>> Signed-off-by: Sean Edmond <seanedmond@microsoft.com>
>> ---
>> net/bootp.c | 63 +++++++++++++++++++++++++++++++++++++++--------------
>> 1 file changed, 47 insertions(+), 16 deletions(-)
>>
>> diff --git a/net/bootp.c b/net/bootp.c
>> index 013d54c7ed..7248536cc4 100644
>> --- a/net/bootp.c
>> +++ b/net/bootp.c
>> @@ -42,6 +42,17 @@
>> */
>> #define TIMEOUT_MS ((3 + (CONFIG_NET_RETRY_COUNT * 5)) * 1000)
>>
>> +/*
>> + * According to rfc951 : 7.2. Client Retransmission Strategy
>> + * "After the 'average' backoff reaches about 60 seconds, it should be
>> + * increased no further, but still randomized."
>> + *
>> + * U-Boot has saturated this backoff at 2 seconds for a long time.
>> + * To modify, set the environment variable "bootpretransmitperiodmax"
>> + */
>> +#define RETRANSMIT_PERIOD_MAX_MS 2000
>> +#define RETRANSMIT_PERIOD_INIT_MS 250
>> +
>> #define PORT_BOOTPS 67 /* BOOTP server UDP port */
>> #define PORT_BOOTPC 68 /* BOOTP client UDP port */
>>
>> @@ -56,6 +67,7 @@
>> u32 bootp_ids[CFG_BOOTP_ID_CACHE_SIZE];
>> unsigned int bootp_num_ids;
>> int bootp_try;
>> +u32 bootp_id;
>> ulong bootp_start;
>> ulong bootp_timeout;
>> char net_nis_domain[32] = {0,}; /* Our NIS domain */
>> @@ -63,6 +75,7 @@ char net_hostname[32] = {0,}; /* Our hostname */
>> char net_root_path[CONFIG_BOOTP_MAX_ROOT_PATH_LEN] = {0,}; /* Our bootpath */
>>
>> static ulong time_taken_max;
>> +static u32 retransmit_period_max_ms;
>>
>> #if defined(CONFIG_CMD_DHCP)
>> static dhcp_state_t dhcp_state = INIT;
>> @@ -417,8 +430,8 @@ static void bootp_timeout_handler(void)
>> }
>> } else {
>> bootp_timeout *= 2;
>> - if (bootp_timeout > 2000)
>> - bootp_timeout = 2000;
>> + if (bootp_timeout > retransmit_period_max_ms)
>> + bootp_timeout = retransmit_period_max_ms;
>> net_set_timeout_handler(bootp_timeout, bootp_timeout_handler);
>> bootp_request();
>> }
>> @@ -714,10 +727,18 @@ static int bootp_extended(u8 *e)
>>
>> void bootp_reset(void)
>> {
>> + char *ep; /* Environment pointer */
>> +
>> bootp_num_ids = 0;
>> bootp_try = 0;
>> bootp_start = get_timer(0);
>> - bootp_timeout = 250;
>> +
>> + ep = env_get("bootpretransmitperiodinit");
>> + if (ep)
>> + bootp_timeout = dectoul(ep, NULL);
>> + else
>> + bootp_timeout = RETRANSMIT_PERIOD_INIT_MS;
>> +
> bootp_timeout = env_get_ulong("bootpretransmitperiodinit", 0, RETRANSMIT_PERIOD_INIT_MS);
> does the same...
Thanks for the suggestion, will fix in v2.
>> }
>>
>> void bootp_request(void)
>> @@ -729,7 +750,6 @@ void bootp_request(void)
>> #ifdef CONFIG_BOOTP_RANDOM_DELAY
>> ulong rand_ms;
>> #endif
>> - u32 bootp_id;
>> struct in_addr zero_ip;
>> struct in_addr bcast_ip;
>> char *ep; /* Environment pointer */
>> @@ -745,6 +765,12 @@ void bootp_request(void)
>> else
>> time_taken_max = TIMEOUT_MS;
>>
>> + ep = env_get("bootpretransmitperiodmax");
>> + if (ep)
>> + retransmit_period_max_ms = dectoul(ep, NULL);
>> + else
>> + retransmit_period_max_ms = RETRANSMIT_PERIOD_MAX_MS;
>> +
> see above
>
>
> Lothar Waßmann
next prev parent reply other threads:[~2023-10-03 18:15 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-25 20:29 [PATCH 0/3] BOOTP/DHCPv4 enhancements seanedmond
2023-09-25 20:29 ` [PATCH 1/3] net: Get pxe config file from dhcp option 209 seanedmond
2023-09-25 20:29 ` [PATCH 2/3] net: bootp: BOOTP/DHCPv4 retransmission improvements seanedmond
2023-09-27 4:11 ` Lothar Waßmann
2023-10-03 18:15 ` Sean Edmond [this message]
2023-09-25 20:29 ` [PATCH 3/3] net: bootp: add config option BOOTP_RANDOM_XID seanedmond
2023-09-26 16:45 ` [PATCH 0/3] BOOTP/DHCPv4 enhancements Peter Robinson
2023-10-03 18:14 ` Sean Edmond
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=941b2fd4-77d0-109a-53ad-dd51f6250ddb@linux.microsoft.com \
--to=seanedmond@linux.microsoft.com \
--cc=LW@KARO-electronics.de \
--cc=joe.hershberger@ni.com \
--cc=rfried.dev@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox