messages from 2013-04-02 05:19:08 to 2013-04-03 13:12:03 UTC [more...]
[U-Boot] [PATCH 0/2] Add initial support for AQUILA-CYGNUS
2013-04-03 13:12 UTC (3+ messages)
` [U-Boot] [PATCH 1/2] Add DDR3 support for IGEP COM AQUILA/CYGNUS
` [U-Boot] [PATCH 2/2] ARM: Add "
[U-Boot] [PATCH] EXYNOS: Move includes from setup.h to tzpc_init.c
2013-04-03 12:11 UTC
[U-Boot] u-boot boot process is broken, how do i recover?
2013-04-03 11:55 UTC (4+ messages)
[U-Boot] [PATCH 0/3 V5] EXYNOS5: Add GPIO numbering feature
2013-04-03 11:54 UTC (4+ messages)
` [U-Boot] [PATCH 1/3 V5] EXYNOS5: Add gpio pin "
` [U-Boot] [PATCH 2/3 V5] S5P: Rename GPIO definitions
` [U-Boot] [PATCH 3/3 V5] EXYNOS5: GPIO: Enable GPIO Command for EXYNOS5
[U-Boot] [PATCH v2 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command
2013-04-03 10:15 UTC (2+ messages)
[U-Boot] [PATCH 1/1] i.MX6: mx6qsabrelite: README: don't pass chip-select to sf probe command
2013-04-03 10:13 UTC (4+ messages)
[U-Boot] [PATCH v10 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT
2013-04-03 9:52 UTC (31+ messages)
` [U-Boot] [PATCH v10 02/30] mtd: nand: mxc_nand: Fix is_16bit_nand()
` [U-Boot] [PATCH v10 03/30] nand: mxc: Prepare to add support for i.MX5
` [U-Boot] [PATCH v10 04/30] nand: mxc: Add "
` [U-Boot] [PATCH v10 05/30] imx: mx5: lowlevel_init: Simplify code
` [U-Boot] [PATCH v10 06/30] imx: mx53ard: Add support for NAND Flash
` [U-Boot] [PATCH v10 07/30] nand: mxc: Fix debug trace in mxc_nand_read_oob_syndrome()
` [U-Boot] [PATCH v10 08/30] nand: mxc: Use appropriate page number in syndrome functions
` [U-Boot] [PATCH v10 09/30] arm: start.S: Fix _TEXT_BASE for SPL
` [U-Boot] [PATCH v10 10/30] arm: relocate_code() is no longer noreturn
` [U-Boot] [PATCH v10 11/30] arm1136: Remove redundant relocate_code() return
` [U-Boot] [PATCH v10 12/30] arm: relocate_code(): Remove useless relocation offset computation
` [U-Boot] [PATCH v10 13/30] arm: relocate_code(): Use __image_copy_end for end of relocation
` [U-Boot] [PATCH v10 14/30] arm: crt0.S: Remove bogus .globl
` [U-Boot] [PATCH v10 15/30] autoconfig.mk: Make it possible to define configs from other configs
` [U-Boot] [PATCH v10 16/30] Makefile: Change CONFIG_SPL_PAD_TO to image offset
` [U-Boot] [PATCH v10 17/30] imx: Fix automatic make targets for imx images
` [U-Boot] [PATCH v10 18/30] nand: mxc: Switch NAND SPL to generic SPL
` [U-Boot] [PATCH v10 19/30] arm926ejs: Remove deprecated and now unused NAND SPL
` [U-Boot] [PATCH v10 20/30] arm: Remove unused relocate_code() parameters
` [U-Boot] [PATCH v10 21/30] Makefile: Move SHELL setup to config.mk
` [U-Boot] [PATCH v10 22/30] .gitignore: Add /SPL
` [U-Boot] [PATCH v10 23/30] imx: Add u-boot-with-spl.imx make target
` [U-Boot] [PATCH v10 24/30] imx: Add u-boot-with-nand-spl.imx "
` [U-Boot] [PATCH v10 25/30] arm: Remove support for smdk6400
` [U-Boot] [PATCH v10 26/30] Revert "mkconfig: start deprecating Makefile config targets"
` [U-Boot] [PATCH v10 27/30] arm: Remove support for unused s3c64xx
` [U-Boot] [PATCH v10 28/30] arm: Remove deprecated and now unused NAND SPL
` [U-Boot] [PATCH v10 29/30] arm1176: Remove unused MMU setup from start.S
` [U-Boot] [PATCH v10 30/30] arm: Make all linker scripts compatible with per-symbol sections
[U-Boot] [PATCH] mmc: mx6qsabrelite: fsl_esdhc: Define maximum bus width supported by SabreLite board
2013-04-03 9:52 UTC (5+ messages)
[U-Boot] [PATCH 1/3] wandboard: Remove duplicate 'mmc dev'
2013-04-03 9:51 UTC (9+ messages)
` [U-Boot] [PATCH 2/3] mx6qsabrelite: "
` [U-Boot] [PATCH 3/3] wandboard: Remove CONFIG_SYS_FSL_USDHC_NUM
[U-Boot] [PATCH v2] mx6: Fix get_board_rev() for the mx6 solo case
2013-04-03 9:36 UTC (2+ messages)
[U-Boot] [PATCH] mx23_olinuxino: Change definitions to use spaces instead of tabs
2013-04-03 9:15 UTC (2+ messages)
[U-Boot] [PATCH] mx25pdk: Enable imxdi RTC
2013-04-03 9:14 UTC (2+ messages)
[U-Boot] [PATCH] spi: mxc_spi: Fix ECSPI reset handling
2013-04-03 9:12 UTC (2+ messages)
[U-Boot] [PATCH] mx6qsabrelite: README: No need to pass 'u-boot.imx'
2013-04-03 8:58 UTC (2+ messages)
[U-Boot] [PATCH] mx28evk: Introduce a new target for saving env vars to NAND
2013-04-03 8:56 UTC (2+ messages)
[U-Boot] [PATCH v9 01/30] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT
2013-04-03 8:51 UTC (10+ messages)
` [U-Boot] [PATCH v9 18/30] nand: mxc: Switch NAND SPL to generic SPL
[U-Boot] [PATCH v5 0/3] i.MX6 SabreSD and SabreAUTO bmode support
2013-04-03 8:44 UTC (7+ messages)
` [U-Boot] [PATCH v5 1/3] mx6qsabresd: Document the mapping of USDHC[2-4]
` [U-Boot] [PATCH v5 2/3] mx6qsabresd: Fix card detection for invalid card id case
` [U-Boot] [PATCH v5 3/3] mx6qsabre{sd,auto}: Add boot mode select
` [U-Boot] [PATCH v5 3/3] mx6qsabre{sd, auto}: "
[U-Boot] [PATCH] Makefile: fix clobber target
2013-04-03 7:52 UTC
[U-Boot] [PATCH] mx6: fsl_esdhc: Fix waiting for DMA operation completion
2013-04-03 7:33 UTC (8+ messages)
[U-Boot] [PATCH 0/4] Exynos5: Add cpu freq and tmu throttling
2013-04-03 6:27 UTC (5+ messages)
` [U-Boot] [PATCH 1/4] pmic: max77686: add pmic_set_voltage api for max77686
` [U-Boot] [PATCH 2/4] Exynos5: cpufreq: Implement frequency scaling for exynos5
` [U-Boot] [PATCH 3/4] smdk5250: enable support for tmu throttling
` [U-Boot] [PATCH 4/4] Exynos5: config: enable cpu freq
[U-Boot] OMAP (4) boot_params
2013-04-03 5:56 UTC (2+ messages)
[U-Boot] [PATCH] doc/feature-removal-schedule.txt: Add CONFIG_SYS_(CLOCKS|PADS)_ENABLE_ALL
2013-04-03 3:16 UTC (4+ messages)
[U-Boot] PPC4XX Custom Board - Failing to read I2C
2013-04-03 0:51 UTC (2+ messages)
[U-Boot] [PATCH] cfi_flash: Use uintptr_t for casts from u32 to void *
2013-04-03 0:47 UTC
[U-Boot] [PATCH v7] mtd: cfi_flash: Fix CFI flash driver for 8-bit bus support
2013-04-02 23:14 UTC (3+ messages)
[U-Boot] [PATCH] Tegra: Split tegra_get_chip_type() into _soc and _sku functions
2013-04-02 21:24 UTC (2+ messages)
[U-Boot] [RFC/PATCH 0/4] BCH8 support for OMAP3
2013-04-02 21:19 UTC (16+ messages)
` [U-Boot] [PATCH v2 1/6] omap3/cpu.h: add BCH support
` [U-Boot] [PATCH v2 2/6] asm/omap_gpmc.h: consolidate common defines
` [U-Boot] [PATCH v2 3/6] omap3/omap_gpmc.h: add ooblayout for BCH8 as in kernel
` [U-Boot] [PATCH v2 4/6] omap_gpmc: change nandecc command
` [U-Boot] [PATCH v2 5/6] omap_gpmc: add support for hw assisted BCH8
` [U-Boot] [PATCH v2 6/6] tricorder: enable hw assisted BCH8 in SPL and u-boot
[U-Boot] [PATCH 2/2] OMAP4/5: I2C: New I2C driver files added
2013-04-02 19:16 UTC (2+ messages)
[U-Boot] [Patch v8] Consolidate bool type
2013-04-02 19:07 UTC (2+ messages)
[U-Boot] [PATCH 0/5] Add support for using an UBI volume for environment
2013-04-02 18:25 UTC (5+ messages)
` [U-Boot] [PATCH v2 0/6] "
` [U-Boot] [PATCH v2 3/6] ubi: ubifs: Turn off verbose prints
[U-Boot] Please pull u-boot-cfi-flash/master
2013-04-02 18:17 UTC (2+ messages)
[U-Boot] Potential issue with recent OMAP PRCM struct unification
2013-04-02 17:29 UTC (8+ messages)
[U-Boot] [PATCH v11 1/2] Introduced btrfs file-system with btrload command
2013-04-02 17:13 UTC (10+ messages)
` [U-Boot] [PATCH v11 2/2] Enable btrfs support in mx53loco config
[U-Boot] AM3517_EVM, MLO not booting
2013-04-02 17:09 UTC (5+ messages)
[U-Boot] [PATCH V4 0/5] ARM: OMAP4/5: Add support to boot with device tree as default
2013-04-02 17:07 UTC (6+ messages)
` [U-Boot] [PATCH V4 4/5] ARM: OMAP4/5: Change the default boot command to work with device tree
[U-Boot] [PATCH] ARMv7: start.S: stay in HYP mode if u-boot is entered in it
2013-04-02 15:43 UTC
[U-Boot] [PATCH v7] mtd: cfi_flash: Fix CFI flash driver for 8-bit bus support
2013-04-02 14:35 UTC (2+ messages)
[U-Boot] [PATCH] mtd: cfi_flash: Write buffer size adjustment for M29EW Numonyx devices
2013-04-02 14:35 UTC (2+ messages)
[U-Boot] [PATCH V3 00/10] OMAP3-5: TWL[46]03[05]: cleanup register access and misc minimal cleanups
2013-04-02 14:14 UTC (3+ messages)
[U-Boot] [PATCH 1/3] arm:goni: Adjustment of configuration for goni target
2013-04-02 13:55 UTC (3+ messages)
[U-Boot] [PATCH 0/7] usb: ss: Some fixes and cleanup for USB super-speed support
2013-04-02 13:53 UTC (33+ messages)
` [U-Boot] [PATCH 1/7] USB: Some cleanup prior to USB 3.0 interface addition
` [U-Boot] [PATCH 2/7] usb: hub: Conditionally power on usb's root-hub ports
` [U-Boot] [PATCH 3/7] usb: Update device class in usb device's descriptor
` [U-Boot] [PATCH 5/7] usb: hub: Increase device enumeration timeout for broken drives
` [U-Boot] [PATCH 6/7] USB: SS: Add support for Super Speed USB interface
` [U-Boot] [PATCH 4/7] usb: hub: Fix enumration timeout
[U-Boot] [RFC] Bootcount improvements
2013-04-02 13:17 UTC (2+ messages)
[U-Boot] [PATCH, v1] arm:trats: change auto-booting to boot kernel with separate device tree blob
2013-04-02 13:10 UTC
[U-Boot] [Patch v2] PHY: micrel.c: add support for KSZ9031
2013-04-02 12:04 UTC (4+ messages)
[U-Boot] Warning messages in latest u-boot-samsung
2013-04-02 11:15 UTC (6+ messages)
[U-Boot] [PATCH] biosemu: include <asm/io.h> header
2013-04-02 10:32 UTC (4+ messages)
[U-Boot] [PATCH v4 0/7] Add cros-ec protocol driver and enable it in smdk5250
2013-04-02 10:01 UTC (8+ messages)
` [U-Boot] [PATCH v4 1/7] cros: add cros_ec driver
` [U-Boot] [PATCH v4 2/7] cros: add I2C support for cros_ec
` [U-Boot] [PATCH v4 3/7] cros: add SPI "
` [U-Boot] [PATCH v4 4/7] cros: add LPC "
` [U-Boot] [PATCH v4 5/7] cros: adds cros_ec keyboard driver
` [U-Boot] [PATCH v4 6/7] cros: exynos: add cros-ec device nodes to exynos5250-snow.dts
` [U-Boot] [PATCH v4 7/7] cros: enable cros-ec for smdk5250
[U-Boot] Beagleboard: SPL hangs on serial init
2013-04-02 8:59 UTC (7+ messages)
` [U-Boot] [PATCH 1/1 v5] omap3_beagle: Flush UART3 xmit on enable if TEMT is broken
[U-Boot] [PATCH 0/2] Introduce Samsung's new board Trats2
2013-04-02 8:51 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] samsung: trats2: add support for "
[U-Boot] [PATCH 1/3] ppc4xx: Add SPL support
2013-04-02 8:37 UTC (4+ messages)
` [U-Boot] [PATCH 1/3 v2] "
[U-Boot] Support required for loading U-boot on SDRAM
2013-04-02 8:13 UTC (2+ messages)
[U-Boot] [PATCH v2 0/11] Add Regular Expressions Support
2013-04-02 7:34 UTC (5+ messages)
` [U-Boot] [PATCH v2 10/11] amcc-common.h: minor white space cleanup
` [U-Boot] [PATCH v2 11/11] amcc-common.h: enable support for "env grep", "setexpr", and regex
[U-Boot] [PATCH 0/4 V4] SMDK5250: FDT: Add device tree support for console
2013-04-02 6:46 UTC (5+ messages)
` [U-Boot] [PATCH 1/4 V4] EXYNOS5: FDT: Add compatible strings for Serial
` [U-Boot] [PATCH 2/4 V4] EXYNOS5: FDT: Add serial device node values
` [U-Boot] [PATCH 3/4 V4] S5P: Serial: Add fdt support to driver
` [U-Boot] [PATCH 4/4 V4] CONFIG: EXYNOS5: Enable silent console
[U-Boot] [PATCH] exynos: change indentation of defines in cpu.h
2013-04-02 5:22 UTC
[U-Boot] [PATCH 0/4 V3] SMDK5250: FDT: Add device tree support for console
2013-04-02 5:19 UTC (4+ messages)
` [U-Boot] [PATCH 1/4 V3] EXYNOS5: FDT: Add compatible strings for Serial
[U-Boot] [PATCH 0/3 V4] EXYNOS5: Add GPIO numbering feature
2013-04-02 5:19 UTC (5+ messages)
` [U-Boot] [PATCH 1/3 V4] EXYNOS5: Add gpio pin "
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox