messages from 2013-09-18 00:42:16 to 2013-09-20 03:29:24 UTC [more...]
[U-Boot] [PATCH V4 00/17] Make mv_udc work for i.mx6
2013-09-20 3:29 UTC (2+ messages)
` [U-Boot] [PATCH V4 01/17] usb: gadget: mv_udc: don't check CONFIG_USB_MAX_CONTROLLER_COUNT
[U-Boot] [UBOOT][PATCHv3 0/7] mtd/spi: add quad/memory mapped read support, add ti qspi controller
2013-09-20 2:51 UTC (9+ messages)
` [U-Boot] [UBOOT][PATCHv3 1/7] omap5: add qspi support
` [U-Boot] [UBOOT][PATCHv3 2/7] armv7: hw_data: change clock divider setting
` [U-Boot] [UBOOT][PATCHv3 3/7] drivers: mtd: :spi: Add quad read support
` [U-Boot] [UBOOT][PATCHv3 4/7] driver: mtd: spi: Add memory mapped "
` [U-Boot] [UBOOT][PATCHv3 5/7] spi: add TI QSPI driver
` [U-Boot] [UBOOT][PATCHv3 6/7] dra7xx_evm: add SPL API, QSPI, and serial flash support
` [U-Boot] [UBOOT][PATCHv3 7/7] README: qspi usecase and testing documentation
[U-Boot] [PATCH v5 0/8] ARMv7: Add HYP mode switching support
2013-09-20 2:38 UTC (26+ messages)
` [U-Boot] [PATCH v5 1/8] ARM: prepare armv7.h to be included from assembly source
` [U-Boot] [PATCH v5 2/8] ARM: add secure monitor handler to switch to non-secure state
` [U-Boot] [PATCH v5 3/8] ARM: add assembly routine "
` [U-Boot] [PATCH v5 4/8] ARM: add C function "
` [U-Boot] [PATCH v5 5/8] ARM: trigger non-secure state switch during bootm execution
` [U-Boot] [PATCH v5 6/8] ARM: add SMP support for non-secure switch
` [U-Boot] [PATCH v5 7/8] ARM: extend non-secure switch to also go into HYP mode
` [U-Boot] [PATCH v5 8/8] ARM: VExpress: enable ARMv7 virt support for VExpress A15
[U-Boot] [PATCH v2 1/3] serial: sh: Add support R8A7790
2013-09-20 1:53 UTC (3+ messages)
` [U-Boot] [PATCH v2 2/3] arm: rmobile: Add support r8a7790
` [U-Boot] [PATCH v2 3/3] arm: rmobile: Add support lager board
[U-Boot] [PATCH] usb: ehci: Fix test mode for connected ports
2013-09-20 1:39 UTC (6+ messages)
[U-Boot] [PATCH 1/2] arm: rmobile: kzm9g: Change clock definition of SCIF from CONFIG_SYS_CLK_FREQ to CONFIG_SH_SCIF_CLK_FREQ
2013-09-20 0:21 UTC (3+ messages)
[U-Boot] [PATCH 1/3] serial: sh: Add support R8A7790
2013-09-20 0:11 UTC (4+ messages)
` [U-Boot] [PATCH 3/3] arm: rmobile: Add support lager board
[U-Boot] U-boot PPC405EX with DDR2 DIMM
2013-09-19 23:44 UTC (2+ messages)
[U-Boot] [PATCH] ARM: mxs: Setup stack in JTAG mode
2013-09-19 23:36 UTC
[U-Boot] [RFC 5/5] B4860QDS: Add support of 2 stage NAND boot loader
2013-09-19 23:21 UTC (4+ messages)
[U-Boot] [PATCH v2] socfpga: Adding Freeze Controller driver
2013-09-19 22:55 UTC (2+ messages)
[U-Boot] [PATCH] config: consolidate CONFIG_SYS_HZ definition
2013-09-19 22:13 UTC (7+ messages)
[U-Boot] How do ARM platform initialize DDR?
2013-09-19 21:49 UTC (11+ messages)
[U-Boot] [PATCH] arm: prevent using movt/movw address loads
2013-09-19 21:16 UTC (2+ messages)
[U-Boot] NAND flash question
2013-09-19 20:25 UTC (2+ messages)
[U-Boot] [PATCH v3 0/3] i2c, mxc: switch to new multibus/multiadapter framework
2013-09-19 18:42 UTC (4+ messages)
` [U-Boot] [PATCH v3 1/3] i2c: fix init on generic board
` [U-Boot] [PATCH v3 2/3] i2c: mxc: move to new subsystem
` [U-Boot] [PATCH v3 3/3] i2c: update config using mxc driver "
[U-Boot] [PATCH v1 2/2] ti814x_evm: enable support for NAND
2013-09-19 18:09 UTC (2+ messages)
[U-Boot] [PATCH v2] FIT: delete unnecessary casts
2013-09-19 17:22 UTC (2+ messages)
[U-Boot] gpmi-nand driver and jffs2 support
2013-09-19 17:20 UTC (7+ messages)
[U-Boot] [PATCH 0/3] ARM: use r9 for gd instead of r8
2013-09-19 16:54 UTC (6+ messages)
` [U-Boot] [PATCH v2 0/4] "
` [U-Boot] [PATCH v2 1/4] ARM: make reserving the gd register a make variable
[U-Boot] Annoying make debug messages at v2013.10-rc3
2013-09-19 16:02 UTC (6+ messages)
[U-Boot] [PATCH v3 02/28] sf: probe: Add new spi_flash_probe support
2013-09-19 15:58 UTC (4+ messages)
[U-Boot] [PATCH 00/12 V3] EXYNOS5420: Add SMDK5420 board support
2013-09-19 15:56 UTC (30+ messages)
` [U-Boot] [PATCH 01/12 V3] EXYNOS5: Create a common board file
` [U-Boot] [PATCH 02/12 V3] Exynos5420: Add base addresses for 5420
` [U-Boot] [PATCH 03/12 V3] Exynos5420: Add clock initialization "
` [U-Boot] [PATCH 04/12 V3] Exynos5420: Add DDR3 "
` [U-Boot] [PATCH 05/12 V3] Exynos5420: Modify TZPC init to support 5420
` [U-Boot] [PATCH 06/12 V3] Exynos5420: Alter UNCON and UFCON for 5420
` [U-Boot] [PATCH 07/12 V3] Exynos5420: Add support for 5420 in pinmux and gpio
` [U-Boot] [PATCH 08/12 V3] Exynos5420: Add base patch for SMDK5420
` [U-Boot] [PATCH 09/12 V3] DTS: Add dts support "
` [U-Boot] [PATCH 10/12 V3] Config: Add initial config "
` [U-Boot] [PATCH 11/12 V3] SPL: EXYNOS: Prepare for variable size SPL support
` [U-Boot] [PATCH 12/12 V3] DWMMC: SMDK5420: Disable SMU for eMMC
[U-Boot] [PATCH] mx6: compute PLL PFD frequencies rather than using defines
2013-09-19 15:48 UTC (2+ messages)
` [U-Boot] [PATCH V2] "
[U-Boot] [PATCH v2 1/2] ARM: IGEP0033: rename config file to am335x_igep0033.h
2013-09-19 15:14 UTC (7+ messages)
` [U-Boot] [PATCH v2 2/2] OMAP3: igep00x0: rename config file to omap3_igep00x0.h
[U-Boot] [PATCH] socfpga: Adding Freeze Controller driver
2013-09-19 15:13 UTC (3+ messages)
[U-Boot] How the ORx in MPC8641d soc Registers are filled?
2013-09-19 15:13 UTC
[U-Boot] [PATCH] doc: README.mxsimage: Use mkimage provided by U-boot
2013-09-19 14:48 UTC (5+ messages)
[U-Boot] [RFC 00/10] New board-specific USB initialization interface
2013-09-19 14:34 UTC (7+ messages)
` [U-Boot] [PATCH v4] usb: new board-specific USB init interface
[U-Boot] [PATCH] mx6sabresd: Fix the fdt file for the mx6dl version
2013-09-19 14:01 UTC (5+ messages)
[U-Boot] [PATCH] Makefile: Do not show make debug messages
2013-09-19 13:41 UTC (3+ messages)
[U-Boot] [PATCH 3/4] dumpimage: Added a tool to extract "data files" from U-Boot multifile images
2013-09-19 11:53 UTC (4+ messages)
[U-Boot] i2c:zynq: I2C multi-bus support on Zynq
2013-09-19 9:29 UTC (3+ messages)
[U-Boot] [PATCH 0/4] ARM: s3c44b0: remove remainders of dead board
2013-09-19 8:53 UTC (2+ messages)
[U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
2013-09-19 8:31 UTC
[U-Boot] [PATCH V2] arm: atmel: cpux9k2: increase malloc space to fix crash on start u-boot
2013-09-19 8:28 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH V3 0/3] Introduce Samsung's new board Trats2
2013-09-19 8:14 UTC (5+ messages)
` [U-Boot] [PATCH V5 "
` [U-Boot] [PATCH V5 1/3] power:battery: add battery support for Trats2 board
` [U-Boot] [PATCH V5 2/3] samsung:common:i2c: add definions for third soft I2C adapter "
` [U-Boot] [PATCH V5 3/3] samsung: trats2: add support for new board Trats2
[U-Boot] [PATCH] buildman: fix boards.cfg parsing
2013-09-19 8:08 UTC
[U-Boot] [PATCH v2 0/3] i2c, mxc: switch to new multibus/multiadapter framework
2013-09-19 6:54 UTC (5+ messages)
` [U-Boot] [PATCH v2 1/3] i2c: fix init on generic board
` [U-Boot] [PATCH v2 2/3] i2c: move to new subsystem
` [U-Boot] [PATCH v2 3/3] i2c: update config using mxc driver "
[U-Boot] [PATCH v2] Merge and reformat boards.cfg and MAINTAINERS
2013-09-19 6:29 UTC (4+ messages)
[U-Boot] [Exynos 5250 Query] Smp Boot
2013-09-19 3:22 UTC (7+ messages)
[U-Boot] [PATCH] FIT: delete unnecessary casts
2013-09-19 3:14 UTC (3+ messages)
[U-Boot] Understanding uboot child makefiles
2013-09-19 2:46 UTC (3+ messages)
[U-Boot] [PATCH 4/4] sandbox: dumpimage: Test dumpimage
2013-09-19 2:44 UTC (2+ messages)
[U-Boot] [PATCH 2/4] tools: moved code common to all image tools to a separated module
2013-09-19 2:40 UTC (2+ messages)
[U-Boot] [PATCH 1/4] mkimage: added 'static' specifier to match function's prototype
2013-09-19 2:33 UTC (2+ messages)
[U-Boot] [PATCH] cosmetic: FIT: fix typos in comments
2013-09-19 2:29 UTC (2+ messages)
[U-Boot] [U-boot] Some questions about BootStage functions
2013-09-19 2:22 UTC (2+ messages)
[U-Boot] [PATCH] Fix numerous misspellings of "redundand" and "REDUNDAND"
2013-09-19 2:20 UTC (2+ messages)
[U-Boot] [PATCH] cosmetic: doc: uImage.FIT: fix typos
2013-09-19 2:14 UTC (2+ messages)
[U-Boot] [PATCH v3 00/28] sf: Add common probe support
2013-09-18 17:31 UTC (2+ messages)
[U-Boot] [PATCH] arm: atmel: cpux9k2: increase malloc space to fix crash on start u-boot
2013-09-18 15:56 UTC (3+ messages)
[U-Boot] [PATCH v2] net: fec_mxc: Fix timeouts during tftp transfer
2013-09-18 15:32 UTC (2+ messages)
[U-Boot] [RESEND PATCH v6 2/2] socfpga: Adding pin mux handoff files
2013-09-18 15:29 UTC (2+ messages)
[U-Boot] [RESEND PATCH v7 1/2] socfpga: Adding System Manager driver
2013-09-18 15:28 UTC (2+ messages)
[U-Boot] [PATCH v5 0/3] dfu ram support
2013-09-18 15:11 UTC (2+ messages)
[U-Boot] [PATCH] i2c:zynq: I2C multi-bus support on Zynq
2013-09-18 15:01 UTC (3+ messages)
[U-Boot] (Intro) i2c:zynq: I2C multi-bus support on Zynq
2013-09-18 14:59 UTC (3+ messages)
[U-Boot] [RFC 4/5] SPL:Defines function required to env read for IFC & env_nand
2013-09-18 11:10 UTC (3+ messages)
[U-Boot] [PATCH v11 0/6] arm64 patch
2013-09-18 9:19 UTC (7+ messages)
` [U-Boot] [PATCH v11 1/6] core support of arm64
` [U-Boot] [PATCH v11 2/6] board support of vexpress_aemv8a
` [U-Boot] [PATCH v11 3/6] generic board patch of manual reloc and zero gd_t
` [U-Boot] [PATCH v11 4/6] 64bit initrd start address support
` [U-Boot] [PATCH v11 5/6] remove compiling warnings
` [U-Boot] [PATCH v11 6/6] add weak entry definition
[U-Boot] [PATCH 1/3] arm/km: add support for km_kirkwood_128m16 board
2013-09-18 7:32 UTC (2+ messages)
` [U-Boot] [PATCH v2 "
[U-Boot] [PATCH] net: macb: get DMA bus width from design config register
2013-09-18 7:07 UTC
[U-Boot] [PATCH 1/4] powerpc/83xx: remove staticness for qe_iop_conf_tab
2013-09-18 6:44 UTC (2+ messages)
[U-Boot] [RFC 0/5] powerpc: Add support 2 stage boot loader for corenet platform
2013-09-18 6:38 UTC (2+ messages)
[U-Boot] [RFD] OMAP5: Working HYP mode
2013-09-18 6:35 UTC (3+ messages)
` [U-Boot] [PATCH] HACK: enable HYP mode on OMAP5
[U-Boot] [PATCH 0/5] Add device tree support for VxWorks
2013-09-18 6:14 UTC (3+ messages)
` [U-Boot] [PATCH v2 "
[U-Boot] [PATCH v4 0/3] dfu ram support
2013-09-18 2:59 UTC (4+ messages)
` [U-Boot] [PATCH v4 2/3] dfu: "
[U-Boot] [U-boot] Some questions about BootStage functions
2013-09-18 2:06 UTC (3+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox