From mboxrd@z Thu Jan  1 00:00:00 1970
From: Bradley Remedios <bremedios@gmail.com>
Date: Fri, 18 Feb 2005 13:45:20 -0800
Subject: [U-Boot-Users] IBM/AMCC 440EP ethernet question
In-Reply-To: <14370726.1108733484215.JavaMail.root@beaker.psp.pas.earthlink.net>
References: <14370726.1108733484215.JavaMail.root@beaker.psp.pas.earthlink.net>
Message-ID: <963b338705021813455414ca37@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Fri, 18 Feb 2005 05:31:23 -0800 (GMT-08:00), Miles Gazic
<mgazic@earthlink.net> wrote:
> Do you happen to know what PHY you are using?  Our Broadcom AC101L can do
> both RMII and MII, the hardware guy thinks all he might have to do is pop in a
> 50MHz crystal instead of the 25MHz one we have now.

Before you do any major changes you may want to take a look at what
the SDR0_MFR register is set to on your board.  It also has a portion
that makes note of the ZMII mode.  I was just looking at some stuff
trying to pin-point my problem when I noticed that.

Regards.
-- 
Bradley Remedios
bremedios at gmail.com