* [U-Boot-Users] autoscript and bootm problem at NIOS
@ 2005-08-29 18:30 Maciej Witaszek
0 siblings, 0 replies; only message in thread
From: Maciej Witaszek @ 2005-08-29 18:30 UTC (permalink / raw)
To: u-boot
Hi,
I use board DK20K200E with NIOS, 64MB SDRAM module and
CS8900. U-boot was get today (29-08-2005) from CVS.
I create gziped standalone images of kernel (2.4) and romfs.
I use autoscript to load it from tftp server.
The script is put on tftp server and downloaded
after obtained ip address by dhcp.
The script correctly downloads both images and put in right place in
memory. "iminfo" shows that CRC is correct for both images.
But "bootm" show an error -4 Z_MEM_ERROR() in inflate() function.
I set "unc_len" to 0x800000. It's enough for kernel and romfs.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-08-29 18:30 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-08-29 18:30 [U-Boot-Users] autoscript and bootm problem at NIOS Maciej Witaszek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox