messages from 2013-05-03 02:50:25 to 2013-05-06 07:58:13 UTC [more...]
[U-Boot] [PATCH 1/3] mx23: Operate DDR voltage supply at 2.5V
2013-05-06 7:58 UTC (13+ messages)
` [U-Boot] [PATCH 2/3] mx23evk: Do not set voltage selection bit for SSP pads
` [U-Boot] [PATCH 3/3] mx23_olinuxino: "
[U-Boot] [PATCH] mxs: Explain why some mx23 DDR registers are not configured
2013-05-06 7:57 UTC (2+ messages)
[U-Boot] [PATCH v3 0/9] Bring in new I2C framework
2013-05-06 6:52 UTC (11+ messages)
` [U-Boot] [PATCH v3 1/9] i2c: add i2c_core and prepare for new multibus support
` [U-Boot] [PATCH v3 2/9] i2c: common changes for multibus/multiadapter support
` [U-Boot] [PATCH v3 3/9] i2c, soft-i2c: switch to new "
` [U-Boot] [PATCH v3 4/9] i2c, fsl_i2c: "
` [U-Boot] [PATCH v3 5/9] i2c, multibus: get rid of CONFIG_I2C_MUX
` [U-Boot] [PATCH v3 6/9] i2c, multibus, keymile: get rid of EEprom_ivm envvariable
` [U-Boot] [PATCH v3 7/9] tegra: i2c: Add function to know about current bus
` [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework
` [U-Boot] [PATCH v3 9/9] i2c, ppc4xx_i2c: switch to new multibus/multiadapter support
[U-Boot] [PATCH v2 01/12] mtd: spi: winbond: add W25PXX support
2013-05-06 6:44 UTC (10+ messages)
` [U-Boot] [PATCH v3 00/11] arm: add Faraday A36x SoC platform support
` [U-Boot] [PATCH v3 06/11] mmc: update the Faraday FTSDC010 driver to fix performance issue
` [U-Boot] [PATCH v3 03/11] net: add Faraday FTMAC110 10/100Mbps ethernet support
[U-Boot] [PATCH] Powerpc/esdhc: Correct judgement for DATA PIO mode
2013-05-06 6:23 UTC
[U-Boot] [PATCH] mkimage: add option for adding dtc binary path via argument
2013-05-06 4:32 UTC (2+ messages)
[U-Boot] [PATCH 1/7] powerpc/doc: Update the README.srio-pcie-boot-corenet
2013-05-06 3:28 UTC (4+ messages)
` [U-Boot] [PATCH 2/7] powerpc/boot: Change the macro of Boot from SRIO and PCIE master module
[U-Boot] Question: issues for usb keyboard work with OHCI HCD
2013-05-06 3:01 UTC (3+ messages)
[U-Boot] [PULL] u-boot-pxa.git/master
2013-05-06 1:11 UTC
[U-Boot] [PULL] u-boot-usb/master
2013-05-06 1:11 UTC
[U-Boot] [PATCH] Fix usb buffer size for large descriptor of devices
2013-05-05 21:37 UTC (2+ messages)
[U-Boot] [PATCH] arm: mx23: Fix VDDMEM misconfiguration
2013-05-05 21:28 UTC (2+ messages)
[U-Boot] [PATCH V2] arm: mxs: Preprocess u-boot.bd so they contain full path
2013-05-05 21:27 UTC (2+ messages)
[U-Boot] [PATCH 1/4] arm: mxs: Add LCDIF clock configuration function
2013-05-05 21:26 UTC (2+ messages)
[U-Boot] [PATCH v3 01/25] imx: iomux-v3: Add iomux-mx25.h
2013-05-05 16:09 UTC (27+ messages)
` [U-Boot] [PATCH v3 02/25] imx: mx25pdk: Convert to iomux-v3
` [U-Boot] [PATCH v3 03/25] imx: mx25pdk: Fix GPIO assignments
` [U-Boot] [PATCH v3 04/25] imx: tx25: Convert to iomux-v3
` [U-Boot] [PATCH v3 05/25] imx: zmx25: "
` [U-Boot] [PATCH v3 06/25] imx: mx25: Remove legacy iomux support
` [U-Boot] [PATCH v3 07/25] imx: iomux-v3: Add iomux-mx35.h
` [U-Boot] [PATCH v3 08/25] imx: flea3: Convert to iomux-v3
` [U-Boot] [PATCH v3 09/25] imx: mx35pdk: Fix WDOG_RST iomux function
` [U-Boot] [PATCH v3 10/25] imx: mx35pdk: Convert to iomux-v3
` [U-Boot] [PATCH v3 11/25] imx: woodburn: "
` [U-Boot] [PATCH v3 12/25] imx: mx35: Remove legacy iomux support
` [U-Boot] [PATCH v3 13/25] imx: iomux-mx51: Fix MX51_PAD_EIM_CS2__GPIO2_27
` [U-Boot] [PATCH v3 14/25] imx: iomux-v3: Add missing definitions to iomux-mx51.h
` [U-Boot] [PATCH v3 15/25] imx: mx51evk: Convert to iomux-v3
` [U-Boot] [PATCH v3 16/25] imx: mx51_efikamx/sb: "
` [U-Boot] [PATCH v3 17/25] imx: vision2: "
` [U-Boot] [PATCH v3 18/25] imx: iomux-v3: Add iomux-mx53.h
` [U-Boot] [PATCH v3 19/25] imx: ima3-mx53: Convert to iomux-v3
` [U-Boot] [PATCH v3 20/25] imx: mx53ard: "
` [U-Boot] [PATCH v3 21/25] imx: mx53evk: "
` [U-Boot] [PATCH v3 22/25] imx: mx53loco: "
` [U-Boot] [PATCH v3 23/25] imx: mx53smd: "
` [U-Boot] [PATCH v3 24/25] imx: m53evk: "
` [U-Boot] [PATCH v3 25/25] imx: mx5: Remove legacy iomux support
[U-Boot] [PATCH 1/6] imx: Align the imximage header and payload to multiples of 4k
2013-05-05 16:06 UTC (5+ messages)
` [U-Boot] [PATCH 4/6] arm: mx5: Add SPL support code to MX5
` [U-Boot] [PATCH 5/6] arm: mx5: Add NAND clock handling
[U-Boot] [PATCH V2 1/6] imx: Align the imximage header and payload to multiples of 4k
2013-05-05 15:59 UTC (2+ messages)
[U-Boot] [PATCH 1/2] tools: arm: imx: Implement BOOT_OFFSET command for imximage
2013-05-05 15:57 UTC (9+ messages)
` [U-Boot] [PATCH V3 2/2] arm: mx5: Add support for DENX M53EVK
[U-Boot] [PATCH 0/2 v12] Btrfs filesystem port to U-boot
2013-05-05 15:15 UTC (6+ messages)
` [U-Boot] [PATCH 1/2 v12] Enable Btrfs support in mx53loco config
` [U-Boot] [PATCH 2/2 v12] Introduced btrfs file-system with btrload command
[U-Boot] [PATCH v5 0/7] mx23: Make DDR initialization stable
2013-05-05 15:10 UTC (10+ messages)
` [U-Boot] [PATCH v5 1/7] mx23: Fix pad voltage selection bit
` [U-Boot] [PATCH v5 2/7] mx23evk: Fix DDR pin iomux settings
` [U-Boot] [PATCH v5 3/7] mx23_olinuxino: "
` [U-Boot] [PATCH v5 4/7] mxs: spl_mem_init: Fix comment about start bit
` [U-Boot] [PATCH v5 5/7] mxs: spl_mem_init: Remove erroneous DDR setting
` [U-Boot] [PATCH v5 6/7] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers
` [U-Boot] [PATCH v5 7/7] mxs: spl_mem_init: Change EMI port priority
[U-Boot] [PATCH 01/12] imx: iomux-mx51: Fix MX51_PAD_EIM_CS2__GPIO2_27
2013-05-05 14:58 UTC (16+ messages)
` [U-Boot] [PATCH 04/12] imx: mx51_efikamx/sb: Convert to iomux-v3
` [U-Boot] [PATCH 12/12] imx: mx5: Remove legacy iomux support
[U-Boot] [PATCH 0/9] mx23: Make DDR initialization stable
2013-05-05 14:40 UTC (3+ messages)
` [U-Boot] [PATCH 8/9] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers
[U-Boot] Compiling U-BOOT bootloader on x86
2013-05-05 8:33 UTC (4+ messages)
[U-Boot] [PATCH 0/2 v12] Btrfs filesystem port to U-boot
2013-05-05 7:06 UTC (2+ messages)
[U-Boot] cfb_console and dcache on i.MX6
2013-05-05 2:00 UTC
[U-Boot] u-boot UBI support
2013-05-05 0:49 UTC (5+ messages)
[PATCH] Update doc/README.ubi to add description of accessing ubi filesystems
2013-05-05 0:44 UTC
[PATCH] Update doc/README.ubi to add description of accessing ubi filesystems
2013-05-05 0:44 UTC
[U-Boot] Netconsole in u-Boot-2013.01 seems to be broken
2013-05-04 20:53 UTC
[U-Boot] Compiling U-BOOT bootloader on x86
2013-05-04 18:19 UTC
[U-Boot] freescale i.MX28 mxsboot NAND booting on mx28evk bad blocks
2013-05-04 13:20 UTC (6+ messages)
[U-Boot] [PATCH] spi: mxc_spi: Fix pre and post divider calculation
2013-05-04 10:06 UTC (5+ messages)
[U-Boot] [PATCH 1/2] buildman: Allow conflicting tags to avoid spurious errors
2013-05-03 23:25 UTC (2+ messages)
[U-Boot] Please pull u-boot-mpc85xx.git
2013-05-03 23:05 UTC (4+ messages)
` [U-Boot] [PATCH] P1022DS: Set CONFIG_SPL_MAX_SIZE directly
[U-Boot] [RFC PATCH] mpc85xx: move generic corenet to cpu/mpc85xxx
2013-05-03 22:55 UTC (2+ messages)
[U-Boot] [PATCH 1/6] README: mx28_common: Keep the text within 80 columns
2013-05-03 20:47 UTC (13+ messages)
` [U-Boot] [PATCH 2/6] README: mx28_common: Do not hardcode the SSP port
` [U-Boot] [PATCH 3/6] README: mx28_common: Fix structure of sentence
` [U-Boot] [PATCH 4/6] README: mxs: Introduce README.mxs
` [U-Boot] [PATCH 5/6] mx28evk: Move README file inside board directory
` [U-Boot] [PATCH 6/6] m28evk: "
[U-Boot] [PATCH v3 0/9] FPGA cleanup + zynq support
2013-05-03 19:50 UTC (11+ messages)
` [U-Boot] [PATCH v3 1/9] fpga: Clean coding style
` [U-Boot] [PATCH v3 2/9] fpga: Fix debug message compilation error
` [U-Boot] [PATCH v3 3/9] cmd: fpga: Clean coding style
` [U-Boot] [PATCH v3 4/9] cmd: fpga: Move fpga_loadbitstream to fpga.c
` [U-Boot] [PATCH v3 5/9] fpga: Change the first parameter in fpga_loadbitstream
` [U-Boot] [PATCH v3 6/9] cmd: fpga: Do not include net.h
` [U-Boot] [PATCH v3 7/9] fpga: zynq: Add support for loading bitstream
` [U-Boot] [PATCH v3 8/9] fpga: Check device name against bitstream name
` [U-Boot] [PATCH v3 9/9] fpga: Remove all CONFIG_SYS_* fpga related options
[U-Boot] [PATCH] itest: Add bitwise and operator
2013-05-03 19:22 UTC (3+ messages)
[U-Boot] [PATCH] tools: default image: use ih_size for checking data size
2013-05-03 19:13 UTC (6+ messages)
[U-Boot] [PATCH] mx23: Add a README file
2013-05-03 16:18 UTC (3+ messages)
[U-Boot] [PATCH 0/3] Tegra: USB: EHCI: add Tegra30 compatible support
2013-05-03 15:02 UTC (11+ messages)
` [U-Boot] [PATCH 1/3] ARM: Tegra: FDT: Add USB support for T20/T30/T114
` [U-Boot] [PATCH 2/3] ARM: Tegra: USB: Add driver support for Tegra30/Tegra114
[U-Boot] [PATCH v4 0/7] mx23: Make DDR initialization stable
2013-05-03 14:12 UTC (10+ messages)
` [U-Boot] [PATCH v4 1/7] mx23: Fix pad voltage selection bit
` [U-Boot] [PATCH v4 2/7] mx23evk: Fix DDR pin iomux settings
` [U-Boot] [PATCH v4 3/7] mx23_olinuxino: "
` [U-Boot] [PATCH v4 4/7] mxs: spl_mem_init: Fix comment about start bit
` [U-Boot] [PATCH v4 5/7] mxs: spl_mem_init: Remove erroneous DDR setting
` [U-Boot] [PATCH v4 6/7] mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registers
` [U-Boot] [PATCH v4 7/7] mxs: spl_mem_init: Change EMI port priority
[U-Boot] Regression from v2013.04-rc3 with sdcard detection
2013-05-03 12:35 UTC (5+ messages)
[U-Boot] [PATCH v2] at91sam9x5ek: Pass serial and revision tags to Linux
2013-05-03 10:54 UTC
[U-Boot] uboot source code for MPC8641D & MPC8548E
2013-05-03 10:48 UTC
[U-Boot] Regarding tdm3730
2013-05-03 10:42 UTC
[U-Boot] [PATCH 1/2] microblaze: bootm: Fix coding style issues
2013-05-03 7:26 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] microblaze: bootm: Add support for loading initrd
[U-Boot] [PATCH v2] gpio: Add support for microblaze xilinx GPIO
2013-05-03 7:10 UTC
[U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode
2013-05-03 5:12 UTC (2+ messages)
[U-Boot] [PATCH v1] bfin: Move gpio support for bf54x and bf60x into the generic driver folder
2013-05-03 4:53 UTC (3+ messages)
[U-Boot] [PATCH 0/4] EXYNOS: Convert Assembly code to c and make it common
2013-05-03 4:39 UTC (2+ messages)
[U-Boot] [PATCH v3 0/9] mx23: Make DDR initialization stable
2013-05-03 3:22 UTC (9+ messages)
` [U-Boot] [PATCH v3 2/7] mx23evk: Fix DDR pin iomux settings
` [U-Boot] [PATCH v3 5/7] mxs: spl_mem_init: Remove erroneous DDR setting
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox