[U-Boot-Users] new to uboot

[U-Boot-Users] new to uboot

[shah009]

Hi,
I have started working on kb9202 eval board.
I am relatively new to uboot.
please suggest me some links where i can learn more about uboot in detail...
thanks
shah
-- 
View this message in context: http://www.nabble.com/new-to-uboot-tf3410126.html#a9500677
Sent from the Uboot - Users mailing list archive at Nabble.com.

[U-Boot-Users] new to uboot

[Jerry Van Baren]

shah009 wrote:
> Hi,
> I have started working on kb9202 eval board.
> I am relatively new to uboot.
> please suggest me some links where i can learn more about uboot in detail...
> thanks
> shah

<http://www.denx.de/wiki/UBoot/Documentation>
<http://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=blob_plain;f=README;hb=HEAD>
<http://www.denx.de/wiki/UBoot/WebHome>
<http://www.denx.de/wiki/DULG/WebHome>

...and if you need a cross compiler:
<http://www.denx.de/wiki/view/DULG/ELDK>

HTH,
gvb

[U-Boot-Users] New to Uboot

[swapnil borgaonkar]

Hi,

I'm new to Uboot... Where do i Get started.

I want to port Uboot to a custom S3C2412 module. ( 32MB Nand Flash + 64 MB
SDram )
I can compile for ARM.

Regards,
Swapnil
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070227/57911bf5/attachment.htm 

[U-Boot-Users] New to Uboot

[Grant Likely]

On 2/26/07, swapnil borgaonkar <swapnilborg@gmail.com> wrote:
> Hi,
>
> I'm new to Uboot... Where do i Get started.

Start by reading the manual and the README file:
http://www.denx.de/wiki/view/DULG/UBoot
The README file is in the u-boot source tree.

It's easiest if you can get a hold on an eval board that is already
supported by u-boot.  I recommend playing around with it on a
supported board before attempting to port it.

Then, when you have specific questions, post them here to the list.
Providing lots of detail helps.

g.

-- 
Grant Likely, B.Sc. P.Eng.
Secret Lab Technologies Ltd.
grant.likely at secretlab.ca
(403) 399-0195