messages from 2012-07-31 18:10:06 to 2012-08-02 15:52:52 UTC [more...]
[U-Boot] [PATCH 0/7] dfu:usb: Composite USB download gadget with DFU function
2012-08-02 15:52 UTC (23+ messages)
` [U-Boot] [PATCH v3 0/7] dfu:usb: DFU support via USB Download gadget
` [U-Boot] [PATCH v3 1/7] dfu:usb: Support for g_dnl composite download gadget
` [U-Boot] [PATCH v3 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget
` [U-Boot] [PATCH v3 3/7] dfu: DFU backend implementation
` [U-Boot] [PATCH v3 4/7] dfu: MMC specific routines for DFU operation
` [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command
[U-Boot] Problem booting linux kernel due to garbled available machine support
2012-08-02 15:33 UTC
[U-Boot] [PATCH 0/7 V4] EXYNOS5: Enable SPI support
2012-08-02 15:19 UTC (10+ messages)
` [U-Boot] [PATCH 1/7 V4] EXYNOS5: Add pinmux support for SPI
` [U-Boot] [PATCH 2/7 V4] SPI: Add W25Q32 to Winbond SPI flash table
` [U-Boot] [PATCH 3/7 V4] EXYNOS: Add clock for SPI
` [U-Boot] [PATCH 4/7 V4] EXYNOS5: Add base address "
` [U-Boot] [PATCH 5/7 V4] SPI: Add SPI Driver for EXYNOS
` [U-Boot] [PATCH 6/7 V4] EXYNOS5: Enable SPI
` [U-Boot] [PATCH 7/7] EXYNOS5: Enable SPI booting
[U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards
2012-08-02 14:14 UTC (11+ messages)
` [U-Boot] [PATCHv3] "
` [U-Boot] [PATCH] Enable the EMAC clock in at91_macb_hw_init()
` [U-Boot] [PATCHv2] at91: Add support for taskit AT91SAM9G20 boards
[U-Boot] [PATCH v5] Corrupted NAND Flash access on KARO TX25 modules
2012-08-02 13:55 UTC (3+ messages)
[U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash
2012-08-02 13:07 UTC (9+ messages)
[U-Boot] [PATCH 1/2] GPIO: Extend the cmd_gpio API by gpio_{from, to}_string()
2012-08-02 10:05 UTC (4+ messages)
[U-Boot] [PATCH 0/7] km82xx and mgcogeXxx reworking
2012-08-02 9:14 UTC (20+ messages)
` [U-Boot] [PATCH 1/7] powerpc/82xx: remove unused define for mgcoge3ne
` [U-Boot] [PATCH 2/7] powerpc/82xx: move mgcoge, mgcoge3ne defines to ease subsequent merge
` [U-Boot] [PATCH v2 4/7] powerpc/82xx: move km/km82xx-common.h within km82xx.h
` [U-Boot] [PATCH 3/7] powerpc/82xx: merge mgcoge.h and mgcoge3ne.h into km82xx.h
` [U-Boot] [PATCH 4/7] powerpc/82xx: move km/km82xx-common.h within km82xx.h
` [U-Boot] [PATCH 5/7] powerpc/82xx: add SDRAM detection for km82xx
` [U-Boot] [PATCH 6/7] powerpc/82xx: use SDRAM detection for mgcoge2ne
` [U-Boot] [PATCH 7/7] powerpc/82xx: adapt SDRAM settings for mgcoge3ne
[U-Boot] [PATCH] mx6q: mx6qsabrelite: add GPIO_0__CCM_CLKO and GPIO_3__CCM_CLKO2 pin mux
2012-08-02 7:48 UTC (11+ messages)
[U-Boot] add more function in hello_world.c for standalone application
2012-08-02 7:16 UTC
[U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version
2012-08-01 23:01 UTC (11+ messages)
` [U-Boot] [PATCH v4 2/2] arm: work around assembler bug
[U-Boot] [PATCH] doc/git-mailrc: Update 'ti' alias
2012-08-01 22:30 UTC
[U-Boot] [PATCH v2 0/9] enable thumb for tegra20
2012-08-01 22:28 UTC (14+ messages)
` [U-Boot] [PATCH v2 1/9] tools, config.mk: add binutils-version
` [U-Boot] [PATCH v2 2/9] arm: work around assembler bug
` [U-Boot] [PATCH v2 3/9] tegra20: remove inline assembly for u32 cast
` [U-Boot] [PATCH v2 4/9] arm: add _thumb1_case_uqi to libgcc
` [U-Boot] [PATCH v2 5/9] arm: use thumb compatible return in arm720t
` [U-Boot] [PATCH v2 6/9] arm: change arm720t to armv4t
` [U-Boot] [PATCH v2 7/9] arm720t: add linkage macro for relocate_code
` [U-Boot] [PATCH v2 8/9] arm: use thumb interworking returns in libgcc
` [U-Boot] [PATCH v2 9/9] tegra20: enable thumb build
[U-Boot] [PATCH 0/5] light updates of common pci code; some pci ids
2012-08-01 22:27 UTC (6+ messages)
` [U-Boot] [PATCH 1/5] pci: fix errant data types and corresponding access functions
` [U-Boot] [PATCH 2/5] [cosmetic] pci: clean up some whitespace and formatting
` [U-Boot] [PATCH 3/5] pci: minor cleanup of CONFIG_PCI_PNP usage
` [U-Boot] [PATCH 4/5] pci: update pci_ids.h with a few new entries
` [U-Boot] [PATCH 5/5] pci: add CONFIG_PCI_ENUM_ONLY for platforms that don't need PCI setup done
[U-Boot] early_malloc outline
2012-08-01 22:12 UTC (7+ messages)
[U-Boot] [PATCH 1/2] sf: stmicro: support JEDEC standard two-byte signature
2012-08-01 21:24 UTC (5+ messages)
` [U-Boot] [PATCH 2/2] sf: stmicro: add support N25Q128 parts
[U-Boot] [PATCH] MAINTAINERS: fix Andreas Bießmann AVR32 entry
2012-08-01 21:12 UTC
[U-Boot] [PATCH] MAINTAINERS: fix entry of Ilko Iliev
2012-08-01 20:56 UTC
[U-Boot] [PATCH] SPI: Remove superfluous semicolon
2012-08-01 19:09 UTC (3+ messages)
[U-Boot] [U-BOOT]: Add support for numonyx spi flash
2012-08-01 17:55 UTC (2+ messages)
[U-Boot] [PATCH] net: Improve the speed of netconsole
2012-08-01 16:42 UTC (5+ messages)
[U-Boot] [PATCH] net: Make netconsole src and dest ports configurable
2012-08-01 16:34 UTC (3+ messages)
` [U-Boot] [PATCH v2] "
[U-Boot] [PATCH] net: Make the netconsole buffer size configurable
2012-08-01 16:33 UTC (3+ messages)
` [U-Boot] [PATCH v2] "
[U-Boot] [PATCH 0/7 V3] EXYNOS5: Enable SPI support
2012-08-01 16:32 UTC (11+ messages)
` [U-Boot] [PATCH 1/7 V3] EXYNOS5: Add pinmux support for SPI
` [U-Boot] [PATCH 2/7 V3] SPI: Add W25Q32 to Winbond SPI flash table
` [U-Boot] [PATCH 3/7 V3] EXYNOS: Add clock for SPI
` [U-Boot] [PATCH 4/7 V3] EXYNOS5: Add base address "
` [U-Boot] [PATCH 5/7 V3] SPI: Add SPI Driver for EXYNOS
` [U-Boot] [PATCH 6/7 V3] EXYNOS5: Enable SPI
` [U-Boot] [PATCH 7/7 V3] Enable SPI booting
[U-Boot] [PATCH V2 00/13] Basic Raspberyr Pi support
2012-08-01 16:25 UTC (17+ messages)
` [U-Boot] [PATCH V2 01/13] README: fix references to config_cmd_default.h
` [U-Boot] [PATCH V2 02/13] ARM: add basic support for the Broadcom BCM2835 SoC
` [U-Boot] [PATCH V2 03/13] ARM: bcm2835: add Raspberry Pi model B board
` [U-Boot] [PATCH V2 04/13] ARM: arm1176: enable instruction cache in arch_cpu_init()
` [U-Boot] [PATCH V2 05/13] ARM: rpi_b: enable CONFIG_ARCH_CPU_INIT for icache
` [U-Boot] [PATCH V2 06/13] ARM: rpi_b: define CONFIG_MACH_TYPE
` [U-Boot] [PATCH V2 07/13] ARM: rpi_b: include config_cmd_default.h
` [U-Boot] [PATCH V2 08/13] ARM: rpi_b: enable booting the Linux kernel
` [U-Boot] [PATCH V2 09/13] ARM: rpi_b: drop RAM size to 128M
` [U-Boot] [PATCH V2 10/13] ARM: rpi_b: move stack to top of RAM
` [U-Boot] [PATCH V2 11/13] ARM: bcm2835: implement reset using watchdog
` [U-Boot] [PATCH V2 12/13] gpio: bcm2835: Add GPIO driver
` [U-Boot] [PATCH V2 13/13] rbpi: Add BCM2835 GPIO driver for raspberry pi
[U-Boot] Merging the pogo_e02 and sheevaplug code
2012-08-01 15:42 UTC
[U-Boot] [V2] arm: Fixed the offset for the no relocation
2012-08-01 15:03 UTC
[U-Boot] [PATCH] arm: Fixed the offset for the no relocation
2012-08-01 14:54 UTC (2+ messages)
[U-Boot] Problem with PCIexpress switch
2012-08-01 14:24 UTC
[U-Boot] V3: S3c64xx: Switch all I/O to use readl/writel functio and Clear variable
2012-08-01 14:20 UTC (4+ messages)
` [U-Boot] [V3 09/15] arm1176: Fixed No relocation
[U-Boot] [PATCH] MX28: Add SchulerControl SC_SPS_1 platform
2012-08-01 13:42 UTC (2+ messages)
[U-Boot] [PATCH 1/4] MX28: Fix up the MMC driver DMA mode
2012-08-01 13:11 UTC (2+ messages)
[U-Boot] [PATCH v4] arm : Atmel : add at91sam9x5ek board support
2012-08-01 12:42 UTC (5+ messages)
[U-Boot] [PATCH] doc/git-mailrc: update at91 and avr32
2012-08-01 12:41 UTC (4+ messages)
[U-Boot] List of offending drivers
2012-08-01 10:11 UTC (2+ messages)
` [U-Boot] [U-Boot-DM] "
[U-Boot] [PATCH] lsxl: support power switch
2012-08-01 7:28 UTC (5+ messages)
[U-Boot] [PATCH v2 0/4] DaVinci DA8xx: tidy up clock IDs
2012-08-01 5:24 UTC (2+ messages)
[U-Boot] sh4 sti7109 for mb442 motherboards
2012-08-01 5:17 UTC
[U-Boot] [PATCH v3 0/2] Add GPIO driver for BCM2835 SoC
2012-08-01 4:22 UTC (5+ messages)
` [U-Boot] [PATCH v3 1/2] gpio: bcm2835: Add GPIO driver
[U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
2012-08-01 2:41 UTC (3+ messages)
[U-Boot] [PATCH] mx53loco: Define CONFIG_BOARD_LATE_INIT
2012-07-31 21:20 UTC (8+ messages)
[U-Boot] [PATCH] mx28evk: Turn on caches
2012-07-31 21:16 UTC (2+ messages)
[U-Boot] [PATCH 0/5]: Further update am33xx support
2012-07-31 21:07 UTC (6+ messages)
` [U-Boot] [PATCH 1/5] am33xx: Enable gpio0 clock
` [U-Boot] [PATCH 2/5] am33xx: Remove board/ti/am335x/evm.c
` [U-Boot] [PATCH 3/5] am33xx: Add support for TI AM335x StarterKit EVM
` [U-Boot] [PATCH 4/5] am33xx evm: Add CONFIG_CMD_EEPROM and related
` [U-Boot] [PATCH 5/5] am33xx: Rework pinmux functions
[U-Boot] [PATCH 0/17]: Improve am33xx support
2012-07-31 20:57 UTC (8+ messages)
` [U-Boot] [PATCH 01/17] omap3/omap4/omap5/am33xx: Use a common running_from_sdram function
[U-Boot] [PATCH] SMDK6400: Add MAINTAINERS entry
2012-07-31 20:29 UTC (2+ messages)
[U-Boot] [i2c] Pull request
2012-07-31 20:14 UTC (2+ messages)
[U-Boot] Pull request - microblaze
2012-07-31 20:07 UTC (8+ messages)
` [U-Boot] Pull request v2 "
[U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
2012-07-31 20:01 UTC (2+ messages)
[U-Boot] Pull request u-boot-blackfin.git (sf branch)
2012-07-31 19:53 UTC (2+ messages)
[U-Boot] mx53loco hangs on 2012.07
2012-07-31 19:15 UTC (3+ messages)
[U-Boot] [PATCH 00/11] Support for ST-Ericsson snowball board
2012-07-31 18:59 UTC (12+ messages)
` [U-Boot] [PATCH 01/11] snowball: Add support for ux500 based "
` [U-Boot] [PATCH 02/11] u8500: Moving prcmu to cpu directory
` [U-Boot] [PATCH 03/11] snowball: Adding architecture dependent initialisation
` [U-Boot] [PATCH 04/11] snowball: Adding CPU clock initialisation
` [U-Boot] [PATCH 05/11] snowball: Moving to ux500.v2 addess scheme for PRCMU access
` [U-Boot] [PATCH 06/11] snowball: applying power to LAN and GBF controllers
` [U-Boot] [PATCH 07/11] u8500: Moving processor-specific functions to cpu area
` [U-Boot] [PATCH 08/11] u8500: Enabling power to MMC device on AB8500 V2
` [U-Boot] [PATCH 09/11] u8500: Separating mmc config parameters from driver
` [U-Boot] [PATCH 10/11] armv7: Adding cpu specific cache managmenent
` [U-Boot] [PATCH 11/11] snowball: Adding board specific cache cleanup routine
[U-Boot] multiple definition of `reloc_dst'
2012-07-31 18:50 UTC
[U-Boot] multiple definition of `reloc_dst'
2012-07-31 18:17 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox