messages from 2013-05-20 06:13:15 to 2013-05-22 16:00:52 UTC [more...]
[U-Boot] [PATCH 1/3] mmc: report capacity for the selected partition
2013-05-22 16:00 UTC (5+ messages)
` [U-Boot] [PATCH 2/3] env_mmc: allow negative CONFIG_ENV_OFFSET
` [U-Boot] [PATCH 3/3] ARM: tegra: make use of negative ENV_OFFSET on NVIDIA boards
[U-Boot] [PATCH 1/6] powerpc/mpc85xx: support application without resetvec segment in the linker script
2013-05-22 15:45 UTC (8+ messages)
` [U-Boot] [PATCH 2/6] powerpc/mpc85xx: modify the functionality clear_bss and the end address of the BSS
` [U-Boot] [PATCH 5/6] spl: Make CONFIG_SPL_BUILD contain more functionality
[U-Boot] [PATCH] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
2013-05-22 15:44 UTC (9+ messages)
[U-Boot] [PATCH] tools/fw_env: use fsync to ensure that data is physically stored
2013-05-22 15:33 UTC (5+ messages)
[U-Boot] Building two different "SPL" for the same board?
2013-05-22 15:26 UTC (4+ messages)
[U-Boot] [PATCH] ARM: cfi_flash: Fix unaligned accesses to cfi_qry structure
2013-05-22 15:12 UTC (6+ messages)
` [U-Boot] "
[U-Boot] [PATCH 1/2] Update MAINTAINERS file for x86
2013-05-22 15:00 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] Update MAINTAINERS file for sandbox
[U-Boot] [PATCH] .gitignore: add GNU GLOBAL files
2013-05-22 14:59 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if defined
2013-05-22 14:59 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH v4] bootm: Avoid 256-byte overflow in fixup_silent_linux()
2013-05-22 14:59 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH v3 00/10] MIPS: initial support for emulated Malta board
2013-05-22 13:57 UTC (11+ messages)
` [U-Boot] [PATCH v3 01/10] MIPS: qemu-malta: add support for emulated MIPS "
` [U-Boot] [PATCH v3 02/10] MIPS: qemu-malta: add reset support
` [U-Boot] [PATCH v3 03/10] MIPS: qemu-malta: enable flash support
` [U-Boot] [PATCH v3 04/10] MIPS: import gt64120.h header from Linux
` [U-Boot] [PATCH v3 05/10] MIPS: qemu-malta: setup GT64120 registers as done by YAMON
` [U-Boot] [PATCH v3 06/10] MIPS: qemu-malta: add PCI support
` [U-Boot] [PATCH v3 07/10] net: pcnet: use pci_virt_to_mem to obtain buffer addresses
` [U-Boot] [PATCH v3 08/10] MIPS: qemu-malta: bring up ethernet
` [U-Boot] [PATCH v3 09/10] MIPS: bootm.c: add YAMON style Linux preparation/jump code
` [U-Boot] [PATCH v3 10/10] MIPS: start.S: emulate REVISION register for qemu-malta
[U-Boot] [PATCH] arm: pxa: PXA270 D-Cache as ram
2013-05-22 13:54 UTC (20+ messages)
[U-Boot] [PATCH] da830: add MMC support
2013-05-22 13:38 UTC
[U-Boot] [PATCH] mmc write bug fix
2013-05-22 11:19 UTC
[U-Boot] [PULL] please pull u-boot-atmel/master
2013-05-22 9:59 UTC (2+ messages)
[U-Boot] [Patch v2 0/4] ARM: atmel: add sama5d3xek board support
2013-05-22 8:45 UTC (5+ messages)
` [U-Boot] [Patch v2 2/4] NET: macb: support sama5d3x devices
[U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board
2013-05-22 8:23 UTC
[U-Boot] [PATCH] common: board_f: Do not call board_postclk_init twice
2013-05-22 7:08 UTC
[U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support
2013-05-22 5:30 UTC (18+ messages)
` [U-Boot] [PATCH v3 1/6] arm: mvf600: Add Vybrid MVF600 CPU support
` [U-Boot] [PATCH v3 2/6] arm: mvf600: Add IOMUX support for Vybrid MVF600
` [U-Boot] [PATCH v3 3/6] net: fec_mxc: Add "
` [U-Boot] [PATCH v3 4/6] arm: mvf600: Add watchdog "
` [U-Boot] [PATCH v3 5/6] arm: mvf600: Add uart "
` [U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board
[U-Boot] [PATCH v3 6/6] arm: mvf600: Add basic support for Vybrid MVF600TWR board
2013-05-22 5:28 UTC
[U-Boot] [PATCH v3 2/6] arm: mvf600: Add IOMUX support for Vybrid MVF600
2013-05-22 5:22 UTC
[U-Boot] [PATCH v3 0/6] arm: mvf600: Add Freescale Vybrid MVF600 CPU and MVF600TWR board support
2013-05-22 5:08 UTC
[U-Boot] Issue in DWMMC in mainline
2013-05-22 3:32 UTC (3+ messages)
[U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support
2013-05-22 1:01 UTC (3+ messages)
[U-Boot] [PATCH 1/9] wandboard: Return error if the SDHC port index is invalid
2013-05-22 0:53 UTC (16+ messages)
` [U-Boot] [PATCH 2/9] mx53loco: "
` [U-Boot] [PATCH 3/9] mx51evk: "
` [U-Boot] [PATCH 4/9] mx53ard: "
` [U-Boot] [PATCH 5/9] mx53evk: "
` [U-Boot] [PATCH 6/9] mx53smd: "
` [U-Boot] [PATCH 7/9] mx6qarm2: "
` [U-Boot] [PATCH 8/9] mx6qsabrelite: "
` [U-Boot] [PATCH 9/9] mx6qsabresd: "
[U-Boot] [PATCH v2 1/2] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit
2013-05-21 23:45 UTC (2+ messages)
` [U-Boot] [PATCH v2 2/2] tegra: Define CONFIG_SKIP_LOWLEVEL_INIT for SPL build
[U-Boot] [PATCH 1/2] powerpc/83xx/km: MV88e6122 errata fix for 1.9V
2013-05-21 23:12 UTC (2+ messages)
[U-Boot] [PATCH 1/7] ahci: use ports implemented map instead of num_ports
2013-05-21 22:44 UTC (7+ messages)
` [U-Boot] [PATCH 2/7] ahci: fix unaligned access
` [U-Boot] [PATCH 3/7] ahci: fix memory leak in ata_scsiop_inquiry
` [U-Boot] [PATCH 4/7] ahci: move link bring-up handling to separate function
` [U-Boot] [PATCH 5/7] ahci: handle COMINIT received during spin-up
` [U-Boot] [PATCH 6/7] ahci: increase spin-up timeout to 20 sec
` [U-Boot] [PATCH 7/7] ahci: convert to use libata functions and definitions
[U-Boot] [PATCH] p1020rdb-pd: platform support
2013-05-21 22:23 UTC (2+ messages)
[U-Boot] [PATCH v4 0/7] Add gdsys ControlCenter Digital board
2013-05-21 22:14 UTC (3+ messages)
` [U-Boot] [PATCH v4 3/7] mpc85xx: Add CONFIG_RELEASE_CORE0_ONLY
[U-Boot] [U-Boot,v2] cmd_boot: cleanup for 'go' command
2013-05-21 22:12 UTC (2+ messages)
[U-Boot] Questions about U-boot of customized MPC8315E board
2013-05-21 22:03 UTC (2+ messages)
[U-Boot] ARM v7: Flush icache when executing a program with go
2013-05-21 21:57 UTC (18+ messages)
[U-Boot] [PATCH 09/10] ARM: highbank: fix build with CONFIG_MISC_INIT_R turned off
2013-05-21 21:33 UTC (5+ messages)
` [U-Boot] [PATCH v2] ARM: highbank: compile misc_init_r only if CONFIG_MISC_INIT_R
` [U-Boot] [PATCH v2] ARM: highbank: setup peripherals based on power domain status
` [U-Boot] [PATCH v2] ARM: highbank: update config options
` [U-Boot] [PATCH v2] ARM: move interrupt_init to before relocation
[U-Boot] MPC834x U-Boot problem
2013-05-21 20:11 UTC
[U-Boot] [PATCH v9 0/5] usb: add Faraday EHCI & Gadget support
2013-05-21 20:09 UTC (3+ messages)
` [U-Boot] [PATCH v9 1/5] usb: ehci: prevent bad PORTSC register access
[U-Boot] [PATCH] arm: pxa: config option for PXA270 turbo mode
2013-05-21 20:09 UTC (15+ messages)
[U-Boot] [PATCH] Fix device detection for API consumers
2013-05-21 18:14 UTC (2+ messages)
[U-Boot] [PATCH] ARM: arm720t: Add missing CONFIG_SKIP_LOWLEVEL_INIT guard for cpu_init_crit
2013-05-21 17:51 UTC (7+ messages)
[U-Boot] [PATCH 0/2] Add ccache support
2013-05-21 15:05 UTC (8+ messages)
` [U-Boot] [PATCH 1/2] common: Add CCACHE variable to allow use of ccache
` [U-Boot] [PATCH 2/2] common: Use separate dirs for each board for ccache
[U-Boot] [PATCH] arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12
2013-05-21 13:39 UTC
[U-Boot] [PATCH v3 0/4] Factorize ARM relocate_code instances
2013-05-21 13:24 UTC (6+ messages)
` [U-Boot] [PATCH v4 "
[U-Boot] [PATCH 0/2 V2] EXYNOS5: Enable Gigabyte device GD25LQ and GD25Q64B
2013-05-21 13:10 UTC (8+ messages)
` [U-Boot] [PATCH 1/2 V2] SF: Add driver for "
[U-Boot] [PATCH] drivers:power:max77693: add support for new multi function pmic max77693
2013-05-21 13:00 UTC
[U-Boot] [PATCH V2] drivers:power:max77686: add function to set voltage and mode
2013-05-21 12:54 UTC
[U-Boot] [PATCH 0/3] Add Arndale board support
2013-05-21 12:53 UTC (2+ messages)
[U-Boot] load file to memory in standalone program
2013-05-21 12:33 UTC (4+ messages)
[U-Boot] [PATCH 2/2] EXYNOS: SPI: Support SPI_PREAMBLE mode
2013-05-21 12:30 UTC (3+ messages)
` [U-Boot] [PATCH v2] "
[U-Boot] [PATCH] Exynos: uart: s5p: enabling the uart tx/rx fifo
2013-05-21 11:27 UTC (2+ messages)
[U-Boot] [PATCH 1/3] fw_env: fix type of len
2013-05-21 11:19 UTC (4+ messages)
` [U-Boot] [PATCH 3/3] fw_env: fix building w/out a config.h
[U-Boot] [PATCH] Exynos5: clock: Update the equation to calculate PLL output frequency
2013-05-21 11:19 UTC (2+ messages)
[U-Boot] [PATCH] arm: pxa: Add support for ICP DAS LP-8x4x
2013-05-21 10:43 UTC (3+ messages)
` [U-Boot] [PATCH v2] "
[U-Boot] [PATCH 1/3] ARM: at91: add Atmel sama5d3 SoC new pmc register
2013-05-21 9:57 UTC (7+ messages)
` [U-Boot] [U-Boot,1/3] "
` [U-Boot] [U-Boot,2/3] USB: ohci-at91: support sama5d3x devices
` [U-Boot] [U-Boot,3/3] ARM: atmel: add sama5d3xek support
` [U-Boot] [U-Boot,1/3] ARM: at91: fix and update README.at91 document
` [U-Boot] [U-Boot,2/3] ARM: at91: add at91sam9x5 and sama5d3x information
` [U-Boot] [U-Boot,3/3] ARM: at91: add NAND partition table and index
[U-Boot] [U-BOOT] mmc: sdhci: Enable 8-bit bus width only for 3.0 spec onwards
2013-05-21 9:31 UTC
[U-Boot] [PATCH v3 0/12] Introduce Samsung's new board Trats2
2013-05-21 9:00 UTC (3+ messages)
[U-Boot] [PATCH v03 0/2] OMAP3+: introduce generic Adaptive Body Bias Support
2013-05-21 8:42 UTC (3+ messages)
` [U-Boot] [PATCH v03 1/2] OMAP3+: introduce generic ABB support
` [U-Boot] [PATCH v03 2/2] OMAP5: add ABB setup for MPU voltage domain
[U-Boot] [PATCH 0/3 V5] EXYNOS5: Add GPIO numbering feature
2013-05-21 7:44 UTC (3+ messages)
` [U-Boot] [PATCH 3/3 V5] EXYNOS5: GPIO: Enable GPIO Command for EXYNOS5
[U-Boot] [PATCH] cmd_mem: fix cp command
2013-05-21 7:08 UTC
[U-Boot] [U-boot]: MMC: add sdhci generic framework
2013-05-21 4:19 UTC (3+ messages)
[U-Boot] U-Boot configuration on LM3S8962 problem
2013-05-21 2:09 UTC
[U-Boot] [PATCH v02 0/2] OMAP3+: introduce generic Adaptive Body Bias Support
2013-05-20 13:51 UTC (5+ messages)
` [U-Boot] [PATCH v02 1/2] OMAP3+: introduce generic ABB support
[U-Boot] [PATCH V2 OMAP-ULPI]: This patch fix the omap access to the transceiver configuration registers using the ulpi bus
2013-05-20 10:21 UTC (3+ messages)
[U-Boot] [PATCH v3 0/9] Bring in new I2C framework
2013-05-20 6:13 UTC (4+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox