messages from 2013-08-03 18:35:28 to 2013-08-06 15:22:56 UTC [more...]
[U-Boot] [PATCH 0/7] arm, am33xx, video: add video support for am33xx based boards
2013-08-06 15:22 UTC (3+ messages)
` [U-Boot] [PATCH 1/7] arm, am335x: add some missing registers and defines for lcd and epwm support
[U-Boot] [i2c] Pull request
2013-08-06 15:19 UTC (2+ messages)
[U-Boot] [PATCH V2] ARM: mxs: tools: Add mkimage support for MXS bootstream
2013-08-06 14:54 UTC
[U-Boot] [PATCH v6 0/2] Add Arndale board support
2013-08-06 14:35 UTC (3+ messages)
` [U-Boot] [PATCH v6 1/2] exynos5250: Add arndale "
` [U-Boot] [PATCH v6 2/2] exynos5250: arndale: Add mmc support
[U-Boot] [PATCH v4 0/2] Add Arndale board support
2013-08-06 14:28 UTC (4+ messages)
` [U-Boot] [PATCH v4 1/2] exynos5250: Add arndale "
[U-Boot] [PATCH v5 0/2] Add Arndale board support
2013-08-06 14:26 UTC (3+ messages)
` [U-Boot] [PATCH v5 1/2] exynos5250: Add arndale "
` [U-Boot] [PATCH v5 2/2] exynos5250: arndale: Add mmc support
[U-Boot] [PATCH] ARM: mxs: tools: Add mkimage support for MXS bootstream
2013-08-06 14:22 UTC (3+ messages)
[U-Boot] [PATCH 0/4] ARM: OMAP4: Add OMAP4470 support
2013-08-06 14:21 UTC (6+ messages)
` [U-Boot] [PATCH 1/4] ARM: OMAP4470: Add OMAP4470 identification
` [U-Boot] [PATCH 2/4] ARM: OMAP4470: Add voltage and dpll data
` [U-Boot] [PATCH 3/4] ARM: OMAP4470: Add Elpida EDB8164B3PF memory configuration
` [U-Boot] [PATCH 4/4] ARM: OMAP4460: sdp: Limit TPS mux config to 4460
[U-Boot] [RESEND PATCH v5 2/2] socfpga: Adding pin mux handoff files
2013-08-06 14:10 UTC
[U-Boot] [RESEND PATCH v6 1/2] socfpga: Adding System Manager driver
2013-08-06 14:10 UTC
[U-Boot] [RESEND PATCH v5 1/1] socfpga: Creating driver for Reset Manager
2013-08-06 14:09 UTC
[U-Boot] [RESEND PATCH v5 1/1] socfpga: Adding configuration for development kit
2013-08-06 14:08 UTC
[U-Boot] [RFC PATCH 0/2] Moving ARM DCC from stdio to serial
2013-08-06 13:17 UTC (3+ messages)
` [U-Boot] [RFC PATCH 1/2] serial: arm_dcc: Remove stdio structure support
` [U-Boot] [RFC PATCH 2/2] serial: arm_dcc: Register with serial core
[U-Boot] [PATCH] omap: emif: Set initial DDR PHY config first
2013-08-06 13:16 UTC
[U-Boot] [PATCH 2/2] arm: goni: remove config.mk file
2013-08-06 11:57 UTC (6+ messages)
` [U-Boot] [PATCH 2/2 v2] "
[U-Boot] [PATCH 1/2] arm: smdkc100: remove config.mk file
2013-08-06 11:57 UTC (2+ messages)
` [U-Boot] [PATCH 1/2 v2] "
[U-Boot] [RFC 00/10] New board-specific USB initialization interface
2013-08-06 11:40 UTC (12+ messages)
` [U-Boot] [RFC 01/10] "
` [U-Boot] [RFC 02/10] nvidia, tegra: new USB hardware init interface
` [U-Boot] [RFC 03/10] Voipac PXA270: "
` [U-Boot] [RFC 04/10] Trizeps IV: "
` [U-Boot] [RFC 05/10] Colibri PXA270: "
` [U-Boot] [RFC 06/10] icpdas lp8x4x: "
` [U-Boot] [RFC 07/10] esd pmc440: "
` [U-Boot] [RFC 08/10] esd apc405: "
` [U-Boot] [RFC 09/10] balloon3: "
` [U-Boot] [RFC 10/10] canyonlands: "
[U-Boot] [PATCH] wandboard: add pxe support, set default boot command like highbank
2013-08-06 11:37 UTC (29+ messages)
[U-Boot] Unified u-boot feature set for simpler distro support
2013-08-06 11:34 UTC (26+ messages)
[U-Boot] [PATCH] arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12
2013-08-06 11:24 UTC (2+ messages)
[U-Boot] [u-boot][RFC v1] sdp4430: Enable Falcon boot mode for mmc (RAW and FAT)
2013-08-06 11:05 UTC
[U-Boot] [u-boot][RFC v1] sdp4430: Initialize board id using CONFIG_MACH_TYPE
2013-08-06 11:03 UTC
[U-Boot] [PATCH] DFU: fix for raw data write
2013-08-06 10:51 UTC (2+ messages)
[U-Boot] [PATCH RESEND 0/5] arm:goni: Update GONI configuration
2013-08-06 10:50 UTC (6+ messages)
` [U-Boot] [PATCH RESEND 1/5] arm:goni: Update configuration for goni target
` [U-Boot] [PATCH RESEND 2/5] arm:goni:dfu Add support for DFU at GONI target
` [U-Boot] [PATCH RESEND 3/5] arm:goni: Add support for USB mass storage
` [U-Boot] [PATCH RESEND 4/5] trats: new USB hardware init interface
` [U-Boot] [PATCH RESEND 5/5] arm:goni: Update of GONI partitioning scheme at eMMC
[U-Boot] [u-boot][RFC v1] mmc: Remove unused variable backup from mmc_send_cmd()
2013-08-06 10:50 UTC
[U-Boot] [u-boot][RFC v1] ARMV7: OMAP4+: Fix boot issues when using Alternative Boot operation mode
2013-08-06 10:47 UTC
[U-Boot] [u-boot][RFC v1] omap_hsmmc: omap4+/am335x: modify MMC controller internal fsm reset func
2013-08-06 10:44 UTC
[U-Boot] [PATCH] Origen: Set FIMD as the default display path
2013-08-06 10:40 UTC (6+ messages)
[U-Boot] [PATCH 0/3] MTD & UBI fixes
2013-08-06 10:13 UTC (4+ messages)
` [U-Boot] [PATCH 1/3] mtd: driver _read() returns max_bitflips; mtd_read() returns -EUCLEAN
` [U-Boot] [PATCH 2/3] cmd_mtdparts: use 64 bits for flash size, partition size & offset
` [U-Boot] [PATCH 3/3] cmd_ubi: add write.part command, to write a volume in multiple parts
[U-Boot] [PATCH v1 0/4] mtd: nand: omap: optimize and clean-up of OMAP NAND driver
2013-08-06 9:55 UTC (5+ messages)
` [U-Boot] [PATCH v1 1/4] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform
` [U-Boot] [PATCH v1 2/4] mtd: nand: omap: optimize chip->ecc.hwctl() for H/W ECC schemes
` [U-Boot] [PATCH v1 3/4] mtd: nand: omap: optimize chip->ecc.calculate() "
` [U-Boot] [PATCH v1 4/4] mtd: nand: omap: optimized chip->ecc.correct() "
[U-Boot] [PATCH v1 1/2] am33xx: enable GPMC clocks for TI814x
2013-08-06 9:40 UTC (2+ messages)
` [U-Boot] [PATCH v1 2/2] ti814x_evm: enable support for NAND
[U-Boot] [PATCH v1 1/2] am33xx: enable GPMC clocks for TI814x
2013-08-06 8:15 UTC (2+ messages)
` [U-Boot] [PATCH v1 2/2] ti814x_evm: enable support for NAND
[U-Boot] [PATCH v3 0/9] Bring in new I2C framework
2013-08-05 23:18 UTC (29+ messages)
` [U-Boot] [PATCH v3 8/9] tegra: i2c: Enable new CONFIG_SYS_I2C framework
[U-Boot] [PATCH V3 00/20] Make mv_udc work for i.mx6
2013-08-05 20:15 UTC (9+ messages)
` [U-Boot] [PATCH V3 01/20] Add functions for use with i.mx6 otg udc
[U-Boot] [PATCH 1/2] nds32: introduce DMA allocation API
2013-08-05 17:00 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] nds32: fix the missing COBJS-y change
[U-Boot] [PATCH 00/10] Introduce common config file for TI ARMv7 platforms
2013-08-05 15:53 UTC (11+ messages)
` [U-Boot] [PATCH 01/10] am33xx: Move V_OSCK/V_SCLK to <asm/arch-am33xx/clocks_am33xx.h>
` [U-Boot] [PATCH 05/10] arm: spl: For Falcon Mode, set a default machid of ~0
[U-Boot] [RFC] [PATCH 0/5] Refactor MAINTAINERS file
2013-08-05 14:28 UTC (4+ messages)
` [U-Boot] [RFC V2 0/9] "
[U-Boot] [PATCH 0/4] arm, da850: add ipam390 board support
2013-08-05 14:00 UTC (5+ messages)
` [U-Boot] [PATCH 1/4] arm/davinci/da850: add uart0_pins_rtscts and RMII_MHz_50_CLK in emac_pins_rmii pinmux
` [U-Boot] [PATCH 2/4] bootstage: get more BOOTSTAGE_ID* in show_boot_progress()
` [U-Boot] [PATCH 3/4] arm, da850: enable the correct uart in arch_cpu_init()
` [U-Boot] [PATCH 4/4] arm, da850: add ipam390 board support
[U-Boot] [PATCH 2/2]powerpc/fdt: Modify USB device-tree fixup for erratum-A006918
2013-08-05 10:43 UTC
[U-Boot] [PATCH 1/2]powerpc/usb: Workaround for erratum-A006918
2013-08-05 10:43 UTC
[U-Boot] [PATCH] powerpc/usb: Depricate usb_phy_type and usb_dr_mode uboot env variables
2013-08-05 10:32 UTC
[U-Boot] [PATCH]fsl/usb: Move USB internal phy definitions to fsl_usb.h
2013-08-05 10:30 UTC
[U-Boot] [U-Boot, RFC] ext4fs: le32_to_cpu() used on a 16-bit field
2013-08-05 7:31 UTC (2+ messages)
[U-Boot] [PATCH v3 0/7] ARMv7: Add HYP mode switching support
2013-08-05 5:15 UTC (3+ messages)
` [U-Boot] [PATCH v3 6/7] ARM: extend non-secure switch to also go into HYP mode
[U-Boot] [PATCH RESEND] exynos: video: change mipi dsi write function parameters correctly
2013-08-05 4:34 UTC
[U-Boot] [PATCH] bootm: fix conditional controlling call to fixup_silent_linux
2013-08-05 4:14 UTC (5+ messages)
[U-Boot] [PATCH] ARM: omap24xx: remove remainders of dead board
2013-08-05 1:49 UTC
[U-Boot] [PATCH] gpio: altera_pio: Fix inversed logic of gpio_is_valid() implementation
2013-08-05 0:26 UTC (3+ messages)
[U-Boot] [PATCH 01/12] sf: Divide spi_flash into multiple parts
2013-08-04 21:20 UTC (12+ messages)
` [U-Boot] [PATCH 02/12] sf: probe: Add new spi_flash_probe support
` [U-Boot] [PATCH 03/12] sf: probe: Update sector_size for N25Q* parts
` [U-Boot] [PATCH 04/12] sf: probe: Add support for M25P* flash parts
` [U-Boot] [PATCH 05/12] sf: probe: Update sector_size for M25P* parts
` [U-Boot] [PATCH 06/12] sf: probe: Add support for EN25Q* flash parts
` [U-Boot] [PATCH 07/12] sf: probe: Add support for GD25* "
` [U-Boot] [PATCH 08/12] sf: probe: Add support for MX25L* "
` [U-Boot] [PATCH 09/12] sf: probe: Add support for W25* "
` [U-Boot] [PATCH 10/12] sf: probe: Update sector_size for W25* parts
` [U-Boot] [PATCH 11/12] sf: probe: Add support for S25FL* flash parts
` [U-Boot] [PATCH 12/12] sf: probe: Update sector_size for S25FL* parts
[U-Boot] [PATCH 00/12] sf: Add common probe support
2013-08-04 21:20 UTC
[U-Boot] Mac address warning
2013-08-04 20:37 UTC (5+ messages)
[U-Boot] bootstopkey reason behind it
2013-08-04 20:21 UTC (2+ messages)
[U-Boot] Implement AUART for i.MX28
2013-08-04 11:10 UTC (5+ messages)
[U-Boot] [PATCH 0/6 V2] EXYNOS: I2S: Enable I2S0 channel
2013-08-04 6:44 UTC (7+ messages)
` [U-Boot] [PATCH 1/6 V2] Sound: WM8994: Support "
` [U-Boot] [PATCH 2/6 V2] DTS: Addition of I2S0 channel and replacing I2S1
` [U-Boot] [PATCH 3/6 V2] ARM: Change from I2S1 to I2S0 for audio on SMDK5250
` [U-Boot] [PATCH 4/6 V2] Sound: I2S: Replacing I2S1 with I2S0 channel
` [U-Boot] [PATCH 5/6 V2] DTS: Addition of GPIO chipselect for MAX98095
` [U-Boot] [PATCH 6/6 V2] Sound: MAX98095: Support I2S0 channel
[U-Boot] [RESEND PATCH v2 1/6] sf: eon|spansion|ramtron: Fix code cleanup
2013-08-04 5:48 UTC (6+ messages)
` [U-Boot] [RESEND PATCH v2 2/6] sf: sst: "
` [U-Boot] [RESEND PATCH v2 3/6] sf: stmicro: "
` [U-Boot] [RESEND PATCH v2 4/6] sf: "
` [U-Boot] [RESEND PATCH v2 5/6] cmd_sf|env_sf: "
` [U-Boot] [RESEND PATCH v2 6/6] sf: Fix code cleanups
[U-Boot] [RESEND PATCH v2 0/6] sf: Code cleanup patch set
2013-08-04 5:48 UTC
[U-Boot] [PATCH v2 0/6] sf: Code cleanup patch set
2013-08-04 5:34 UTC (2+ messages)
[U-Boot] [PATCH 1/3] spi: Add zynq qspi controller driver
2013-08-03 20:45 UTC (3+ messages)
` [U-Boot] [PATCH 2/3] zynq: Enable CONFIG_ZYNQ_QSPI
` [U-Boot] [PATCH 3/3] zynq: Define CONFIG_SPI_FLASH_BAR
[U-Boot] [PATCH 0/3] spi: Add zynq qspi controller
2013-08-03 20:45 UTC
[U-Boot] [PATCH V2 REPOST 0/9] rely on latest dtc, simplify
2013-08-03 19:30 UTC (2+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox