messages from 2013-03-25 17:39:27 to 2013-03-27 10:52:32 UTC [more...]
[U-Boot] [PATCH 1/1] USB: EHCI: Add weak functions to support new chip
2013-03-27 10:52 UTC
[U-Boot] [PATCH] EXYNOS: SPL: Add a custom spi copy function
2013-03-27 10:28 UTC
[U-Boot] [PATCH v7] mtd: cfi_flash: Fix CFI flash driver for 8-bit bus support
2013-03-27 10:22 UTC
[U-Boot] [PATCH v2 0/3] Make tzpc initialization common for exynos4 and exynos5
2013-03-27 10:22 UTC (3+ messages)
[U-Boot] [PATCH 0/7] usb: ss: Some fixes and cleanup for USB super-speed support
2013-03-27 9:29 UTC (8+ messages)
` [U-Boot] [PATCH 1/7] USB: Some cleanup prior to USB 3.0 interface addition
` [U-Boot] [PATCH 2/7] usb: hub: Conditionally power on usb's root-hub ports
` [U-Boot] [PATCH 3/7] usb: Update device class in usb device's descriptor
` [U-Boot] [PATCH 4/7] usb: hub: Fix enumration timeout
` [U-Boot] [PATCH 5/7] usb: hub: Increase device enumeration timeout for broken drives
` [U-Boot] [PATCH 6/7] USB: SS: Add support for Super Speed USB interface
` [U-Boot] [PATCH 7/7] usb: eth: Fix for updated usb interface descriptor structure
[U-Boot] Beagleboard: SPL hangs on serial init
2013-03-27 9:29 UTC (7+ messages)
` [U-Boot] [PATCH 1/1 v2] omap3_beagle: Enabling UART3 first allows the Transmitter to be empty
[U-Boot] [PATCH] Exynos5: clock: Update the equation to calculate PLL output frequency
2013-03-27 8:58 UTC
[U-Boot] [PATCH] mx6: Fix the reading of CPU revision
2013-03-27 8:57 UTC (6+ messages)
[U-Boot] [PATCH] spl: exynos: make spl_boot common for all exynos based platforms
2013-03-27 8:48 UTC (2+ messages)
[U-Boot] [PATCH] powerpc/tools/pblimage: use SYS_TEXT_BASE instead of hardcoded value
2013-03-27 8:39 UTC
[U-Boot] Displaying characters on the display in u-boot
2013-03-27 8:27 UTC
[U-Boot] [PATCH 0/4] EXYNOS5: Enable dwmmc
2013-03-27 8:01 UTC (10+ messages)
` [U-Boot] [PATCH 1/4] MMC: DWMMC: Modified fifo size computation
` [U-Boot] [PATCH 2/4] MMC: EXYNOS: Added call back function for clock get
[U-Boot] [PATCH] EXYNOS5: Add L2 Cache Support
2013-03-27 8:00 UTC (2+ messages)
[U-Boot] [PATCH 0/2 V2] EXYNOS5: Enable Gigabyte device GD25LQ and GD25Q64B
2013-03-27 6:38 UTC (4+ messages)
[U-Boot] [PATCH 0/3] Add Arndale board support
2013-03-27 6:04 UTC (8+ messages)
` [U-Boot] [PATCH 1/3] exynos5250: remove redundant SPI related configs
` [U-Boot] [PATCH 2/3] exynos5250: move board specific configs to board specific config file
` [U-Boot] [PATCH 3/3] exynos5250: Add arndale board support
[U-Boot] [PATCH] arm: omap: emif: Support for ddr3 after warm reset
2013-03-27 5:43 UTC (3+ messages)
[U-Boot] [PATCH V3 00/10] OMAP3-5: TWL[46]03[05]: cleanup register access and misc minimal cleanups
2013-03-27 4:17 UTC (12+ messages)
` [U-Boot] [PATCH V3 01/10] twl4030: make twl4030_i2c_write_u8 prototype consistent
` [U-Boot] [PATCH V3 02/10] twl4030: make twl4030_i2c_read_u8 "
` [U-Boot] [PATCH V3 03/10] twl6030: twl6030_i2c_[read|write]_u8 "
` [U-Boot] [PATCH V3 04/10] twl6030: move twl6030 register access functions to common header file
` [U-Boot] [PATCH V3 05/10] twl6030: add header guard
` [U-Boot] [PATCH V3 06/10] twl6035: rename to palmas
` [U-Boot] [PATCH V3 07/10] palmas: rename init_settings to an generic palmas init
` [U-Boot] [PATCH V3 08/10] palmas: rename twl6035_mmc1_poweron_ldo with an palmas generic function
` [U-Boot] [PATCH V3 09/10] palmas: use palmas_i2c_[read|write]_u8
` [U-Boot] [PATCH V3 10/10] palmas: add header guard
[U-Boot] [PATCH 1/3] arm:goni: Adjustment of configuration for goni target
2013-03-27 2:46 UTC (4+ messages)
` [U-Boot] [PATCH 3/3] arm:goni: Add support for USB mass storage
[U-Boot] [PATCH v2 0/7] Various patman fixes
2013-03-26 23:09 UTC (8+ messages)
` [U-Boot] [PATCH v2 1/7] patman: Fix up checkpatch parsing to deal with 'CHECK' lines
` [U-Boot] [PATCH v2 2/7] patman: Don't allow spaces in tags
` [U-Boot] [PATCH v2 3/7] patman: Fix the comment in CheckTags to mention multiple tags
` [U-Boot] [PATCH v2 4/7] patman: Provide option to ignore bad aliases
` [U-Boot] [PATCH v2 5/7] patman: Add -a option to refrain from test-applying the patches
` [U-Boot] [PATCH v2 6/7] patman: Add Series-process-log tag to sort/uniq change logs
` [U-Boot] [PATCH v2 7/7] patman: Minor help message/README fixes
[U-Boot] [PATCH 0/8] Various patman fixes
2013-03-26 22:46 UTC (13+ messages)
` [U-Boot] [PATCH 1/8] patman: Fix up checkpatch parsing to deal with 'CHECK' lines
` [U-Boot] [PATCH 2/8] patman: Don't look for tags inside quotes
` [U-Boot] [PATCH 5/8] patman: Provide option to ignore bad aliases
` [U-Boot] [PATCH 8/8] patman: Add Series-process-log tag to sort/uniq change logs
[U-Boot] [PATCH 0/5] Add support for using an UBI volume for environment
2013-03-26 21:53 UTC (8+ messages)
` [U-Boot] [PATCH v2 0/6] "
` [U-Boot] [PATCH v2 1/6] ubi: Fix broken cleanup code in attach_by_scanning
` [U-Boot] [PATCH v2 2/6] ubi: Expose a few simple functions from the cmd_ubi
` [U-Boot] [PATCH v2 3/6] ubi: ubifs: Turn off verbose prints
` [U-Boot] [PATCH v2 4/6] mtd: Make mtdparts work with pre-reloc env
` [U-Boot] [PATCH v2 5/6] env: Add support for UBI environment
` [U-Boot] [PATCH v2 6/6] env: Add redundant env support to UBI env
[U-Boot] [PATCH v3 1/7] imx: Homogenize and fix fuse register definitions
2013-03-26 21:24 UTC (7+ messages)
` [U-Boot] [PATCH v3 2/7] imx: Add useful fuse definitions
` [U-Boot] [PATCH v3 3/7] Add fuse API and commands
` [U-Boot] [PATCH v3 4/7] Add fsl_iim driver
` [U-Boot] [PATCH v3 5/7] mpc: iim: Switch to common fsl_iim
` [U-Boot] [PATCH v3 6/7] mx51evk: Enable support for iim
` [U-Boot] [PATCH v3 7/7] imx: Document fuse assignments for MAC addresses
[U-Boot] unaligned access in part_efi.c
2013-03-26 20:42 UTC
[U-Boot] [PATCH 1/2] nitrogen6x: Pass the correct CPU revision to the kernel
2013-03-26 18:06 UTC (12+ messages)
[U-Boot] [PATCH] Tegra: enable verify support for the crc32 command
2013-03-26 17:54 UTC (2+ messages)
[U-Boot] [RFC] Bootcount improvements
2013-03-26 17:10 UTC (3+ messages)
[U-Boot] [PATCH v3 2/4] New command bootmenu: ANSI terminal Boot Menu support
2013-03-26 15:19 UTC (4+ messages)
` [U-Boot] [PATCH v4 2/4] New command bootmenu: ANSI terminal boot menu support
[U-Boot] [PATCH 1/2] mmc: mmc_getcd/getwp: use sensible defaults
2013-03-26 14:54 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] mmc: omap_hsmmc.c: only register getcd/getwp callbacks if gpio could be used
[U-Boot] [PATCH] am335x_evm: Add better timings for the new BeagleBoard DDR3 part
2013-03-26 14:53 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] igep00x0: Enable CONFIG_CMD_BOOTZ
2013-03-26 14:53 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] ARM: AM33XX: Fix typo that causes an AM duplication in CPU name
2013-03-26 14:53 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] am335x: Enable DDR PHY dynamic power down bit for DDR3 boards
2013-03-26 14:53 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] am33xx: Add required includes to some omap/am33xx code
2013-03-26 14:52 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] am33xx:ddr:Fix config_sdram to work for all DDR
2013-03-26 14:52 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] arm: Correct CONFIG_STANDALONE_LOAD_ADDR for AM33XX/OMAP* platforms
2013-03-26 14:52 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH v3 1/3] am335x_evm: add support for BeagleBone Black DT name
2013-03-26 14:52 UTC (2+ messages)
` [U-Boot] [U-Boot, v3, "
[U-Boot] [PATCH v4] Allow AM335x MPU core clock speed to be specified in the board config file
2013-03-26 14:52 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH] Initialise correct GPMC WAITx irq for AM33xx
2013-03-26 14:51 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH 5/5] cm-t35: add support for loading splash image from NAND
2013-03-26 14:51 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH v4 0/9] Add TI814x EVM Support
2013-03-26 14:50 UTC (2+ messages)
[U-Boot] [PATCH] disk: part_dos: check harder for partition table
2013-03-26 14:05 UTC (3+ messages)
` [U-Boot] [PATCH] disk/part_dos: "
[U-Boot] [PATCH] cmd/gpt: Support gpt command for all devices
2013-03-26 14:04 UTC (2+ messages)
[U-Boot] [PATCH V2 0/9] OMAP3-5: TWL[46]03[05]: cleanup register access and misc minimal cleanups
2013-03-26 13:34 UTC (6+ messages)
[U-Boot] [PATCH 0/5] Add Support for Storage Devices with Blocksizes != 512
2013-03-26 12:05 UTC (12+ messages)
` [U-Boot] [PATCH 1/5] disk/gpt: Fix GPT Partition handling for Blocksize "
` [U-Boot] [PATCH v2] "
` [U-Boot] [PATCH 2/5] disk/iso: Add Support for Block Sizes > 512 Byte to ISO partition support
` [U-Boot] [PATCH 3/5] fs/fat: Don't multiply fatsize with sector size
` [U-Boot] [PATCH 4/5] part/dev_desc: Add log2 of Blocksize to block_dev_desc data struct
` [U-Boot] [PATCH v2] "
` [U-Boot] [PATCH 5/5] fs/ext4: Support device block sizes != 512 bytes
` [U-Boot] [PATCH v2] "
[U-Boot] [PATCH] cmd/gpt: Support gpt command for all devices
2013-03-26 12:00 UTC (3+ messages)
` [U-Boot] [PATCH v2] "
[U-Boot] [PATCH] mx23_olinuxino: Fix netboot console
2013-03-26 11:32 UTC (2+ messages)
[U-Boot] pull request for u-boot-tegra/master into ARM/master
2013-03-26 10:12 UTC (2+ messages)
[U-Boot] please pull u-boot-samsung master
2013-03-26 9:37 UTC (3+ messages)
[U-Boot] Splash Screen Enable in (u-boot-2009.08.tar.gz) U-boot source code
2013-03-26 9:25 UTC (6+ messages)
` [U-Boot] Splash Screen Enable in (u-boot-2013.01.01.tar.bz2) "
[U-Boot] 9g45 don't work
2013-03-26 7:22 UTC (3+ messages)
[U-Boot] [PATCH V3 0/5] ARM: OMAP4/5: Add support to boot with device tree as default
2013-03-26 4:27 UTC (6+ messages)
` [U-Boot] [PATCH V3 1/5] ARM: OMAP5: Rename omap5_evm to omap5_uevm
` [U-Boot] [PATCH V3 2/5] ARM: OMAP5: Set fdt_high to enable booting with Device tree
` [U-Boot] [PATCH V3 3/5] ARM: OMAP5: Allow use of a plain text env file
` [U-Boot] [PATCH V3 4/5] ARM: OMAP4/5: Change the default boot command to work with device tree
` [U-Boot] [PATCH V3 5/5] ARM: OMAP4/5: Make bootz as the default boot command
[U-Boot] [Patch v2] command/cache: Add flush_cache command
2013-03-26 0:01 UTC
[U-Boot] [Patch v2] PHY: micrel.c: add support for KSZ9031
2013-03-25 20:39 UTC (3+ messages)
[U-Boot] [PATCH v2] mmc: i.MX6: fsl_esdhc: Define maximum bus width supported by a board
2013-03-25 19:13 UTC
[U-Boot] [Patch v2, batch 4 01/29] 83xx/pcie: fix build error for 83xx pcie
2013-03-25 17:40 UTC (29+ messages)
` [U-Boot] [Patch v2, batch 4 02/29] Enable L2 cache parity/ECC error checking
` [U-Boot] [Patch v2, batch 4 03/29] net/phy: fix select line for TN80xx
` [U-Boot] [Patch v2, batch 4 04/29] powerpc/mpc85xx: check if core is disabled for showing status
` [U-Boot] [Patch v2, batch 4 05/29] powerpc/t4240qds: Add VDD override
` [U-Boot] [Patch v2, batch 4 06/29] T4240/ramboot: enable PBL tool for T4240
` [U-Boot] [Patch v2, batch 4 07/29] Add e6500 L2 replacement policy selection
` [U-Boot] [Patch v2, batch 4 08/29] powerpc/p5040: enable NAND, SD, SPI boot support
` [U-Boot] [Patch v2, batch 4 09/29] powerpc/T4160: Merge T4160 and T4240 in config_mpc85xx.h
` [U-Boot] [Patch v2, batch 4 10/29] powerpc/mpc8xxx: Add T1040 and variant SoCs
` [U-Boot] [Patch v2, batch 4 11/29] powerpc/chassis2: Change core numbering scheme
` [U-Boot] [Patch v2, batch 4 12/29] powerpc/mpc8xxx: Allow DDR overclock
` [U-Boot] [Patch v2, batch 4 13/29] powerpc/qixis: add clock measurement registers
` [U-Boot] [Patch v2, batch 4 14/29] powerpc/t4qds: use clock measurement for sysclk and ddr clock
` [U-Boot] [Patch v2, batch 4 15/29] powerpc/p5040: enable PBL tool support
` [U-Boot] [Patch v2, batch 4 16/29] board/t4240qds, b4860qds: LAW/TLB for DCSR set to size 32M
` [U-Boot] [Patch v2, batch 4 17/29] Enable XAUI interface for B4860QDS
` [U-Boot] [Patch v2, batch 4 18/29] powerpc/t4qds: Add SW7[4] in the DIP switch display
` [U-Boot] [Patch v2, batch 4 19/29] powerpc/t4240qds: fix PHY reset timeout issue
` [U-Boot] [Patch v2, batch 4 20/29] powerpc/doc: Fix the misalignment of document README.srio-pcie-boot-corenet
` [U-Boot] [Patch v2, batch 4 21/29] powerpc/b4860: fix for Serdes connectivity to SFP's
` [U-Boot] [Patch v2, batch 4 22/29] powerpc/p2041: fix serdes reference clock frequency display for PC board
` [U-Boot] [Patch v2, batch 4 23/29] sf: spansion: Add support for S25FL128S
` [U-Boot] [Patch v2, batch 4 24/29] powerpc/B4: Merge B4420 and B4860 in config_mpc85xx.h
` [U-Boot] [Patch v2, batch 4 25/29] powerpc/p5040: fix mdio mux for 10G port
` [U-Boot] [Patch v2, batch 4 26/29] powerpc/usb: Fix usb device-tree fix-up
` [U-Boot] [Patch v2, batch 4 27/29] fman/mEMAC: set SETSP bit in IF_MODE regisgter for RGMII speed
` [U-Boot] [Patch v2, batch 4 28/29] powerpc/b4860qds: Add LAW Target ID and Create LAW entry for Maple
` [U-Boot] [Patch v2, batch 4 29/29] SECURE BOOT - Removed deletion of TLB entries code
[U-Boot] [Patch v2, batch 3 01/17] common: Update cmd_bdinfo for PPC
2013-03-25 17:39 UTC (14+ messages)
` [U-Boot] [Patch v2, batch 3 05/17] powerpc/mpc85xx: Add setting of clock-frequency for T4/B4 clockgen node
` [U-Boot] [Patch v2, batch 3 06/17] t4240qds/eth: fixup ethernet for t4240qds
` [U-Boot] [Patch v2, batch 3 07/17] net/fm: fixup ethernet for mEMAC
` [U-Boot] [Patch v2, batch 3 08/17] powerpc/85xx: fix build error introduced by serdes_get_prtcl
` [U-Boot] [Patch v2, batch 3 09/17] net/phy: add VSC8574 support
` [U-Boot] [Patch v2, batch 3 10/17] T4240/net: use QSGMII card PHY address by default
` [U-Boot] [Patch v2, batch 3 11/17] T4/usb: move usb 2.0 utmi dual phy init code to cpu_init.c
` [U-Boot] [Patch v2, batch 3 12/17] powerpc/mpc85xx: Update workaround for DDR erratum A-004934
` [U-Boot] [Patch v2, batch 3 13/17] powerpc/mpc8xxx: Allow board file to override DDR address assignment
` [U-Boot] [Patch v2, batch 3 14/17] powerpc/b4860qds: Assign DDR address in board file
` [U-Boot] [Patch v2, batch 3 15/17] powerpc/t4qds: Fix disabling remote I2C connection
` [U-Boot] [Patch v2, batch 3 16/17] T4240/eth: fix SGMII card PHY address
` [U-Boot] [Patch v2, batch 3 17/17] powerpc/srio: Remove duplicate macro definitions
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox