messages from 2012-06-11 19:56:00 to 2012-06-14 21:45:22 UTC [more...]
[U-Boot] [PATCH 0/4] USB and cache related fixes
2012-06-14 21:45 UTC (13+ messages)
` [U-Boot] [PATCH 1/4] ehci-omap: Do not call dcache_off from omap_ehci_hcd_init
` [U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions
` [U-Boot] [PATCH 3/4] ehci-hcd.c: Add a new USB_DMA_MINALIGN define for cache alignment
` [U-Boot] [PATCH 4/4] musb_core.h: "
` [U-Boot] [PATCH v2 0/3] USB and cache related fixes
` [U-Boot] [PATCH v2 1/3] ehci-omap: Do not call dcache_off from omap_ehci_hcd_init
` [U-Boot] [PATCH v2 2/3] cache_v7: Check for dcache enablement in dcache flush functions
[U-Boot] [PATCH 1/1] tegra: seaboard: Initialize multiple USB controllers at once
2012-06-14 18:47 UTC (3+ messages)
[U-Boot] FW: Is RSA algorithm support for the software authentication in u-boot?
2012-06-14 18:45 UTC (2+ messages)
[U-Boot] [PATCH 1/1] tegra: usb: Fix device enumeration problem of USB1
2012-06-14 18:09 UTC (2+ messages)
[U-Boot] [PATCH 0/6] Support for CPSW switch
2012-06-14 15:19 UTC (3+ messages)
` [U-Boot] [PATCH 2/6] cpsw: add driver for cpsw ethernet device
[U-Boot] [PATCH v2 0/3] Bug fixes for LaCie devices
2012-06-14 15:18 UTC (3+ messages)
[U-Boot] u-boot on c6x CPU ( texas instruments c6000 )
2012-06-14 15:16 UTC
[U-Boot] [PATCH] ARM: support for cache coherent allocations
2012-06-14 15:13 UTC (2+ messages)
[U-Boot] [PATCH v2 0/4] Board support and feature for LaCie devices
2012-06-14 15:11 UTC (2+ messages)
[U-Boot] [PATCH] i.MX6 USDHC: Use the ESDHC clock
2012-06-14 13:44 UTC
[U-Boot] [PATCH V2] MMC: DWMMC: Add DWMMC driver
2012-06-14 13:36 UTC (7+ messages)
[U-Boot] Is RSA algorithm support for the software authentication in u-boot?
2012-06-14 12:31 UTC
[U-Boot] [PATCH 0/6] updates for keymile powerpc83xx boards
2012-06-14 10:55 UTC (3+ messages)
` [U-Boot] [PATCH 1/6] powerpc/83xx/km: use tuxx1.h for kmsupx5 target
[U-Boot] [PATCH 1/4] mcx: increased buffer for command line
2012-06-14 8:34 UTC (4+ messages)
` [U-Boot] [PATCH 2/4] OMAP3: mcx: set pinmux for uart4
` [U-Boot] [PATCH 3/4] OMAP3: mcx: updated default environment
` [U-Boot] [PATCH 4/4] OMAP3: mcx: read hot-water-button after reset
[U-Boot] [PATCH 1/4] video: omap3_dss: add setup for LCD
2012-06-14 8:29 UTC (4+ messages)
` [U-Boot] [PATCH 2/4] OMAP3: added clock definitions for OMAP3 DSS driver
` [U-Boot] [PATCH 3/4] OMAP3: twister: add video support
` [U-Boot] [PATCH 4/4] OMAP3: mt_ventoux: add video/ splashscreen support
[U-Boot] [PATCH] arm: omap3: cm-t35: minor comment and printf change
2012-06-14 5:41 UTC
[U-Boot] [RFC v2 1/3] imx-common/cmd_resetmode.c: add imx resetmode command
2012-06-14 1:01 UTC
[U-Boot] [RFC v2 2/3] mx6qsabrelite: add resetmode support
2012-06-13 23:53 UTC (2+ messages)
` [U-Boot] [RFC v2 3/3] mx53evk: "
[U-Boot] [PATCH v2 0/19] tegra: Add display driver and LCD support for Seaboard
2012-06-13 23:09 UTC (23+ messages)
` [U-Boot] [PATCH v2 01/19] Add gpio_request() to asm-generic header
` [U-Boot] [PATCH v2 02/19] fdt: Add debugging to fdtdec_get_int/addr()
` [U-Boot] [PATCH v2 03/19] fdt: Add function to look up a phandle's register address
` [U-Boot] [PATCH v2 04/19] fdt: Add header guard to fdtdec.h
` [U-Boot] [PATCH v2 05/19] tegra: Use const for pinmux_config_pingroup/table()
` [U-Boot] [PATCH v2 06/19] tegra: Add display support to funcmux
` [U-Boot] [PATCH v2 07/19] tegra: fdt: Add LCD definitions for Tegra
` [U-Boot] [PATCH v2 08/19] tegra: Add support for PWFM
` [U-Boot] [PATCH v2 09/19] tegra: Add SOC support for display/lcd
` [U-Boot] [PATCH v2 10/19] tegra: Add LCD driver
` [U-Boot] [PATCH v2 11/19] tegra: Add LCD support to Nvidia boards
` [U-Boot] [PATCH v2 12/19] arm: Add control over cachability of memory regions
` [U-Boot] [PATCH v2 13/19] lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment
` [U-Boot] [PATCH v2 14/19] lcd: Add support for flushing LCD fb from dcache after update
` [U-Boot] [PATCH v2 15/19] tegra: Align LCD frame buffer to section boundary
` [U-Boot] [PATCH v2 16/19] tegra: Support control of cache settings for LCD
` [U-Boot] [PATCH v2 17/19] tegra: fdt: Add LCD definitions for Seaboard
` [U-Boot] [PATCH v2 18/19] lcd: Add CONSOLE_SCROLL_LINES option to speed console
` [U-Boot] [PATCH v2 19/19] tegra: Enable display/lcd support on Seaboard
[U-Boot] [PATCH] env_onenand: set ONENAND_MAX_ENV_SIZE to CONFIG_ENV_SIZE
2012-06-13 21:24 UTC
[U-Boot] [PATCH 1/3] BOOT: Fix unused variable issue when enabling bootz support
2012-06-13 21:03 UTC (4+ messages)
` [U-Boot] [PATCH 2/3] tegra: enable bootz command
` [U-Boot] [PATCH 3/3] tegra: define fdt_load/fdt_high variables
[U-Boot] [PATCH] hawkboard/omapl-138: Add support for generating ais image for hawkboard
2012-06-13 18:39 UTC
[U-Boot] mx53loco build fails with CONFIG_VIDEO disabled
2012-06-13 17:59 UTC (6+ messages)
[U-Boot] [PATCH] mx6: Avoid writing to read-only bits in imximage.cfg
2012-06-13 17:40 UTC (13+ messages)
[U-Boot] [PATCH v2] tx25: Use generic gpio_* calls
2012-06-13 16:34 UTC (4+ messages)
[U-Boot] [PATCH 0/2] patman: Various fixes
2012-06-13 16:29 UTC (4+ messages)
` [U-Boot] [PATCH 1/2] patman: Change the location of patman config file
[U-Boot] [PATCH] powerpc/CoreNet: add tool to support pbl image build
2012-06-13 15:29 UTC (13+ messages)
[U-Boot] [PATCH v2] omap4: Use a smaller M,N couple for IVA DPLL
2012-06-13 15:16 UTC
[U-Boot] [PATCH] omap4: Use a smaller M,N couple for IVA DPLL
2012-06-13 15:12 UTC (5+ messages)
[U-Boot] [PATCH] integrator: break out common config
2012-06-13 13:37 UTC (2+ messages)
[U-Boot] [PATCH v2 00/14] updates for Keymile Marvell boards
2012-06-13 13:33 UTC (15+ messages)
` [U-Boot] [PATCH v2 01/14] arm/km: add kmnusa board support
` [U-Boot] [PATCH v2 02/14] arm/km: add kmcoge5un "
` [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood
` [U-Boot] [PATCH v2 04/14] arm/km: remove portl2.h and use km_kirkwood instead
` [U-Boot] [PATCH v2 05/14] arm/km: correct init of 88e6352 switch in the reset_phy function
` [U-Boot] [PATCH v2 06/14] arm/km: enable BOCO2 FPGA download support
` [U-Boot] [PATCH v2 07/14] arm/km: cleanup km_kirkwood boards
` [U-Boot] [PATCH v2 08/14] arm/km: redefine piggy 4 reg names to avoid conflicts
` [U-Boot] [PATCH v2 09/14] arm/km: add support for external switch configuration
` [U-Boot] [PATCH v2 10/14] arm/km: enable external switch configuration for kmnusa
` [U-Boot] [PATCH v2 11/14] arm/km: skip FPGA config when already configured
` [U-Boot] [PATCH v2 12/14] arm/km: support the 2 PCIe fpga resets
` [U-Boot] [PATCH v2 13/14] arm/km: add implementation for read_dip_switch
` [U-Boot] [PATCH v2 14/14] arm/km: remove calls to kw_gpio_* in board_early_init_f
[U-Boot] [PATCH] arm/kirkwood: protect the ENV_SPI #defines
2012-06-13 13:03 UTC
[U-Boot] [PATCH] arm/km: use spi claim bus to switch between SPI and NAND
2012-06-13 13:01 UTC
[U-Boot] [PATCH 0/7] common/lcd cleanup
2012-06-13 12:55 UTC (4+ messages)
` [U-Boot] [PATCH 2/7] common lcd: simplify #ifdefs
[U-Boot] [PATCH 0/17] tegra: Add display driver and LCD support for Seaboard
2012-06-13 12:25 UTC (11+ messages)
` [U-Boot] [PATCH 04/17] tegra: Add display support to funcmux
` [U-Boot] [PATCH 11/17] lcd: Add CONFIG_ALIGN_LCD_TO_SECTION to align lcd for MMU
` [U-Boot] [PATCH 12/17] lcd: Add support for flushing LCD fb from dcache after update
[U-Boot] [PATCH 00/20] updates for Keymile Marvell boards
2012-06-13 12:16 UTC (29+ messages)
` [U-Boot] [PATCH 02/20] arm/km: use correct kw_gpio function for NAND/SPI switching
` [U-Boot] [PATCH 04/20] arm/km: add kmnusa board support
` [U-Boot] [PATCH 05/20] arm/km: add kmcoge5un "
` [U-Boot] [PATCH 10/20] arm/km: cleanup km_kirkwood boards
` [U-Boot] [PATCH 12/20] arm/km: add support for external switch configuration
` [U-Boot] [PATCH 20/20] arm/km: remove calls to kw_gpio_* in board_early_init_f
[U-Boot] imx: gpio cleanups
2012-06-13 11:37 UTC (8+ messages)
` [U-Boot] [PATCH 1/3] imx25: Move MXC_GPIO_PORT_TO_NUM to imx-regs.h
[U-Boot] [PATCH v2 0/7] feature additions and fixes for da850/omap-l138
2012-06-13 10:29 UTC (2+ messages)
[U-Boot] [PATCH 0/8] Minor fixes and start of consolidation onto mxs SoC
2012-06-13 9:07 UTC (9+ messages)
` [U-Boot] [PATCH 1/8] m28evk: use same notation to alloc the 128kB stack
` [U-Boot] [PATCH 3/8] mx28evk: ensure command definition is in alphabetic order
` [U-Boot] [PATCH 5/8] m28evk: fix board config include guardian macro name
` [U-Boot] [PATCH 6/8] mx28evk: "
[U-Boot] [PATCH 1/3] m28evk: use same notation to alloc the 128kB stack
2012-06-13 9:06 UTC (3+ messages)
` [U-Boot] [PATCH 2/3] m28evk: drop duplicated definition of CONFIG_OF_LIBFDT
[U-Boot] [PATCH 1/8] MX28: Fix a typo in mx28_reg_8 macro
2012-06-13 9:06 UTC (2+ messages)
[U-Boot] [PATCH 0/4] OMAP4/5: Remove non-essential clocks, dplls, pads configurations
2012-06-13 5:53 UTC (5+ messages)
` [U-Boot] [PATCH 1/4] ARM: OMAP4/5: Move gpmc clocks to essential group
` [U-Boot] [PATCH 2/4] ARM: OMAP4/5: Move USB "
` [U-Boot] [PATCH 3/4] ARM: OMAP4/5: Move USB pads to essential list
` [U-Boot] [PATCH 4/4] ARM: OMAP4/5: Do not configure non essential pads, clocks, dplls
[U-Boot] [PATCH 1/8] arm/davinci: fix DDR2/mDDR memory controller initialization for Omap L138
2012-06-12 21:15 UTC (8+ messages)
` [U-Boot] [PATCH 2/8] arm/davinci/da850: add uart0 pinmux
` [U-Boot] [PATCH 3/8] serial/ns16550: ns16550 has a different register layout on SOC_DA8XX
` [U-Boot] [PATCH 4/8] mtd/spi/spi_flash: support CMD_READ_ID=0x90 case
` [U-Boot] [PATCH 5/8] mtd/spi: add sst25l driver
` [U-Boot] [PATCH 6/8] MMC: u-boot-spl may be compiled without partition support
` [U-Boot] [PATCH 7/8] arm/davinci: spl - boot device selection
` [U-Boot] [PATCH 8/8] arm/davinci: spl - add compressed u-boot image support
[U-Boot] [PATCH v3 0/14] split tegra20 arm7 code into separate SPL
2012-06-12 19:55 UTC (21+ messages)
` [U-Boot] [PATCH v3 01/14] tegra20: rename tegra2 -> tegra20
` [U-Boot] [PATCH v3 08/14] tegra20: add SPL config options for tegra20 boards
` [U-Boot] [PATCH v3 09/14] tegra20: add u-boot.t2 target
` [U-Boot] [PATCH v3 10/14] tegra: move SDRAM param save to later in boot
` [U-Boot] [PATCH v3 11/14] tegra20: Remove CPU init code from tegra20 u-boot
[U-Boot] [PATCH 1/3] tegra: add GMC/GMD funcmux entry for SFLASH
2012-06-12 18:33 UTC (3+ messages)
` [U-Boot] [PATCH 2/3] tegra: add pin_mux_spi() board initialization function
` [U-Boot] [PATCH 3/3] tegra: trimslice: set up serial flash pinmux
[U-Boot] [PATCH 01/10] mx53loco: Remove unused SOBJS
2012-06-12 17:30 UTC (2+ messages)
[U-Boot] [PATCH] mx53: Fix mask for SATA reference clock
2012-06-12 17:24 UTC (4+ messages)
[U-Boot] [PATCH V2] i.MX: fsl_esdhc: allow use with cache enabled
2012-06-12 17:23 UTC (8+ messages)
[U-Boot] [PATCH] mx53loco: Fix revision of Dialog boards
2012-06-12 17:19 UTC (3+ messages)
` [U-Boot] [PATCH v2] "
[U-Boot] [PATCH] i.mx: i.mx6x: NO_MUX_I/NO_PAD_I not set correctly
2012-06-12 17:05 UTC (2+ messages)
[U-Boot] [PATCH 1/9] Define UART4 and UART5 base addresses
2012-06-12 17:02 UTC (4+ messages)
` [U-Boot] [PATCH 2/9] NET: fec_mxc.c: Add support for MII for MX5 SOCs
[U-Boot] [PATCH 0/2] This patch series contains support for interrupt and USB gadget in MSM7x27a surf board
2012-06-12 11:47 UTC (5+ messages)
` [U-Boot] [PATCH 1/2] MSM7x27a:Add support for interrupt
[U-Boot] [PATCH][v3] powerpc/CoreNet: add tool to support pbl image build
2012-06-12 8:11 UTC
[U-Boot] [PATCH 0/8 V2] EXYNOS5: Enable I2C support
2012-06-12 5:52 UTC (7+ messages)
` [U-Boot] [PATCH 1/8 V2] EXYNOS: CLK: Add i2c clock
` [U-Boot] [PATCH 3/8 V2] EXYNOS: PINMUX: Add pinmux support for I2C
` [U-Boot] [PATCH 6/8 V2] I2C: Modify the I2C driver for EXYNOS5
[U-Boot] pull request for u-boot-tegra/master
2012-06-11 21:59 UTC (7+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox