messages from 2013-01-29 19:19:34 to 2013-01-31 16:29:58 UTC [more...]
[U-Boot] [PATCH 0/7] ARM: OMAP4+: Cleanup clocks, control and emif code
2013-01-31 16:29 UTC (9+ messages)
` [U-Boot] [PATCH 1/7] ARM: OMAP4+: emif: Detect SDRAM from SDRAM config register
` [U-Boot] [PATCH 2/7] ARM: OMAP4+: Change the PRCM structure prototype common for all Socs
` [U-Boot] [PATCH 3/7] ARM: OMAP4+: Cleanup the clocks layer
` [U-Boot] [PATCH 4/7] ARM: OMAP4+: Clean up the pmic code
` [U-Boot] [PATCH 5/7] ARM: OMAP4+: Cleanup emif specific files
` [U-Boot] [PATCH 6/7] ARM: OMAP4+: Make control module register structure generic
` [U-Boot] [PATCH 7/7] ARM: OMAP5: Clean up iosettings code
[U-Boot] [PATCH] vfat: Fix mkcksum argument sizes
2013-01-31 15:34 UTC (2+ messages)
[U-Boot] [PATCH] arm: fix bug on relocation address
2013-01-31 14:29 UTC
[U-Boot] anyone implemented a failsafe upgrade involving two kernel/rootfs pairs?
2013-01-31 14:27 UTC (3+ messages)
[U-Boot] [PATCH] env: Allow accessing non-mtd devices
2013-01-31 14:10 UTC (4+ messages)
[U-Boot] [U-boot] mkimage -F parameter
2013-01-31 13:55 UTC (2+ messages)
[U-Boot] [PATCH] fw_env.config: Correct "fw_saveenv" to "fw_setenv"
2013-01-31 12:06 UTC
[U-Boot] [PATCH] mmc: support the correct card version for eMMC
2013-01-31 11:55 UTC (2+ messages)
[U-Boot] [PATCH] MIPS: start.S: unify and simplify reset vector handling
2013-01-31 10:35 UTC (2+ messages)
[U-Boot] Virtex 4 with XMD
2013-01-31 10:33 UTC (3+ messages)
[U-Boot] [PATCH] MIPS: start.S: remove obsolete 64 bit handling in setup_c0_status
2013-01-31 10:01 UTC (2+ messages)
[U-Boot] [PATCH 0/7] omap mmc: implement card detect and write protection
2013-01-31 7:44 UTC (4+ messages)
[U-Boot] [PATCH V3 0/7] Add splash screen for CM-T35
2013-01-31 7:40 UTC (8+ messages)
` [U-Boot] [PATCH V3 1/7] omap3: add useful dss defines
` [U-Boot] [PATCH V3 2/7] omap3: allow dynamic selection of gfx_format
` [U-Boot] [PATCH V2 3/7] lcd: prevent unaligned memory access when displaying splash screen
` [U-Boot] [PATCH V1 4/7] lcd: add option for board specific splash screen preparation
` [U-Boot] [PATCH V3 5/7] cm-t35: add support for dvi displays
` [U-Boot] [PATCH V2 6/7] cm-t35: add support for user defined lcd parameters
` [U-Boot] [PATCH V2 7/7] cm-t35: add support for loading splash image from NAND
[U-Boot] [PATCH] serial/ns16550: don't generate functions for undefined ports
2013-01-31 7:24 UTC (2+ messages)
[U-Boot] [PATCH 0/5] ARM: OMAP5: Add support for OMAP543x ES2.0 Socs
2013-01-31 6:02 UTC (6+ messages)
` [U-Boot] [PATCH 1/5] ARM: OMAP5: Add silicon id support for ES2.0 revision
` [U-Boot] [PATCH 2/5] ARM: OMAP5: clock: Add the prcm register changes required for ES2.0
` [U-Boot] [PATCH 3/5] ARM: OMAP5: clocks: Add OPP settings required for OMAP543X ES2.0 soc
` [U-Boot] [PATCH 4/5] ARM: OMAP5: Add DDR changes required for OMAP543X ES2.0 SOCs
` [U-Boot] [PATCH 5/5] ARM: OMAP5: srcomp: enable slew rate compensation cells after powerup
[U-Boot] [PATCH] powerpc/mpc85xx: add setting of clock-frequency for mpic node
2013-01-31 4:51 UTC
[U-Boot] [PATCH] mmc: check the revision for sd3.0
2013-01-31 4:02 UTC (2+ messages)
[U-Boot] MMC - Error detected in status(0x208100)!
2013-01-31 2:44 UTC (4+ messages)
[U-Boot] [PATCH v2] arm: fix CONFIG_DELAY_ENVIRONMENT to act like it claims in the README
2013-01-31 0:34 UTC (7+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [GIT PULL] u-boot-mips/master
2013-01-31 0:30 UTC (2+ messages)
[U-Boot] [PATCH v2 0/7] MIPS: use an unified u-boot.lds script
2013-01-30 23:50 UTC (2+ messages)
[U-Boot] [PATCH] MIPS: remove OUTPUT_FORMAT from linker scripts
2013-01-30 23:50 UTC (2+ messages)
[U-Boot] [PATCH] MIPS: xburst: simplify relocation offset calculation
2013-01-30 23:50 UTC (2+ messages)
[U-Boot] [PATCH v2] MIPS: simplify relocated _G_O_T_ address calculation
2013-01-30 23:50 UTC (2+ messages)
[U-Boot] [RFC Patch v6] Consolidate bool type
2013-01-30 23:24 UTC (8+ messages)
[U-Boot] Please pull u-boot-mpc85xx.git
2013-01-30 23:23 UTC (3+ messages)
[U-Boot] [Patch v7] Consolidate bool type
2013-01-30 23:11 UTC
[U-Boot] [PATCH 1/6] imx: mx6q DDR3 init: Fix tMRD
2013-01-30 21:19 UTC (6+ messages)
` [U-Boot] [PATCH 2/6] imx: mx6q DDR3 init: Fix tXPR
` [U-Boot] [PATCH 3/6] imx: mx6q DDR3 init: Fix SDE_to_RST
` [U-Boot] [PATCH 4/6] imx: mx6q DDR3 init: Fix RST_to_CKE
` [U-Boot] [PATCH 5/6] imx: mx6q DDR3 init: Fix MR0.PPD
` [U-Boot] [PATCH 6/6] imx: mx6q DDR3 init: Benefit from available CL = 7
[U-Boot] memory block device?
2013-01-30 18:59 UTC (2+ messages)
[U-Boot] [PATCH 0/10] mx23/mxs pending patches
2013-01-30 18:14 UTC (41+ messages)
` [U-Boot] [PATCH 01/10] mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to CONFIG_SPL_MXS_PSWITCH_WAIT
` [U-Boot] [PATCH 02/10] mx23: Document the tRAS lockout setting in memory initialization
` [U-Boot] [PATCH 03/10] mx23evk: Adjust DRAM control register to use full 128MB of RAM
` [U-Boot] [PATCH 04/10] led: Use STATUS_LED_ON and STATUS_LED_OFF when calling __led_set
` [U-Boot] [PATCH 05/10] mxs: Fix iomux.h to not break build during assembly stage
` [U-Boot] [PATCH 06/10] mx23_olinuxino: Add support for status LED
` [U-Boot] [PATCH 07/10] usb: mxs: Disable USB Port 1 for i.MX23
` [U-Boot] [PATCH 08/10] mx23evk: Enable USB support
` [U-Boot] [PATCH 09/10] mx23_olinuxino: "
` [U-Boot] [PATCH 10/10] mx23_olinuxino: Add ethernet support
[U-Boot] [RFC] Add Nitrogen6x support
2013-01-30 18:10 UTC (2+ messages)
` [U-Boot] [RFC PATCH] Add support for Boundary Devices Nitrogen6x boards
[U-Boot] How to boot split kernel/image of jffs2 partition?
2013-01-30 17:40 UTC
[U-Boot] CONFIG_DELAY_ENVIRONMENT usage
2013-01-30 17:37 UTC (3+ messages)
[U-Boot] [PATCH 0/2] Add I2C driver for Tegra114 Dalmore
2013-01-30 15:20 UTC (13+ messages)
` [U-Boot] [PATCH 1/2] Tegra114: fdt: Update DT files with I2C info for T114/Dalmore
` [U-Boot] [PATCH 2/2] Tegra114: I2C: Enable I2C driver on Dalmore E1611 eval board
[U-Boot] can i in u-boot partition a device and format it in fat ?
2013-01-30 15:07 UTC (2+ messages)
[U-Boot] [PATCH v2 0/7] MIPS: use an unified u-boot.lds script
2013-01-30 15:05 UTC (10+ messages)
` [U-Boot] [PATCH v2 1/7] MIPS: add unified u-boot.lds file
` [U-Boot] [PATCH v2 2/7] MIPS: qemu-mips: use the unified u-boot.lds script
` [U-Boot] [PATCH v2 3/7] MIPS: pb1x00: remove custom "
` [U-Boot] [PATCH v2 4/7] MIPS: vct: "
` [U-Boot] [PATCH v2 5/7] MIPS: incaip: "
` [U-Boot] [PATCH v2 6/7] MIPS: dbau1x00: "
` [U-Boot] [PATCH v2 7/7] MIPS: qi_lb60: "
[U-Boot] [PATCH 1/4] board: xilinx: Remove unused ancient i2c driver
2013-01-30 14:10 UTC (7+ messages)
` [U-Boot] [PATCH 2/4] board: xilinx: Remove common folder
` [U-Boot] [PATCH 3/4] common: cmd_bdinfo: Fix compilation warning for microblaze
[U-Boot] Help : Marvell SDIO/MMC driver for Sheevaplug
2013-01-30 13:06 UTC (2+ messages)
[U-Boot] [PATCH] PHY: micrel.c: add support for KSZ9031
2013-01-30 12:54 UTC
[U-Boot] [PATCH V2 0/7] Add splash screen for CM-T35
2013-01-30 8:08 UTC (7+ messages)
` [U-Boot] [PATCH V2 6/7] cm-t35: add support for user defined lcd parameters
` [U-Boot] [PATCH V2 7/7] cm-t35: add support for loading splash image from NAND
[U-Boot] Watchdog of OMAP3530 in u-boot
2013-01-30 5:53 UTC
[U-Boot] [PATCH] mmc:sdhci:fix: Change default interrupts enabled at SDHCI initialization
2013-01-30 4:52 UTC (3+ messages)
[U-Boot] [PATCH] powerpc/corenet: Add workaround for ELBC multi-bit ECC error
2013-01-30 2:47 UTC (3+ messages)
[U-Boot] [PATCH V5 REPOST 2 1/7] ARM: bcm2835: add mailbox driver
2013-01-30 2:37 UTC (7+ messages)
` [U-Boot] [PATCH V5 REPOST 2 2/7] ARM: rpi_b: use bcm2835 mbox driver to get memory size
` [U-Boot] [PATCH V5 REPOST 2 3/7] lcd: calculate line_length after lcd_ctrl_init()
` [U-Boot] [PATCH V5 REPOST 2 4/7] ARM: rpi_b: disable rpi_b dcache explicitly
` [U-Boot] [PATCH V5 REPOST 2 5/7] video: add a driver for the bcm2835
` [U-Boot] [PATCH V5 REPOST 2 6/7] mmc: add bcm2835 driver
` [U-Boot] [PATCH V5 REPOST 2 7/7] ARM: rpi_b: enable SD controller, add related env/cmds
[U-Boot] [PATCH v2] MAKEALL: add support for per architecture toolchains
2013-01-30 2:20 UTC (2+ messages)
[U-Boot] [PATCH] ARM: atmel: add at91sam9g20ek_2mmc nand boot support
2013-01-30 1:43 UTC
[U-Boot] Can I read env from RAM in uboot script?
2013-01-30 1:20 UTC (9+ messages)
[U-Boot] [PATCH v4 0/7] tegra: SPI drivers
2013-01-30 0:15 UTC (10+ messages)
` [U-Boot] [PATCH v4 1/7] tegra20: fdt: add SPI SFLASH node
` [U-Boot] [PATCH v4 2/7] tegra: spi: add fdt support to tegra SPI SFLASH driver
` [U-Boot] [PATCH v4 3/7] tegra30: add SBC1 to periph id mapping table
` [U-Boot] [PATCH v4 4/7] tegra30: fdt: add SPI SLINK nodes
` [U-Boot] [PATCH v4 5/7] tegra: add addresses of SPI SLINK controllers
` [U-Boot] [PATCH v4 6/7] tegra: add SPI SLINK driver
` [U-Boot] [PATCH v4 7/7] tegra: cardhu: config: enable SPI
[U-Boot] MX23 patches
2013-01-29 23:28 UTC (4+ messages)
[U-Boot] [PULL] : Please pull u-boot-i2c
2013-01-29 22:15 UTC (2+ messages)
[U-Boot] [GIT PULL] u-boot-mpc83xx: support for new SPL
2013-01-29 22:15 UTC (2+ messages)
` [U-Boot] [U-Boot,GIT,PULL] "
[U-Boot] [PATCH 1/7] MIPS: add unified u-boot.lds file
2013-01-29 20:50 UTC (4+ messages)
[U-Boot] [PATCH 0/2] Davinci: MAC address updates
2013-01-29 20:31 UTC (3+ messages)
` [U-Boot] [PATCH 1/2] Davinci: Make MAC address offset in EEPROM configurable, CONFIG_MAC_EEPROM_ADDR
[U-Boot] [PATCH] am335x: NAND: add BCH16 and 4k page size support
2013-01-29 20:01 UTC (3+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox