messages from 2009-02-04 09:12:26 to 2009-02-05 20:01:36 UTC [more...]
[U-Boot] [PATCH 0/7] OMAP3: Add some additional improvements and fixes
2009-02-05 20:01 UTC (17+ messages)
` [U-Boot] [PATCH 1/7] OMAP3: Overo: Clean up pin mux and GPIO configuration
` [U-Boot] [PATCH 2/7] OMAP3: Beagle: Add board revision detection
` [U-Boot] [PATCH 3/7] OMAP3: Add OMAP3 auto detection
` [U-Boot] [PATCH 4/7] OMAP3: Pandora: Update pin mux
` [U-Boot] [PATCH 5/7] OMAP3: Add serial number based on die ID
[U-Boot] Flag -mno-cache-volatile to bypass the cache
2009-02-05 20:01 UTC (3+ messages)
[U-Boot] [PATCH] 86xx: Update CPU info output on bootup
2009-02-05 19:52 UTC
[U-Boot] Support Kilauea USB
2009-02-05 19:35 UTC (3+ messages)
[U-Boot] [PATCH] Add support for setting environment variable from RAM
2009-02-05 19:30 UTC (2+ messages)
[U-Boot] CONFIG_MP affects ability to erase upper portions of flash on 8572
2009-02-05 19:16 UTC
[U-Boot] [PATCH 1/2] 86xx: Update Global Utilities structure
2009-02-05 17:25 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] 86xx: Reset update
[U-Boot] [PATCH 0/9] ARM: Support for splashimage om i.MX31-based phycore "eet" variant
2009-02-05 17:22 UTC (72+ messages)
` [U-Boot] [PATCH 1/9] i.MX31: fix SPI driver for shorter than 32 bit transfers
` [U-Boot] MPC8548_eTSEC to Marvell 88E1145 E0 version Phy Initialization
` [U-Boot] [PATCH 2/9] i.MX31: add a simple gpio driver
` [U-Boot] [PATCH 3/9] i.MX31: support GPIO as a chip-select in the mxc_spi driver
` [U-Boot] [PATCH 4/9] A driver for the S6E63D6 SPI display controller from Samsung
` [U-Boot] [PATCH 5/9] ARM: remove unused variable
` [U-Boot] [PATCH 6/9] Add 16bpp BMP support
` [U-Boot] [PATCH 7/9] LCD: support 8bpp BMPs on 16bpp displays
` [U-Boot] [PATCH 8/9] video: add a i.MX31 framebuffer driver only for bitmaps so far
` [U-Boot] [PATCH 9/9] ARM: add an "eet" variant of the imx31_phycore board
` [U-Boot] [PATCH 0/9 v2] ARM: Support for splashimage om i.MX31-based phycore "eet" variant
` [U-Boot] [PATCH 1/9 v2] i.MX31: fix SPI driver for shorter than 32 bit transfers
` [U-Boot] [PATCH 2/9 v2] i.MX31: add a simple gpio driver
` [U-Boot] [PATCH 3/9 v2] i.MX31: support GPIO as a chip-select in the mxc_spi driver
` [U-Boot] [PATCH 4/9 v2] A driver for the S6E63D6 SPI display controller from Samsung
` [U-Boot] [PATCH 5/9 v2] ARM: remove unused variable
` [U-Boot] [PATCH 6/9 v2] Add 16bpp BMP support
` [U-Boot] [PATCH 7/9 v2] LCD: support 8bpp BMPs on 16bpp displays
` [U-Boot] [PATCH 8/9 v2] video: add a i.MX31 framebuffer driver
` [U-Boot] [PATCH 9/9 v2] ARM: add an "eet" variant of the imx31_phycore board
[U-Boot] [PATCH] nand_base: Add timeout for NAND reset command
2009-02-05 16:37 UTC (11+ messages)
[U-Boot] [PATCH] tsec: Wait for auto-negotiation to complete without link
2009-02-05 16:27 UTC (10+ messages)
[U-Boot] unassigned-patches/34: [PATCH] Add support for setting environment variable from RAM
2009-02-05 16:21 UTC (2+ messages)
[U-Boot] [PATCH] Coldfire: M527x: Add missing GPIO register address defines
2009-02-05 15:04 UTC
[U-Boot] What is the corect way to define MTD partitions
2009-02-05 14:57 UTC
[U-Boot] [PATCH 0/2] Initial Stamp9261 board support
2009-02-05 14:07 UTC (12+ messages)
` [U-Boot] [PATCH 1/2] Allow board specific overwriting of library code
` [U-Boot] [PATCH 2/2] Stamp9261 board support
[U-Boot] [PATCH] at91: Factored out common serial hardware initialization
2009-02-05 13:47 UTC (4+ messages)
[U-Boot] Kernel Uncompressing failed under Uboot
2009-02-05 13:45 UTC (2+ messages)
[U-Boot] U-Boot Digest, Vol 9, Issue 49
2009-02-05 13:42 UTC (2+ messages)
[U-Boot] coldfire M5329EVB demo problem
2009-02-05 13:04 UTC (6+ messages)
[U-Boot] [PATCH] mpc8349itx: allow SATA boot from the onboard SIL1334
2009-02-05 12:35 UTC
[U-Boot] Fantastic Prize
2009-02-05 11:03 UTC
[U-Boot] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git
2009-02-05 10:49 UTC
[U-Boot] [PATCH] cfi_flash: Fix typo in cfi_flash.c
2009-02-05 10:45 UTC
[U-Boot] [PATCH 1/2] flash/cfi_flash: Use virtual sector start address, not phys
2009-02-05 10:42 UTC (5+ messages)
[U-Boot] [PATCH] cfi_flash: Silence compilation warning
2009-02-05 10:26 UTC
[U-Boot] can't update U-boot when booting with BDI2000
2009-02-05 9:07 UTC (3+ messages)
[U-Boot] [PATCH v3] Add support for the digsy MTC board
2009-02-05 8:30 UTC (3+ messages)
[U-Boot] [PATCH 00/08 V2] Allow PCI bus address, PA, and VA to differ
2009-02-05 7:51 UTC (13+ messages)
` [U-Boot] [PATCH 1/8] mpc8641hpcn: Set up outbound pci windows before inbound
` [U-Boot] 86xx maintainership change?
` [U-Boot] [PATCH 4/8] mpc86xx: Add support to populate addr map based on BATs
` [U-Boot] [PATCH 5/8] mpc8641hpcn: Clean up PCI mapping concepts
` [U-Boot] [PATCH 6/8] MPC8641HPCN: Enable CONFIG_ADDR_MAP
` [U-Boot] [PATCH 8/8] mpc8641hpcn: Change PCI MEM pci bus address
[U-Boot] [PATCH 0/3] qong: support for Dave/DENX QongEVB-LITE
2009-02-05 3:43 UTC (7+ messages)
` [U-Boot] [PATCH 2/3] dnet: driver for Dave DNET ethernet controller
` [U-Boot] [PATCH 3/3] qong: support for Dave/DENX QongEVB-LITE board
[U-Boot] [PATCH 0/3][v2] qong: support for Dave/DENX QongEVB-LITE
2009-02-05 3:32 UTC (4+ messages)
` [U-Boot] [PATCH 1/3][v2] mx31: add GPIO registers definitions
` [U-Boot] [PATCH 2/3][v2] dnet: driver for Dave DNET ethernet controller
` [U-Boot] [PATCH 3/3][v2] qong: support for Dave/DENX QongEVB-LITE board
[U-Boot] Preparing a patch for u-boot
2009-02-05 3:09 UTC (2+ messages)
[PATCH] qong: changes to Dave/DENX Qong configuration
2009-02-05 3:08 UTC
[U-Boot] [RFC] [PATCH] at91: add support for PM9263 board
2009-02-04 23:10 UTC (3+ messages)
[U-Boot] [PATCH] tsec: Fix a bug in soft-resetting
2009-02-04 22:12 UTC (2+ messages)
[U-Boot] [PATCH 1/1] at91: use pre-built object to avoid weak function problem
2009-02-04 21:25 UTC (3+ messages)
` [U-Boot] [PATCH V2] at91: allow the lowlevel_init to be overwrite by the board
[U-Boot] [ERR] U-Boot Digest, Vol 9, Issue 39
2009-02-04 21:05 UTC
[U-Boot] ARM mach-types.h sync request
2009-02-04 20:56 UTC
[U-Boot] [PATCH] nand_base: Silence warning when CONFIG_SYS_NAND_QUIET_TEST
2009-02-04 19:39 UTC
[U-Boot] [ERR] U-Boot Digest, Vol 9, Issue 33
2009-02-04 17:33 UTC
[U-Boot] [ERR] U-Boot Digest, Vol 9, Issue 35
2009-02-04 17:32 UTC
[U-Boot] [PATCH] ARM: synchronize mach-types.h with linux 2.6.29-rc3
2009-02-04 16:50 UTC (3+ messages)
[U-Boot] [PATCH v3] MPC8349ITX: several config issues fixed
2009-02-04 16:27 UTC
[U-Boot] [PATCH v2] MPC8349ITX: several config issues fixed
2009-02-04 16:24 UTC
[U-Boot] [PATCH 07/07] Coldfire: mcfmii: Allow non-autonegotiating PHYs to use mii command
2009-02-04 15:44 UTC (2+ messages)
` [U-Boot] [PATCH 07/07] [REBASED] "
[U-Boot] [PATCH 06/07] Coldfire: Applied baudrate formula of serial_init to serial_setbrg
2009-02-04 15:42 UTC (3+ messages)
` [U-Boot] [PATCH 06/07] [REBASED] "
` [U-Boot] [PATCH 06/07] [REBASED V2] "
[U-Boot] [PATCH] MPC8349ITX: support of DDR > 256MB
2009-02-04 15:42 UTC
[U-Boot] [PATCH 04/07] Coldfire: M5271: Allow board header file to specify clock multiplier
2009-02-04 15:37 UTC (2+ messages)
` [U-Boot] [PATCH 04/07] [REBASED] "
[U-Boot] [PATCH 03/07] Coldfire: M5271EVB: Remove usage of CONFIG_SYS_FECI2C
2009-02-04 15:36 UTC (2+ messages)
` [U-Boot] [PATCH 03/07] [REBASED] "
[U-Boot] [PATCH] 85xx: Format cpu freq printing to handle 8 cores
2009-02-04 15:35 UTC
[U-Boot] [PATCH 02/07] Coldfire: cmd_bdinfo cleanup
2009-02-04 15:21 UTC (3+ messages)
` [U-Boot] [PATCH 02/07 V2] "
` [U-Boot] [PATCH 02/07 V2] [REBASED] "
[U-Boot] [PATCH 01/07] Coldfire: Fix half-baud UART by adding M5271 to Coldfire v2 core list
2009-02-04 15:19 UTC (2+ messages)
` [U-Boot] [PATCH 01/07] [REBASED] "
[U-Boot] [PATCH 05/07] Coldfire: M5271EVB: Board header update (has dependencies)
2009-02-04 15:10 UTC (2+ messages)
` [U-Boot] [PATCH 05/07 V2] Coldfire: M5271EVB: Board header update (dependencies)
[U-Boot] running U-boot from ram
2009-02-04 11:12 UTC (2+ messages)
[U-Boot] [PATCH] Fix compiler warning
2009-02-04 11:10 UTC (3+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox