From mboxrd@z Thu Jan  1 00:00:00 1970
From: Daniel Ann <ktdann@gmail.com>
Date: Tue, 29 Mar 2005 20:31:06 +0900
Subject: [U-Boot-Users] Error compiling/linking
In-Reply-To: <20050329075928.A9A71C108D@atlas.denx.de>
References: <9b7ca65705032817584e803f61@mail.gmail.com>
	 <20050329075928.A9A71C108D@atlas.denx.de>
Message-ID: <9b7ca657050329033133e2f746@mail.gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Gotcha. I've done exactly what you said, and finally got it compiled.
But the way I've done it, is not really comforting if you know what I
mean.

After trying the compilation from the command line, I've found out the
powerpc-linux-objdump was okay. But had segmentation fault during
powerpc-linux-ld.
So, doing rather simple trial and error method, I've got it compiled
after removing line which reads "-Map u-boot.map".

So, here is my concern, what exactly have I removed ?

I've got a feeling I'm running around blind folded, so any tips and
hints on this would be much appreciated.

Also, if that line is causing the compilation error, where do you
think I should start looking ?

Thanks heaps.

On Tue, 29 Mar 2005 09:59:23 +0200, Wolfgang Denk <wd@denx.de> wrote:
> Dear Daniel,
> 
> in message <9b7ca65705032817584e803f61@mail.gmail.com> you wrote:
> > I'm trying to compile latest U-boot I downloaded from CVS using the
> > cross compiler I made using crosstool, but getting error without any
> > print outs that I can work with.
> 
> General rule: if you don't get any error messages  then  try  running
> the commands by hand onthe command line.
> 
> > UNDEF_SYM=`powerpc-linux-objdump -x lib_generic/libgeneric.a
> > board/a3000/liba3000.a cpu/mpc824x/libmpc824x.a lib_ppc/libppc.a
> > fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a
> > fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
> > net/libnet.a disk/libdisk.a rtc/librtc.a dtt/libdtt.a
> > drivers/libdrivers.a drivers/sk98lin/libsk98lin.a post/libpost.a
> > post/cpu/libcpu.a common/libcommon.a |sed  -n -e
> > 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
> >         powerpc-linux-ld -Bstatic -T
> > /tmp/u-boot-cvs/board/a3000/u-boot.lds -Ttext 0xFFF00000  -n
> > $UNDEF_SYM cpu/mpc824x/start.o \
> >                 --start-group lib_generic/libgeneric.a
> > board/a3000/liba3000.a cpu/mpc824x/libmpc824x.a lib_ppc/libppc.a
> > fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a
> > fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
> > net/libnet.a disk/libdisk.a rtc/librtc.a dtt/libdtt.a
> > drivers/libdrivers.a drivers/sk98lin/libsk98lin.a post/libpost.a
> > post/cpu/libcpu.a common/libcommon.a --end-group -L
> > /opt/crosstool/powerpc-linux/gcc-3.2.3-glibc-2.2.5/lib/gcc-lib/powerpc-linux/3.2.3/nof
> > -lgcc \
> >                 -Map u-boot.map -o u-boot
> > make: *** [u-boot] Error 139
> 
> > As you can see, no real helpful message here.
> > If only there was.. I could have solved it :)
> 
> Most probably either the  invocation  of  "powerpc-linux-objdump"  or
> that  of  "powerpc-linux-ld"  fail with a segmentation violation. Try
> running these commands step by step on the command line.
> 
> I bet there will be an error message from your shell.
> 
> Best regards,
> 
> Wolfgang Denk
> 
> --
> Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> He'd heard her use that sweet, innocent  tone  of  voice  before.  It
> meant that, pretty soon, there was going to be trouble.
>                                        - Terry Pratchett, _Truckers_
> 


-- 
Daniel