messages from 2013-06-18 20:13:18 to 2013-06-20 18:28:01 UTC [more...]
[U-Boot] [PATCH 1/3] arm: spl: Fix SPL booting for OMAP3
2013-06-20 18:28 UTC (5+ messages)
[U-Boot] bootm does not work if netconsole is enabled
2013-06-20 18:00 UTC (4+ messages)
[U-Boot] [PATCH] nand: Don't call adjust_size_for_badblocks for erase
2013-06-20 17:52 UTC
[U-Boot] [PATCH v4 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
2013-06-20 17:40 UTC (9+ messages)
` [U-Boot] [PATCH v4 2/3] ARM: Tegra: USB: EHCI: Add support for Tegra30/Tegra114
` [U-Boot] [PATCH v4 3/3] Tegra: Config: Enable Tegra30/Tegra114 USB function
[U-Boot] [PATCH v2] dfu, nand: before write a buffer to nand, erase the nand sectors
2013-06-20 17:22 UTC (3+ messages)
[U-Boot] [PATCH] arm: fix memory coherency problem after relocation
2013-06-20 17:04 UTC (3+ messages)
[U-Boot] [PATCH v3 0/12] Verified boot implementation based on FIT
2013-06-20 16:18 UTC (5+ messages)
` [U-Boot] [PATCH v3 12/12] Add verified boot information and test
[U-Boot] [PATCH] README: align default commands with code
2013-06-20 16:14 UTC
[U-Boot] [PATCH] gpio: omap_gpio: Fix valid gpio range for AM33XX
2013-06-20 15:47 UTC (3+ messages)
[U-Boot] [PATCH] gpio: spear_gpio: Fix gpio_set_value() implementation
2013-06-20 15:11 UTC (8+ messages)
[U-Boot] [uBoot] [PATCH v2] musb: Move linux and usb compat files to include/linux/usb
2013-06-20 15:02 UTC (6+ messages)
[U-Boot] Not abled to upload binary using "dfu-util"
2013-06-20 14:47 UTC (4+ messages)
[U-Boot] Not able to boot using zImage
2013-06-20 14:45 UTC (2+ messages)
[U-Boot] [PATCH 1/2] PHY: micrel: helper function for KSZ9031
2013-06-20 14:44 UTC (5+ messages)
` [U-Boot] [PATCH 2/2] ARM: Congatec: Ethernet: Add support for cgtqmx6qeval
[U-Boot] [PATCH v2 1/3] PHY: micrel: helper function for KSZ9031
2013-06-20 14:37 UTC (6+ messages)
` [U-Boot] [PATCH v2 2/3] ARM: Congatec: Ethernet: Add support for cgtqmx6qeval
` [U-Boot] [PATCH v2 3/3] ARM: Congatec: README update
[U-Boot] [PATCH v6 0/2] pxa: add support for palmtreo680 board
2013-06-20 13:53 UTC (2+ messages)
[U-Boot] [PATCH v2 0/3] Add ethernet support for Congatec qmx6qeval
2013-06-20 13:46 UTC
[U-Boot] [PATCH v2] Add support for Wandboard quad
2013-06-20 13:26 UTC (2+ messages)
[U-Boot] [PATCH v4 0/6] Update gdsys ppc4xx-based boards
2013-06-20 13:15 UTC (7+ messages)
` [U-Boot] [PATCH v4 1/6] powerpc/ppc4xx: Use generic accessor functions for gdsys FPGA
` [U-Boot] [PATCH v4 2/6] powerpc/ppc4xx: Add gdsys mclink interface
` [U-Boot] [PATCH v4 3/6] powerpc/ppc4xx: Add fpgad command for dumping gdsys fpga registers
` [U-Boot] [PATCH v4 4/6] powerpc/ppc4xx: Support gdsys multichannel iocon hardware
` [U-Boot] [PATCH v4 5/6] powerpc/ppc4xx: Consider gdsys FPGA OSD size
` [U-Boot] [PATCH v4 6/6] powerpc/ppc4xx: Remove CONFIG_SYS_FLASH_PROTECTION from gdsys boards
[U-Boot] [PATCH v6 0/5] Add gdsys ControlCenter Digital board
2013-06-20 13:06 UTC (7+ messages)
` [U-Boot] [PATCH v6 2/5] i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0
` [U-Boot] [PATCH v6 4/5] Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM
[U-Boot] [PATCH 0/2] Add ethernet support for Congatec qmx6qeval
2013-06-20 11:26 UTC
[U-Boot] [PATCH v3 17/21] arm: Implement the 'fake' go command
2013-06-20 9:55 UTC (2+ messages)
[U-Boot] [PATCH v3 0/9] Bring in new I2C framework
2013-06-20 9:19 UTC (16+ messages)
[U-Boot] Pull request for u-boot-marvell.git
2013-06-20 8:44 UTC (8+ messages)
` [U-Boot] Pull request for u-boot-marvell.git - PLEASE HOLD ON
` [U-Boot] Pull request for u-boot-marvell.git - go ahead
[U-Boot] [PATCH v2] exynos5250: remove redundant SPI and PMIC related configs
2013-06-20 8:10 UTC (3+ messages)
[U-Boot] AM335x: enabling datacache in SPL slows down system?
2013-06-20 8:05 UTC
[U-Boot] [PATCH 01/10 v5] powerpc/mpc85xx: support application without resetvec segment in the linker script
2013-06-20 8:04 UTC (10+ messages)
` [U-Boot] [PATCH 02/10 v5] powerpc/mpc85xx: modify the functionality clear_bss and aligning the end address of the BSS
` [U-Boot] [PATCH 03/10 v5] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL
` [U-Boot] [PATCH 04/10 v5] Makefile: move the common makefile line to public area
` [U-Boot] [PATCH 05/10 v5] powerpc: deleted unused symbol CONFIG_SPL_NAND_MINIMAL and enabled some functionality for common SPL
` [U-Boot] [PATCH 06/10 v5] spl: env_common.c: make CONFIG_SPL_BUILD contain function env_import
` [U-Boot] [PATCH 07/10 v5] powerpc/p1022ds: boot from SD Card with SPL
` [U-Boot] [PATCH 08/10 v5] powerpc/p1022ds: boot from spi flash "
` [U-Boot] [PATCH 09/10 v5] nand: tpl : introduce the TPL based on the SPL
` [U-Boot] [PATCH 10/10 v5] powerpc: p1022ds: support TPL on the P1022DS
[U-Boot] Flash not Erased
2013-06-20 7:50 UTC (3+ messages)
[U-Boot] [PATCH] gpio: omap_gpio: Remove check_gpio() function
2013-06-20 7:44 UTC (4+ messages)
[U-Boot] [PATCH v2] exynos5250: move board specific configs to board specific config file
2013-06-20 7:10 UTC (3+ messages)
[U-Boot] [PATCH 0/4 V5] SMDK5250: FDT: Add device tree support for console
2013-06-20 6:44 UTC (2+ messages)
[U-Boot] [PATCH v2 0/3] net2big_v2: initialize fan and LEDs at startup
2013-06-20 5:37 UTC (3+ messages)
[U-Boot] nand onfi 8bit/16bit bus support
2013-06-20 5:32 UTC (4+ messages)
[U-Boot] [PATCH 0/8] rely on latest dtc, simplify
2013-06-20 5:24 UTC (25+ messages)
` [U-Boot] [PATCH 1/8] xilinx: move microblaze-generic .dts to standard location
` [U-Boot] [PATCH 2/8] dts/Makefile: simplify dtc invocation
` [U-Boot] [PATCH 3/8] dts/Makefile: unify cpp/dtc include paths
` [U-Boot] [PATCH 4/8] dt: don't use ARCH_CPU_DTS
` [U-Boot] [PATCH 5/8] dts/Makefile: don't define ARCH_CPU_DTS, BOARD_DTS
` [U-Boot] [PATCH 6/8] config: don't define CONFIG_ARCH_DEVICE_TREE
` [U-Boot] [PATCH 7/8] dts/Makefile: don't use cpp -P
` [U-Boot] [PATCH 8/8] dts/Makefile: pass -undef -D__DTS__ to cpp
[U-Boot] [PATCH v2 0/21] Add tracing functionality to U-Boot
2013-06-20 4:16 UTC (8+ messages)
` [U-Boot] [PATCH v2 17/21] arm: Implement the 'fake' go command
[U-Boot] [PATCH V3 0/3] Introduce Samsung's new board Trats2
2013-06-20 4:07 UTC (3+ messages)
[U-Boot] [PATCH] arm, am33xx: move s_init to a common place
2013-06-20 3:52 UTC (5+ messages)
[U-Boot] gpio: Question about gpio_set_value() implementation in spear_gpio.c
2013-06-20 3:52 UTC (7+ messages)
[U-Boot] Merge Window close date
2013-06-20 2:32 UTC (9+ messages)
[U-Boot] [PATCH v2 0/7] ARMv7: Add HYP mode switching support
2013-06-19 23:40 UTC (9+ messages)
` [U-Boot] [PATCH v2 3/7] ARM: add assembly routine to switch to non-secure state
` [U-Boot] [PATCH v2 4/7] ARM: switch to non-secure state during bootm execution
` [U-Boot] [PATCH v2 5/7] ARM: add SMP support for non-secure switch
` [U-Boot] [PATCH v2 6/7] ARM: extend non-secure switch to also go into HYP mode
[U-Boot] Please pull u-boot-ti/master
2013-06-19 23:18 UTC (2+ messages)
[U-Boot] [PATCH 1/4] sf: Unify spi_flash write code
2013-06-19 21:07 UTC (4+ messages)
[U-Boot] [PATCH 2/8 v2] powerpc/mpc85xx: modify the functionality clear_bss and aligning the end address of the BSS
2013-06-19 16:36 UTC (3+ messages)
` [U-Boot] [PATCH 8/8] powerpc/p1022ds: boot from spi flash with SPL
[U-Boot] [PATCH 10/10] powerpc: p1022ds: support TPL on the P1022DS
2013-06-19 16:20 UTC (3+ messages)
[U-Boot] please pull u-boot-samsung master
2013-06-19 15:59 UTC (10+ messages)
[U-Boot] [PATCH 1/1] NET: Fix system hanging if NET device is not installed
2013-06-19 12:36 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] dfu: make data buffer size configurable
2013-06-19 12:25 UTC (3+ messages)
` [U-Boot] [PATCH v2] "
[U-Boot] [PATCH v4 1/3] Prepare for TI816X : reuse existing code from TI814X
2013-06-19 10:08 UTC (3+ messages)
` [U-Boot] [PATCH v4 2/3] Add TI816X support
` [U-Boot] [PATCH v4 3/3] Add TI816X evm board support
[U-Boot] [PATCH v4 0/3] Add TI816X EVM support
2013-06-19 10:08 UTC
[U-Boot] [PATCH v4 02/14] sf: Discover the bank addr commands
2013-06-19 9:44 UTC (8+ messages)
` [U-Boot] [PATCH v4 05/14] sf: Update sf read to support all sizes of flashes
` [U-Boot] [PATCH v4 14/14] sf: Add Flag status register polling support
[U-Boot] [[PATCH]] imx6: fix GPR2 wrong definition
2013-06-19 9:16 UTC
[U-Boot] [PATCH] Fix for incorrect conversion hex string to number (FMAN firmware address)
2013-06-19 7:48 UTC
[U-Boot] [PATCH v2 0/6] Optimize ARM relocation
2013-06-19 7:31 UTC (8+ messages)
` [U-Boot] [PATCH v3 "
` [U-Boot] [LONG] "
[U-Boot] [PATCH 0/3 v2] video: lcd: splash screen prepare changes
2013-06-19 5:38 UTC (5+ messages)
` [U-Boot] [PATCH 3/3] omap: cm_t35: Fix cm_t35 for weak splash_screen_prepare
[U-Boot] [PATCH] ARM: OMAP4+: Fix MA detection during SDRAM_AUTO_DETECTION
2013-06-19 5:20 UTC
[U-Boot] [PATCH 4/4] sf: Warn to use BAR for > 16MiB flashes
2013-06-19 4:32 UTC (2+ messages)
[U-Boot] [PATCH v3 0/16] Driver model implementation, tests, demo and GPIO
2013-06-19 3:52 UTC (17+ messages)
` [U-Boot] [PATCH v3 01/16] sandbox: Make map_to_sysmem() use a constant pointer
` [U-Boot] [PATCH v3 02/16] sandbox: Correct data sizes and printf() strings in fdtdec.c
` [U-Boot] [PATCH v3 03/16] sandbox: config: Don't use 64-bit physical memory
` [U-Boot] [PATCH v3 04/16] sandbox: Build a device tree file for sandbox
` [U-Boot] [PATCH v3 05/16] Add cmd_process_error() to report and process errors
` [U-Boot] [PATCH v3 06/16] sandbox: config: Enable driver model
` [U-Boot] [PATCH v3 07/16] dm: Add base driver model support
` [U-Boot] [PATCH v3 08/16] dm: Set up driver model after relocation
` [U-Boot] [PATCH v3 09/16] dm: Add basic tests
` [U-Boot] [PATCH v3 10/16] dm: Add a 'dm' command for testing
` [U-Boot] [PATCH v3 11/16] dm: Add a demonstration/example driver
` [U-Boot] [PATCH v3 12/16] dm: Add GPIO support and tests
` [U-Boot] [PATCH v3 13/16] sandbox: Convert GPIOs to use driver model
` [U-Boot] [PATCH v3 14/16] dm: Enable gpio command to support "
` [U-Boot] [PATCH v3 15/16] dm: Add README for "
` [U-Boot] [PATCH v3 16/16] dm: Move old driver model documentation into an 'old-docs' directory
[U-Boot] [PATCH v2 1/3] ARM: Tegra: FDT: Add USB EHCI function for T30/T114
2013-06-18 22:59 UTC (5+ messages)
[U-Boot] [PATCH] mtd: nand: fix initialization of BBT options
2013-06-18 20:41 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH][v2] powerpc/85xx: Add TWR-P10xx board support
2013-06-18 20:35 UTC (3+ messages)
` [U-Boot] MIPI-CSI Support question
[U-Boot] [PATCH 1/2] powerpc/85xx: Add C29x SoC support
2013-06-18 20:25 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] powerpc/c29xpcie: add support for C29XPCIE board
[U-Boot] Bug in fdt_fixup_fman_firmware
2013-06-18 20:13 UTC (2+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox