From: flobe01 at arcor.de <flobe01@arcor.de>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] U-Boot 1.1.3 does not boot with MPC8349E
Date: Mon, 10 Oct 2005 18:15:48 +0200 (CEST) [thread overview]
Message-ID: <9730895.1128960948159.JavaMail.ngmail@webmail-07.arcor-online.net> (raw)
Has anybody tried to bring up U-Boot 1.1.3 together with a (Power Quicc II Pro) MPC8349E MDS Processor Board (silicon rev 1.0)? The board comes with a (probably patched) 1.1.2 version installed. I want to update it to 1.1.3 in order to be able to use a current Linux kernel (2.6.13 - U-Boot 1.1.2 seems to be incompatible due to differences in the bd_info structures, right?).
After building U-Boot and writing to the flash according to the README, the board does show no more signs of life (apart from the reset sequence leds) after hard reset.
I used crosstool 0.38 for building the tool chain with a standard ppc target (-mcpu=powerpc) and gcc 3.4.1.
Are there any board settings necessary other than those defaults in the Getting Started guide?
Thanks and regards,
Florian.
Machen Sie aus 14 Cent spielend bis zu 100 Euro!
Die neue Gaming-Area von Arcor - ?ber 50 Onlinespiele im Angebot.
http://www.arcor.de/rd/emf-gaming-1
next reply other threads:[~2005-10-10 16:15 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-10 16:15 flobe01 at arcor.de [this message]
2005-10-10 20:38 ` [U-Boot-Users] U-Boot 1.1.3 does not boot with MPC8349E Jeff Angielski
2005-10-10 21:00 ` Wolfgang Denk
2005-10-10 23:00 ` Kumar Gala
2005-10-11 2:09 ` Jeff Angielski
2005-10-19 7:00 ` Matthew McClintock
-- strict thread matches above, loose matches on Subject: below --
2005-10-19 7:12 Chu hanjin-r52514
2005-10-19 7:23 Florian Behrens
2005-10-19 7:30 Chu hanjin-r52514
2005-10-19 8:16 Florian Behrens
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9730895.1128960948159.JavaMail.ngmail@webmail-07.arcor-online.net \
--to=flobe01@arcor.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox