public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
 messages from 2008-10-07 16:35:31 to 2008-10-10 08:23:22 UTC [more...]

[U-Boot] [patch 0/2] Some more USB-OHCI bugfixes [V2]
 2008-10-10  8:23 UTC  (3+ messages)
` [U-Boot] [patch 1/2 V2] fix USB initialisation procedure
` [U-Boot] [patch 2/2] The PIPE_INTERRUPT flag is used wrong

[U-Boot] [PATCH 08/13 v3] ARM: OMAP3: Add NAND support
 2008-10-10  8:09 UTC  (5+ messages)

[U-Boot] [PATCH 1/4] ppc4xx: Update DU440 config
 2008-10-10  7:44 UTC  (14+ messages)
` [U-Boot] [PATCH 2/4] ppc4xx: Fix DU440 GPIO configuration
` [U-Boot] [PATCH 3/4] ppc4xx: Add strapping mode for 667MHz CPU frequency on DU440 board
  ` [U-Boot] [PATCH 4/4] ppc4xx: Fix USB 2.0 phy reset sequence

[U-Boot] Special memory test Question
 2008-10-10  7:40 UTC  (3+ messages)

[U-Boot] [PATCH] Introduce CONFIG_4xx_HAS_OPB
 2008-10-10  7:33 UTC  (2+ messages)

[U-Boot] [patch 0/2] Some more USB-OHCI bugfixes
 2008-10-10  7:30 UTC  (19+ messages)
` [U-Boot] [patch 1/2] fix USB initialisation procedure
` [U-Boot] [patch 2/2] The PIPE_INTERRUPT flag is used wrong

[U-Boot] [PATCH] 85xx: Using proper I2C source clock divider for MPC8544
 2008-10-10  7:29 UTC  (3+ messages)

[U-Boot] [PATCH 1/2] Make mpc8572ds, mpc8544ds, mpc8536ds relocatable
 2008-10-10  6:29 UTC  (3+ messages)
` [U-Boot] [PATCH 2/2] Leave x86emu op code tables in default section

[U-Boot] [PATCH 1/4] Make pixis_set_sgmii more general to support MPC85xx boards
 2008-10-10  3:41 UTC  (4+ messages)
` [U-Boot] [PATCH 2/4] Enabled the Freescale SGMII riser card on 8572DS
  ` [U-Boot] [PATCH 3/4] Enabled the Freescale SGMII riser card on 8536DS
    ` [U-Boot] [PATCH 4/4] Do not init SATA when disabled "

[U-Boot] Linux does not boot from flash, but will from RAM
 2008-10-10  0:46 UTC  (2+ messages)

[U-Boot] Problem with flash on a MPC5200B board
 2008-10-10  0:19 UTC  (4+ messages)

[U-Boot] U-Boot Relocation (all sections, not just .text)
 2008-10-09 22:07 UTC 

[U-Boot] [OFF TOPIC] Linux Physmap drivers
 2008-10-09 18:40 UTC  (2+ messages)

[U-Boot] Please pull u-boot-mpc85xx.git
 2008-10-09 18:26 UTC 

[U-Boot] [PATCH 13/13 v3] ARM: OMAP3: Add Overo board
 2008-10-09 17:57 UTC 

[U-Boot] [PATCH 12/13 v3] ARM: OMAP3: Add EVM board
 2008-10-09 17:57 UTC 

[U-Boot] [PATCH 11/13 v3] ARM: OMAP3: Add BeagleBoard
 2008-10-09 17:56 UTC 

[U-Boot] [PATCH 10/13 v3] ARM: OMAP3: Add I2C support
 2008-10-09 17:56 UTC 

[U-Boot] [PATCH 09/13 v3] ARM: OMAP3: Add MMC support
 2008-10-09 17:55 UTC 

[U-Boot] [PATCH 07/13 v3] ARM: OMAP3: Add memory and syslib common files
 2008-10-09 17:55 UTC 

[U-Boot] [PATCH 06/13 v3] ARM: OMAP3: Add board, clock and interrupts common files
 2008-10-09 17:54 UTC 

[U-Boot] [PATCH 05/13 v3] ARM: OMAP3: Add lowlevel init and sys_info common files
 2008-10-09 17:54 UTC 

[U-Boot] [PATCH 04/13 v3] ARM: OMAP3: Add ARM Cortex A8 common directory
 2008-10-09 17:53 UTC 

[U-Boot] [PATCH 03/13 v3] ARM: OMAP3: Add overo pin mux, omap3 and prototype headers
 2008-10-09 17:53 UTC 

[U-Boot] [PATCH 02/13 v3] ARM: OMAP3: Add i2c, memory and additional pin mux headers
 2008-10-09 17:52 UTC 

[U-Boot] [PATCH 01/13 v3] ARM: OMAP3: Add pin mux, clock and cpu headers
 2008-10-09 17:52 UTC 

[U-Boot] [PATCH 00/13 v3] ARM: OMAP3: Add support for some of TIs ARM-Cortex A8 OMAP3 boards
 2008-10-09 17:51 UTC 

[U-Boot] [PATCH] Fix USB init sequence for the lwmon5 board
 2008-10-09 14:04 UTC  (3+ messages)

[U-Boot] [PATCH] mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards
 2008-10-09 10:08 UTC  (3+ messages)
` [U-Boot] [PATCH] mpc83xx: fix PCI scan hang on the standaloneMPC837xE-MDS boards

[U-Boot] Automatic software updates in U-Boot
 2008-10-09  8:40 UTC  (13+ messages)
` [U-Boot] [PATCH v2 1/6] flash: factor out adjusting of Flash address to the end of sector
` [U-Boot] [PATCH v2 4/6] Restore alphabetic ordering in common/Makefile

[U-Boot] Run hello world with Uboot !
 2008-10-09  8:30 UTC  (11+ messages)

[U-Boot] ARM/Versatile - bootup
 2008-10-09  8:10 UTC 

[U-Boot] RV: Problem with flash on a MPC5200B board
 2008-10-09  7:50 UTC 

[U-Boot] [PATCH] cfi_flash write fix for AMD legacy
 2008-10-09  6:26 UTC 

[U-Boot] [PATCH] 85xx do not reset PIC if already configured
 2008-10-09  6:26 UTC 

[U-Boot] [PATCH] fsl_law clear enable before changing
 2008-10-09  6:25 UTC 

[U-Boot] working with loadb & bootm on u-boot-v2 for imx27ads Board
 2008-10-09  5:52 UTC  (2+ messages)

[U-Boot-Users] Freescale MPC8349EMDS hang on boot
 2008-10-09  5:46 UTC  (16+ messages)
                  ` [U-Boot-Users] Freescale MPC8349EMDS BCSR corruption
                          ` [U-Boot] "

[U-Boot] [PATCH] [Not for inclusion] Add support to verify UPM array
 2008-10-09  5:37 UTC 

[U-Boot] [PATCH V3] mpc8572 additional end-point mode
 2008-10-09  5:29 UTC 

[U-Boot] [PATCH] sh: Fix cannot execute a stand-alone application
 2008-10-09  5:05 UTC 

[U-Boot] [PATCH] Wait till UPM completes the write to array
 2008-10-09  4:59 UTC  (2+ messages)

[U-Boot] [PATCH][Re-Submit] Custom AFEB9260 board support
 2008-10-09  4:38 UTC  (3+ messages)
` [U-Boot] [PATCH][Re-Submit2] "

[U-Boot] [PATCH] 85xx if NUM_CPUS>1, print cpu number
 2008-10-09  4:38 UTC  (4+ messages)
` [U-Boot] [PATCH] fsl_pci_init do not scan bus when configured as an end-point
  ` [U-Boot] [PATCH] pixis do not print long help if not configured
    ` [U-Boot] [PATCH] Add cpu/8xxx to TAGS_SUBDIRS

[U-Boot] [PATCH] mpc83xx: add ELBC NAND support for the MPC837XEMDS boards
 2008-10-09  4:26 UTC  (2+ messages)
` [U-Boot] [PATCH] mpc83xx: add ELBC NAND support for the MPC837XEMDSboards

[U-Boot] Pull request: u-boot-fdt
 2008-10-09  2:19 UTC 

[U-Boot] [RFC][PATCH v4] bootm: Add sub commands
 2008-10-09  1:48 UTC  (9+ messages)
        ` [U-Boot] [RFC][PATCH v4] bootm: Add sub commands (sequence of commands to replicate bootm)

[U-Boot] [PATCH] Remove unwanted ';' at end of define
 2008-10-08 23:18 UTC  (2+ messages)

[PATCH] Remove unwanted ';' at end of define
 2008-10-08 23:12 UTC 

[U-Boot] [PATCH 1/6] Make DDR interleaving mode work correctly
 2008-10-08 22:52 UTC  (5+ messages)

[U-Boot] make clean problem
 2008-10-08 22:09 UTC  (6+ messages)

[U-Boot] [PATCH] Add IC Ident. Module (IIM) support for ADS5121
 2008-10-08 21:21 UTC  (2+ messages)

[U-Boot] [PATCH 1/2] Fix the incorrect DDR clk freq reporting on 8536DS
 2008-10-08 20:58 UTC  (4+ messages)
` [U-Boot] [PATCH 2/2] Do not init SATA when disabled

[U-Boot] [PATCH] MPC8572DS: Fix compile warnings
 2008-10-08 20:36 UTC 

[U-Boot] Please pull u-boot-mpc85xx.git
 2008-10-08 19:23 UTC 

[U-Boot] [PATCH 2/3] iMX31: Add support to copy NAND Flash code to RAM
 2008-10-08 18:52 UTC  (3+ messages)

[U-Boot] [PATCH] ARM DaVinci: Remove redundant setting of GD_FLG_RELOC for sffsdr board
 2008-10-08 17:59 UTC  (2+ messages)
` [U-Boot] [PATCH] ARM DaVinci: Remove redundant setting ofGD_FLG_RELOC "

[U-Boot] [PATCH 3/3 v5] ppc4xx: Add routine to retrieve CPU number
 2008-10-08 17:13 UTC 

[U-Boot] [PATCH 2/3 v5] ppc4xx: Add static support for 44x IBM SDRAM Controller
 2008-10-08 17:13 UTC 

[U-Boot] [PATCH 1/3 v5] ppc4xx: Add AMCC Arches board support (dual 460GT)
 2008-10-08 17:12 UTC 

[U-Boot] [PATCH 2/3 v5] ppc4xx: Add static support for 44x IBM SDRAM Controller
 2008-10-08 17:12 UTC 

[U-Boot] [PATCH 1/3 v4] ppc4xx: Add AMCC Arches board support (dual 460GT)
 2008-10-08 17:12 UTC 

[U-Boot] ARM Pull Request
 2008-10-08 17:09 UTC 

[U-Boot] [PATCH 1/6] ppc4xx: Handle other board variant in PMC440 FPGA code
 2008-10-08 16:20 UTC  (6+ messages)
` [U-Boot] [PATCH 2/6] ppc4xx: Clean up PMC440 header
  ` [U-Boot] [PATCH 3/6] ppc4xx: Fix esd loadpci command
    ` [U-Boot] [PATCH 4/6] ppc4xx: Update PMC440 board configuration
      ` [U-Boot] [PATCH 5/6] ppc4xx: Fix PMC440 BSP commands
        ` [U-Boot] [PATCH 6/6] ppc4xx: Update PMC440 board support

[U-Boot] Help building AT91 u-boot with Buildroot tools
 2008-10-08 15:13 UTC 

[U-Boot] [PATCH 1/4] Fix the NAND size overflow issue
 2008-10-08 14:58 UTC  (5+ messages)
` [U-Boot] [PATCH 2/4] Make the fsl_elbc_nand driver work for both 83xx and 85xx
    ` [U-Boot] [PATCH 2/4] Make the fsl_elbc_nand driver work for both 83xxand 85xx

[U-Boot] [PATCH 1/1 v2] ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change
 2008-10-08 14:15 UTC  (5+ messages)

[U-Boot] [PATCH] ppc4xx: Add GDSys neo 405EP board support
 2008-10-08 13:37 UTC 

[U-Boot] Antwort: Re: Antwort: Re: PATCH: IXP465 support and some IXP4xx rework, Sidewinder board support
 2008-10-08 13:35 UTC  (6+ messages)
` [U-Boot] Antwort: "
` [U-Boot] "

[U-Boot] [PATCH v2] hwmon: Add LM63 support
 2008-10-08 11:44 UTC 

[U-Boot] [PATCH] FSL: Fix get_cpu_board_revision() return value
 2008-10-08 11:41 UTC 

[U-Boot] [PATCH] hwmon: Add LM63 support
 2008-10-08  9:52 UTC 

[U-Boot] SDRAM controller initialization code
 2008-10-08  5:17 UTC  (2+ messages)

[U-Boot] how can i change u-boot load address?
 2008-10-08  2:22 UTC  (7+ messages)

[U-Boot] [PATCH] Red Black Tree support v2
 2008-10-08  2:01 UTC 

[U-Boot] [PATCH] Red Black Tree support
 2008-10-08  1:44 UTC  (3+ messages)

[U-Boot] [PATCH 3/3 v4] ppc4xx: Add routine to retrieve CPU number
 2008-10-07 23:07 UTC 

[U-Boot] [PATCH 2/3 v4] ppc4xx: Add static support for 44x IBM SDRAM Controller
 2008-10-07 23:06 UTC 

[U-Boot] [PATCH 1/3 v4] ppc4xx: Add AMCC Arches board support (dual 460GT)
 2008-10-07 23:06 UTC 

[U-Boot] [PATCH] Olimex SAM9-L9260 board support
 2008-10-07 22:55 UTC  (9+ messages)

[U-Boot] mpc83xx U-boot questions
 2008-10-07 22:24 UTC  (13+ messages)
            ` [U-Boot] U-boot Saveenv question
                    ` [U-Boot] U-boot Saveenv question --> final tested solution

[U-Boot] Help With TFTP
 2008-10-07 21:14 UTC 

[U-Boot] [PATCH 07/12 v2] ARM: OMAP3: Add memory and syslib common files, add NAND support
 2008-10-07 20:47 UTC  (12+ messages)

[U-Boot] [PATCH 3/3] iMX31: Add support to iMX31PDK board boots from NAND Flash
 2008-10-07 18:01 UTC 

[U-Boot] [PATCH 1/3] iMX31: Reducing start.S size to let boot from NAND
 2008-10-07 18:01 UTC 

[U-Boot] [PATCH 0/3] iMX31: Add iMX31 support to boots from NAND
 2008-10-07 18:01 UTC 


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox