messages from 2012-06-15 21:48:26 to 2012-06-20 14:52:20 UTC [more...]
[U-Boot] [PATCH v2 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there
2012-06-20 14:52 UTC (7+ messages)
` [U-Boot] [PATCH v4 "
` [U-Boot] [PATCH v4 2/2] hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c
[U-Boot] [PATCH 6/9 V2] Exynos5: DDR3: Adding the DDR3 memory setup for Exynos5250 Rev 1.0
2012-06-20 12:12 UTC (6+ messages)
` [U-Boot] [PATCH 7/9 V2] EXYNOS5: CLOCK: Modify MPLL clock out "
` [U-Boot] [PATCH 8/9 V2] EXYNOS5 : Modify pinnumx settings as per "
` [U-Boot] [PATCH 9/9 V2] SMDK5250: Enable UART and MMC for "
[U-Boot] [PATCH 5/9 V2] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0
2012-06-20 11:09 UTC
[U-Boot] [PATCH 4/9 V2] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0
2012-06-20 11:08 UTC
[U-Boot] [PATCH 0/9 V2]EXYNOS5: Support for Exynos5250 Rev 1.0
2012-06-20 11:02 UTC (4+ messages)
` [U-Boot] [PATCH 1/9 V2] ARCH: SPL: Add parametric board initializer
` [U-Boot] [PATCH 2/9 V2] SMDK5250: SPL: Define "
` [U-Boot] [PATCH 3/9 V2] SMDK5250: Add smdk5250-uboot-spl.lds
[U-Boot] [PATCH 0/9]EXYNOS5: Support for Exynos5250 Rev 1.0
2012-06-20 10:40 UTC (10+ messages)
` [U-Boot] [PATCH 1/9] ARCH: SPL: Add parametric board initializer
` [U-Boot] [PATCH 2/9] SMDK5250: SPL: Define "
` [U-Boot] [PATCH 3/9] SMDK5250: Add smdk5250-uboot-spl.lds
` [U-Boot] [PATCH 4/9] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0
` [U-Boot] [PATCH 5/9] EXYNOS5: CLOCK: Add clock support "
` [U-Boot] [PATCH 6/9] Exynos5: DDR3: Adding the DDR3 memory setup "
` [U-Boot] [PATCH 7/9] EXYNOS5: CLOCK: Modify MPLL clock out "
` [U-Boot] [PATCH 8/9] EXYNOS5 : Modify pinnumx settings as per "
` [U-Boot] [PATCH 9/9] SMDK5250: Enable UART and MMC for "
[U-Boot] [PATCH v2 0/7] feature additions and fixes for da850/omap-l138
2012-06-20 10:31 UTC (6+ messages)
` [U-Boot] [PATCH v2 3/7] da850/omap-l138: Add support to read u-boot image from MMC/SD
[U-Boot] [PATCH 0/8 V4] EXYNOS5: Enable I2C support
2012-06-20 9:43 UTC (15+ messages)
` [U-Boot] [PATCH 1/8 V4] EXYNOS: CLK: Add i2c clock
` [U-Boot] [PATCH 2/8 V4] EXYNOS: Add I2C base address
` [U-Boot] [PATCH 3/8 V4] EXYNOS: PINMUX: Add pinmux support for I2C
` [U-Boot] [PATCH 4/8 V4] I2C: Move struct s3c24x0_i2c to a common place
` [U-Boot] [PATCH 5/8 V4] I2C: S3C24X0: Add offset to calculate next i2c channel base address
` [U-Boot] [PATCH 6/8 V4] I2C: Modify the I2C driver for EXYNOS5
` [U-Boot] [PATCH 7/8 V4] I2C: Add support for Multi channel
` [U-Boot] [PATCH 8/8 V4] CONFIG: SMDK5250: I2C: Enable I2C
[U-Boot] [PATCH v3 1/1] tegra: usb: Fix device enumeration problem of USB1
2012-06-20 9:15 UTC
[U-Boot] [PATCH] fix IDE_BUS(dev) macro
2012-06-20 8:05 UTC (8+ messages)
[U-Boot] [PATCH] EXYNOS: PINMUX: modify the gpio function value for mmc
2012-06-20 8:01 UTC (3+ messages)
[U-Boot] [PATCH] EXYNOS5: GPIO: fix wrong gpio bank offset
2012-06-20 7:59 UTC
[U-Boot] Relocation issue on armv7 targets
2012-06-20 3:38 UTC (3+ messages)
[U-Boot] [PATCH v2 1/1] tegra: usb: Fix device enumeration problem of USB1
2012-06-19 21:16 UTC (3+ messages)
[U-Boot] [PATCH] mx28evk: Fix boot by adjusting HW_DRAM_CTL29 register
2012-06-19 21:12 UTC (2+ messages)
[U-Boot] [PATCH 0/2] patman: Various fixes
2012-06-19 20:52 UTC (5+ messages)
` [U-Boot] [PATCH 1/2] patman: Change the location of patman config file
` [U-Boot] [PATCH 2/2] patman: Handle creation "
[U-Boot] [PATCH] lmb: do not export anything without CONFIG_LMB
2012-06-19 20:35 UTC (2+ messages)
[U-Boot] [PATCH 1/2] easylogo: add lzma support
2012-06-19 20:34 UTC (2+ messages)
[U-Boot] [PATCH 1/3] cmd_mem: replace custom PRINTF() with debug()
2012-06-19 20:32 UTC (6+ messages)
` [U-Boot] [PATCH 2/3] cmd_mem: cmp: unify size code paths
` [U-Boot] [PATCH 3/3] cmd_mem: cmp: convert while() to for() loop
[U-Boot] [PATCH 0/6] further updates for keymile powerpc 83xx boards
2012-06-19 20:22 UTC (4+ messages)
` [U-Boot] [GIT PULL] u-boot-mpc83xx: keymile boards updates
[U-Boot] Pull request: nand flash
2012-06-19 20:12 UTC (2+ messages)
[U-Boot] splash screen on uboot 1.3.4
2012-06-19 15:48 UTC (2+ messages)
[U-Boot] [PATCH 01/11 v2] snowball: Add support for ux500 based snowball board
2012-06-19 15:33 UTC (4+ messages)
` [U-Boot] [PATCH 03/11 v2] snowball: Adding architecture dependent initialisation
` [U-Boot] [PATCH 06/11 v2] snowball: applying power to LAN and GBF controllers
` [U-Boot] [PATCH 10/11 v2] armv7: Adding cpu specific cache managmenent
[U-Boot] u-boot on c6x CPU ( texas instruments c6000 )
2012-06-19 15:33 UTC (3+ messages)
[U-Boot] [PATCH] ARM: support for cache coherent allocations
2012-06-19 14:32 UTC (5+ messages)
[U-Boot] USB DFU support into mailline
2012-06-19 14:27 UTC (8+ messages)
[U-Boot] [PATCH 0/8 V2] EXYNOS5: Enable I2C support
2012-06-19 7:30 UTC (10+ messages)
` [U-Boot] [PATCH 6/8 V2] I2C: Modify the I2C driver for EXYNOS5
` [U-Boot] [PATCH 7/8 V2] I2C: Add support for Multi channel
[U-Boot] [PATCH] i.MX28: Add function to adjust memory parameters
2012-06-19 7:29 UTC (11+ messages)
[U-Boot] [PATCH 0/8 V3] EXYNOS5: Enable I2C support
2012-06-19 6:45 UTC (9+ messages)
` [U-Boot] [PATCH 1/8 V3] EXYNOS: CLK: Add i2c clock
` [U-Boot] [PATCH 2/8 V3] EXYNOS: Add I2C base address
` [U-Boot] [PATCH 3/8 V3] EXYNOS: PINMUX: Add pinmux support for I2C
` [U-Boot] [PATCH 4/8 V3] I2C: Move struct s3c24x0_i2c to a common place
` [U-Boot] [PATCH 5/8 V3] I2C: S3C24X0: Add offset to calculate next i2c channel base address
` [U-Boot] [PATCH 6/8 V3] I2C: Modify the I2C driver for EXYNOS5
` [U-Boot] [PATCH 7/8 V3] I2C: Add support for Multi channel
` [U-Boot] [PATCH 8/8 V3] CONFIG: SMDK5250: I2C: Enable I2C
[U-Boot] [PATCH] config.mk:Update DBGFLAGS with dwarf information
2012-06-19 5:08 UTC (4+ messages)
[U-Boot] [PATCH] powerpc/mpc83xx: fix copyright string in serdes.c
2012-06-19 0:11 UTC
[U-Boot] [PATCH 00/11] support for ST-Ericsson snowball board
2012-06-18 22:16 UTC (15+ messages)
` [U-Boot] [PATCH 01/11] snowball: Add support for ux500 based "
` [U-Boot] [PATCH 02/11] u8500: Moving prcmu to cpu directory
` [U-Boot] [PATCH 03/11] snowball: Adding architecture dependent initialisation
` [U-Boot] [PATCH 04/11] snowball: Adding CPU clock initialisation
` [U-Boot] [PATCH 05/11] snowball: Moving to ux500.v2 addess scheme for PRCMU access
` [U-Boot] [PATCH 06/11] snowball: applying power to LAN and GBF controllers
` [U-Boot] [PATCH 07/11] u8500: Moving processor-specific functions to cpu area
` [U-Boot] [PATCH 08/11] u8500: Enabling power to MMC device on AB8500 V2
` [U-Boot] [PATCH 09/11] u8500: Separating mmc config parameters from driver
` [U-Boot] [PATCH 10/11] armv7: Adding cpu specific cache managmenent
` [U-Boot] [PATCH 11/11] snowball: Adding board specific cache cleanup routine
[U-Boot] [PATCH 1/8] arm/davinci: fix DDR2/mDDR memory controller initialization for Omap L138
2012-06-18 20:10 UTC (3+ messages)
` [U-Boot] [PATCH 7/8] arm/davinci: spl - boot device selection
[U-Boot] [PATCH] usb_storage: fix ehci driver max transfer size
2012-06-18 18:57 UTC (2+ messages)
[U-Boot] [PATCH v3] doc: README.mx28_common: Add missing entry into Contents
2012-06-18 18:31 UTC (2+ messages)
[U-Boot] mx53loco: Fix build error when CONFIG_VIDEO is disabled
2012-06-18 18:16 UTC
[U-Boot] mx51evk: Fix build error when CONFIG_VIDEO is disabled
2012-06-18 18:16 UTC
[U-Boot] [PATCH 00/11] support for ST-Ericsson snowball board
2012-06-18 16:25 UTC (12+ messages)
` [U-Boot] [PATCH 01/11] snowball: Add support for ux500 based "
` [U-Boot] [PATCH 02/11] u8500: Moving prcmu to cpu directory
` [U-Boot] [PATCH 03/11] snowball: Adding architecture dependent initialisation
` [U-Boot] [PATCH 04/11] snowball: Adding CPU clock initialisation
` [U-Boot] [PATCH 05/11] snowball: Moving to ux500.v2 addess scheme for PRCMU access
` [U-Boot] [PATCH 06/11] snowball: applying power to LAN and GBF controllers
` [U-Boot] [PATCH 07/11] u8500: Moving processor-specific functions to cpu area
` [U-Boot] [PATCH 08/11] u8500: Enabling power to MMC device on AB8500 V2
` [U-Boot] [PATCH 09/11] u8500: Separating mmc config parameters from driver
` [U-Boot] [PATCH 10/11] armv7: Adding cpu specific cache managmenent
` [U-Boot] [PATCH 11/11] snowball: Adding board specific cache cleanup routine
[U-Boot] [PATCH v2] doc: README.mx28_common: Add missing entry into Contents
2012-06-18 15:42 UTC
[U-Boot] [PATCH] doc: README.mx28_common: Add missing entry into Contents
2012-06-18 15:37 UTC (2+ messages)
[U-Boot] [PATCH 0/4] USB and cache related fixes
2012-06-18 15:23 UTC (10+ messages)
` [U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions
[U-Boot] [U-Boot-Users] Secure Bootloader patch
2012-06-18 10:39 UTC (2+ messages)
[U-Boot] please pull u-boot-samsung/master
2012-06-18 8:50 UTC
[U-Boot] [PATCH v4] tx25: Use generic gpio_* calls
2012-06-18 7:11 UTC (3+ messages)
[U-Boot] Acccessing IRAM in MX53
2012-06-18 4:37 UTC (3+ messages)
[U-Boot] [PATCH 1/2] ARM: add basic support for the Broadcom BCM2835 SoC
2012-06-18 3:54 UTC (5+ messages)
` [U-Boot] [PATCH 2/2] ARM: bcm2835: add Raspberry Pi model B board
[U-Boot] [PATCH 0/3] i.MX refactoring patchset
2012-06-17 21:54 UTC (32+ messages)
` [U-Boot] [PATCH 1/3] imx: Use a clear identification of an unidentified CPU type
` [U-Boot] [PATCH 2/3] mxs: generalize code for print_cpuinfo()
` [U-Boot] [PATCH 3/3] mx28evk: extend default environment
[U-Boot] Environement in NVRAM
2012-06-17 21:53 UTC (2+ messages)
[U-Boot] [PATCH 0/8] EXT2 cleanup
2012-06-17 15:12 UTC (2+ messages)
[U-Boot] [PATCH] mx6: Make pad name macro consistent with the datasheet
2012-06-15 22:22 UTC (2+ messages)
[U-Boot] [PATCH 0/6] updates for keymile powerpc83xx boards
2012-06-15 21:48 UTC (4+ messages)
` [U-Boot] [PATCH 1/6] powerpc/83xx/km: use tuxx1.h for kmsupx5 target
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox