messages from 2012-02-06 22:41:04 to 2012-02-08 22:58:19 UTC [more...]
[U-Boot] [PATCH 1/6] .gitignore: Add .su files
2012-02-08 22:58 UTC (5+ messages)
` [U-Boot] [PATCH 2/6] config.mk: Make cc-option create a file under include/generated
` [U-Boot] [PATCH 3/6] arm: Check for -fstack-usage support
` [U-Boot] [PATCH 4/6] spl.c: Use __noreturn decorator
` [U-Boot] [PATCH 5/6] README: Add more SPL config options
[U-Boot] [PATCH 00/28] Add link-local addressing support
2012-02-08 22:52 UTC (7+ messages)
` [U-Boot] [PATCH 01/28] net: Remove volatile from all of net except the eth driver interface
` [U-Boot] [PATCH 17/28] net: Refactor to separate the UDP handler from the ARP handler
[U-Boot] [PATCH] arm: Add option to disable code relocation
2012-02-08 22:05 UTC (30+ messages)
[U-Boot] [PATCH v3 0/7] Clean up ehci-omap and extend support for omap3/4 socs
2012-02-08 17:42 UTC (3+ messages)
` [U-Boot] [PATCH v3 6/7] usb: ulpi: Extend the existing ulpi framework
[U-Boot] Fastboot gadget, v2. repost
2012-02-08 17:36 UTC (9+ messages)
` [U-Boot] [PATCH 1/2] image: add support for Android's boot image format
[U-Boot] Marvell Alaska Phy loopback mode support using RGMII interface
2012-02-08 17:13 UTC
[U-Boot] [PATCH] i.MX28: Fix ref_cpu clock setup
2012-02-08 16:28 UTC (21+ messages)
` [U-Boot] [PATCH 1/4 v4] Renamed mx28_register to mx28_register_32 to prepare for mx28_register_8
` [U-Boot] [PATCH 2/4 v4] Introducing 8-bit wide register, mx28_register_8
` [U-Boot] [PATCH 3/4 v4] Fix erroneous 32-bit access to hw_clkctrl_frac0 and hw_clkctrl_frac1 registers
` [U-Boot] [PATCH 4/4 v4] Preventing needless switching on and off PLL bypass mode, allowing allow single-stepping through the SPL
[U-Boot] Skipping relocation RAM to RAM, esp. on i.MX6?
2012-02-08 16:23 UTC (17+ messages)
` [U-Boot] i.MX5/6 U-Boot: Cache enabling (was: Re: Skipping relocation RAM to RAM, esp. on i.MX6?)
` [U-Boot] i.MX5/6 U-Boot: Cache enabling
[U-Boot] [PATCH 0/2] usb/mx6q: USB EHCI support for MX6Q boards
2012-02-08 15:50 UTC (4+ messages)
` [U-Boot] [PATCH 1/2] usb/ehci: Add USB support for the MX6Q
` [U-Boot] [PATCH 2/2] mx6qsabrelite: add and enable USB Host 1 support
[U-Boot] [PATCH 1/3] doc: complete, typos
2012-02-08 15:31 UTC (3+ messages)
` [U-Boot] [PATCH 2/3] cmd_eeprom: typo
` [U-Boot] [PATCH 3/3] usb_ether: fix typo
[U-Boot] [PATCH] beagle: enable DVI_PUP
2012-02-08 15:24 UTC
[U-Boot] [PATCH] mcx: Enable command line editing
2012-02-08 14:49 UTC
[U-Boot] [PATCH 1/5] mx53loco: Use gpio_direction_input prior to gpio_get_value
2012-02-08 13:17 UTC (8+ messages)
` [U-Boot] [PATCH 2/5] mx53ard: "
` [U-Boot] [PATCH 3/5] mx53evk: "
` [U-Boot] [PATCH 4/5] mx53smd: "
` [U-Boot] [PATCH 5/5] mx51evk: "
[U-Boot] [PATCH] EXYNOS: SMDK5250: Add support for DDR3 memory
2012-02-08 11:44 UTC
[U-Boot] [PATCH v3] common/image.c: align usage of fdt_high with initrd_high
2012-02-08 11:39 UTC (2+ messages)
[U-Boot] [PATCH V6 - Part 1 - 1/1] mx6q: define GPIO macros for translating between ordinals and port:index
2012-02-08 11:23 UTC (12+ messages)
` [U-Boot] [PATCH V6 - Part 2 - 1/3] mxc_spi: move machine specifics into CPU headers
` [U-Boot] [PATCH V6 - Part 2 - 2/3] mx6q: Add support for ECSPI through mxc_spi driver
` [U-Boot] [PATCH V6 - Part 2 - 3/3] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform
` [U-Boot] [PATCH V6 - Part 4 - 1/1] mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
` [U-Boot] [PATCH V6 - Part 5 - 1/1] mx6q: mx6qsabrelite: Conditionally define macros for environment in serial flash
[U-Boot] [PATCH v2] davinci: cleanup davinci_sync_env_enetaddr() fucntion
2012-02-08 11:14 UTC
[U-Boot] [PATCH V2] bugfix: all Marvell specific build fails due to undefined reference to `get_ticks'
2012-02-08 11:09 UTC (2+ messages)
[U-Boot] adding a new command to help menu
2012-02-08 11:06 UTC (2+ messages)
[U-Boot] MPC8313 DDR2 configuration
2012-02-08 10:15 UTC (3+ messages)
[U-Boot] [PATCH 1/4] fpga: add definition for Xilinx Spartan-6 XC6SLX4
2012-02-08 10:09 UTC (3+ messages)
` [U-Boot] [PATCH V5] ARM: omap3: Added Teejet mt_ventoux
[U-Boot] [PATCH] OMAP3: TAM3517: update ehci interface
2012-02-08 10:08 UTC (8+ messages)
` [U-Boot] [PATCH V2] "
[U-Boot] [PATCH V6 2/2] mcx: support for HTKW mcx board
2012-02-08 10:07 UTC (3+ messages)
` [U-Boot] [PATCH V8] "
[U-Boot] Pull request for u-boot-marvell.git
2012-02-08 9:57 UTC
[U-Boot] v2011.12 and later do not boot on dreamplug
2012-02-08 9:54 UTC (5+ messages)
` [U-Boot] [PATCH] kirkwood_spi: correct access to irq_mask register
[U-Boot] [PATCH] kirkwood: add support for D-Link DNS-325
2012-02-08 9:53 UTC (2+ messages)
[U-Boot] [PATCH 0/4] Add USB support to orion5x and edminiv2
2012-02-08 9:51 UTC (2+ messages)
[U-Boot] [PATCH] edminiv2: add hush parser and long help
2012-02-08 9:51 UTC (3+ messages)
` [U-Boot] [PATCH V2] edminiv2: add hush parser, cmdline editing "
[U-Boot] [PATCH v4] arm, arm-kirkwood: disable l2c before linux boot
2012-02-08 9:50 UTC (2+ messages)
[U-Boot] [PATCH 1/2] arm/km: speed up i2c access for keymile boards
2012-02-08 9:47 UTC (3+ messages)
[U-Boot] [PATCH] bugfix: all Marvell specific build fails due to undefined reference to `get_ticks'
2012-02-08 8:49 UTC (3+ messages)
[U-Boot] [PATCH] MX27: add missing get_tbclk()
2012-02-08 8:28 UTC (4+ messages)
` [U-Boot] [PATCH V2] "
[U-Boot] [PATCH v4 0/7] Add and Clean up ehci-omap and extend support for omap3/4 socs
2012-02-08 8:09 UTC (12+ messages)
` [U-Boot] [PATCH v4 3/7] ehci-omap: driver for EHCI host on OMAP3
` [U-Boot] [PATCH v4 4/7] ehci-omap: Clean up added ehci-omap.c
` [U-Boot] [PATCH v4 5/7] OMAP3+: Clock: Adding ehci clock enabling
` [U-Boot] [PATCH v4 6/7] OMAP4: clock-common: Move the usb dppl configuration to new func
` [U-Boot] [PATCH v4 7/7] OMAP4: ehci-omap: enable ehci-omap for panda boards
[U-Boot] [PATCH v2] net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back
2012-02-08 7:13 UTC (5+ messages)
[U-Boot] http://patchwork.ozlabs.org/patch/136415/ seems to break HUSH parser?
2012-02-08 6:30 UTC (5+ messages)
[U-Boot] [PATCH 1/2] i.MX28: Reformat the DRAM memory configuration data
2012-02-08 4:53 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] i.MX28: Enable additional DRAM address bits
[U-Boot] Build u-Boot for NAND boot on i.MX53x platform
2012-02-08 4:16 UTC
[U-Boot] [PATCH v2 1/2] RFC: create u-boot-common.lds
2012-02-08 2:51 UTC (11+ messages)
` [U-Boot] [PATCH v2 2/2] RFC: Let linker create phy array
[U-Boot] [PATCH v5 1/5] net: fec_mxc: add 1000 Mbps selection
2012-02-08 0:08 UTC (5+ messages)
` [U-Boot] [PATCH v5 2/5] net: fec_mxc: add PHYLIB support
` [U-Boot] [PATCH v5 3/5] net: phy: add support for Micrel's KSZ9021
` [U-Boot] [PATCH v5 4/5] net: phy: make board_phy_config responsible for calling drv->config
` [U-Boot] [PATCH v5 5/5] i.mx6q: mx6qsabrelite: Update the network configuration
[U-Boot] [PATCH] ARMV7: Fix duplicate use of "b" parameter in ACTIM_CTRLA definition
2012-02-07 21:02 UTC (6+ messages)
` [U-Boot] [PATCH v2] "
` [U-Boot] [PATCH v3] "
[U-Boot] hush saveenv problem
2012-02-07 20:50 UTC (2+ messages)
[U-Boot] [PATCH 2/2] omap3logic: Add missing GPMC pinmux for LAN92xx access
2012-02-07 18:15 UTC
[U-Boot] [PATCH 0/4] i.MX28: Small correction to pin configuration
2012-02-07 17:28 UTC (6+ messages)
` [U-Boot] [PATCH 1/4] Debug UART pins configured to 3v3, instead of 1v8
` [U-Boot] [PATCH 2/4] Correction to SSP0 drive strengths
` [U-Boot] [PATCH 3/4] SSP1 pins configured for MMC1
` [U-Boot] [PATCH 4/4] Added NAND flash pin configuration
[U-Boot] [PATCH] MX28: Fix get_timer() / get_tbclk() issue
2012-02-07 17:08 UTC (2+ messages)
[U-Boot] [PATCH V3] mx28: fix SPL code to make USB booting work
2012-02-07 17:06 UTC (4+ messages)
[U-Boot] [PATCH] i.MX28: Fix VDDIO and VDDA setup
2012-02-07 17:03 UTC (2+ messages)
[U-Boot] [PATCH 0/2] i.mx28: Elimintated magic numbers for scratch register addresses
2012-02-07 17:01 UTC (6+ messages)
` [U-Boot] [PATCH 1/2] i.mx28: Added register definitions for DIGCTL registers
` [U-Boot] [PATCH 2/2] i.mx28: Replaced magic numbers for scratch register addresses with register definitions
[U-Boot] [PATCH] Tegra: mmc: Fixed handling of interrupts in timeouts
2012-02-07 16:17 UTC
[U-Boot] [PATCH 1/2] RFC: create u-boot-common.lds
2012-02-07 15:21 UTC (6+ messages)
` [U-Boot] [PATCH 2/2] RFC: Let linker create phy array
[U-Boot] Integity validation (checksum) of a squashfs root file system
2012-02-07 14:24 UTC (5+ messages)
[U-Boot] [PATCH][v2]powerpc/8xxx:Add MPH controller support in USB device-tree fixup
2012-02-07 14:06 UTC (2+ messages)
[U-Boot] U-boot environment variables keep disappearing
2012-02-07 10:04 UTC
[U-Boot] Pull request: u-boot-x86
2012-02-07 9:46 UTC
[U-Boot] [PATCH V2] mx28: fix SPL code to make USB booting work
2012-02-07 9:29 UTC (3+ messages)
[U-Boot] [PATCH] i.MX28: digctrl registers added
2012-02-07 9:15 UTC (4+ messages)
` [U-Boot] [PATCH] Elimintated magic numbers for scratch register addresses
[U-Boot] [PATCH 1/3] mx28evk: add RTC support
2012-02-07 8:14 UTC (6+ messages)
` [U-Boot] [PATCH 2/3] mx28evk: add USB support
` [U-Boot] [PATCH 3/3] mx28evk: add SPI support
[U-Boot] [PATCH 1/1] MX5:MX53: support for Freescale MX53LOCO
2012-02-07 8:11 UTC (6+ messages)
[U-Boot] [PATCH 3/6] cm-t35: add EEPROM module and pass Linux a serial number
2012-02-07 8:01 UTC (6+ messages)
` [U-Boot] [PATCH v2 "
[U-Boot] Regarding bootscreen /splash screen
2012-02-07 7:59 UTC
[U-Boot] [RFC PATCH 0/4] Enable Thumb build for ARM platforms
2012-02-07 7:49 UTC (7+ messages)
` [U-Boot] [RFC PATCH 1/4] ARM: enable Thumb build
` [U-Boot] [RFC PATCH 2/4] OMAP3+: fix issues with "
[U-Boot] [PATCH] mx6qarm2: fix build error for board_mmc_getcd()
2012-02-07 7:22 UTC (6+ messages)
[U-Boot] [PATCH]powerpc/8xxx: Cleanup USB device-tree fixup
2012-02-07 5:17 UTC
[U-Boot] [U-Boot-Users]-boot monitor function
2012-02-07 5:15 UTC
[U-Boot] flash post test
2012-02-07 4:32 UTC (8+ messages)
[U-Boot] [PATCH v4 1/5] net: fec_mxc: add 1000 Mbps selection
2012-02-07 1:29 UTC (3+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox