messages from 2013-09-19 19:26:14 to 2013-09-22 01:56:02 UTC [more...]
[U-Boot] [PATCH] powerpc/B4860: enable PBL tool for B4860
2013-09-22 1:56 UTC
[U-Boot] [PATCH v12 0/6] arm64 patch
2013-09-22 1:37 UTC (7+ messages)
` [U-Boot] [PATCH v12 1/6] core support of arm64
` [U-Boot] [PATCH v12 2/6] board support of vexpress_aemv8a
` [U-Boot] [PATCH v12 3/6] generic board patch of manual reloc and zero gd_t
` [U-Boot] [PATCH v12 4/6] 64bit initrd start address support
` [U-Boot] [PATCH v12 5/6] remove compiling warnings
` [U-Boot] [PATCH v12 6/6] add weak entry definition
[U-Boot] [PATCH] powerpc/c29xpcie: Getting DDR SPD image from 16-bit sub-address EEPROM
2013-09-22 1:31 UTC (3+ messages)
` [U-Boot] [PATCH v2] "
[U-Boot] [PATCH] config: consolidate CONFIG_SYS_HZ definition
2013-09-21 20:03 UTC (8+ messages)
` [U-Boot] [PATCH v2] "
[U-Boot] [PATCH v3 02/28] sf: probe: Add new spi_flash_probe support
2013-09-21 18:59 UTC (6+ messages)
` [U-Boot] [PATCH v3 07/28] sf: probe: Add support for W25* flash parts
` [U-Boot] [PATCH v3 14/28] sf: probe: Add support for erase sector selection flag
[U-Boot] [PATCH v4 0/3] i2c, mxc: switch to new multibus/multiadapter framework
2013-09-21 16:13 UTC (4+ messages)
` [U-Boot] [PATCH v4 1/3] i2c: fix init on generic board
` [U-Boot] [PATCH v4 2/3] i2c: mxc: move to new subsystem
` [U-Boot] [PATCH v4 3/3] i2c: update config using mxc driver "
[U-Boot] About patch "S3C24XX: Add support to MINI2416 board"
2013-09-21 15:56 UTC (2+ messages)
[U-Boot] [PATCH 0/3] ARM: use r9 for gd instead of r8
2013-09-21 15:30 UTC (6+ messages)
` [U-Boot] [PATCH v3 "
` [U-Boot] [PATCH v3 1/3] ARM,relocate: do not use r9
` [U-Boot] [PATCH v3 2/3] ARM: use r9 for gd
` [U-Boot] [PATCH v3 3/3] README: update ARM register usage
[U-Boot] [PATCH] buildman: fix boards.cfg parsing
2013-09-21 12:07 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH v2] FIT: delete unnecessary casts
2013-09-21 12:07 UTC (3+ messages)
` [U-Boot] [U-Boot,v2] "
[U-Boot] [PATCH] Makefile: Do not show make debug messages
2013-09-21 12:07 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] cosmetic: FIT: fix typos in comments
2013-09-21 12:07 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] SPDX: fix IBM-pibs license identifier
2013-09-21 12:07 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] arm: omap5: echi: Add GPL-2.0+ SPDX-License-Identifier
2013-09-21 12:07 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH v2] Cosmetic: Fix a number of typos, no functional changes
2013-09-21 12:07 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH] git-mailrc: Update SPI custodian
2013-09-21 12:07 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] Cosmetic: Update some info in the README "arch" section
2013-09-21 12:06 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] cosmetic: doc: uImage.FIT: fix typos
2013-09-21 12:06 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] boards.cfg: show info about boards.cfg instead of MAINTAINERS
2013-09-21 12:06 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] boards.cfg: Fix the comment for invoking tools/reformat.py from vim
2013-09-21 12:06 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH 1/6] part_efi: make sure the gpt_pte is freed
2013-09-21 12:06 UTC (2+ messages)
` [U-Boot] [U-Boot,1/6] "
[U-Boot] [PATCH v2] Fix loading freeze when netconsole is active
2013-09-21 12:06 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH] bootm: use BOOTM_STATE_OS_CMDLINE flag for plain bootm
2013-09-21 12:06 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] Fix some obvious typoes across multiple subsystems
2013-09-21 12:06 UTC (2+ messages)
` [U-Boot] Fix some obvious typos "
[U-Boot] Please pull u-boot-ti/master
2013-09-21 12:06 UTC
[U-Boot] Pull request: u-boot-mmc #2
2013-09-21 12:05 UTC (2+ messages)
[U-Boot] [PULL] u-boot-atmel/master -> u-boot-arm/master
2013-09-21 10:38 UTC (2+ messages)
[U-Boot] [PATCH 1/2] arm: rmobile: kzm9g: Change clock definition of SCIF from CONFIG_SYS_CLK_FREQ to CONFIG_SH_SCIF_CLK_FREQ
2013-09-21 8:47 UTC (4+ messages)
[U-Boot] [PATCH] arm: prevent using movt/movw address loads
2013-09-21 2:43 UTC (5+ messages)
[U-Boot] [PATCH 00/12 V3] EXYNOS5420: Add SMDK5420 board support
2013-09-21 2:41 UTC (7+ messages)
` [U-Boot] [PATCH 01/12 V3] EXYNOS5: Create a common board file
` [U-Boot] [PATCH 05/12 V3] Exynos5420: Modify TZPC init to support 5420
[U-Boot] [PATCH v3 0/3] i2c, mxc: switch to new multibus/multiadapter framework
2013-09-21 2:00 UTC (3+ messages)
` [U-Boot] [PATCH v3 1/3] i2c: fix init on generic board
[U-Boot] [PATCH v3 1/2] ARM: IGEP0033: rename config file to am335x_igep0033.h
2013-09-21 1:04 UTC (4+ messages)
` [U-Boot] [PATCH v3 2/2] OMAP3: igep00x0: rename config file to omap3_igep00x0.h
[U-Boot] [PATCH V4 00/17] Make mv_udc work for i.mx6
2013-09-21 0:25 UTC (38+ messages)
` [U-Boot] [PATCH V4 01/17] usb: gadget: mv_udc: don't check CONFIG_USB_MAX_CONTROLLER_COUNT
` [U-Boot] [PATCH V4 02/17] usb: ehci-mx6: add support for host mode otg port
` [U-Boot] [PATCH V4 03/17] usb: gadget: ether set wMaxPacketSize
` [U-Boot] [PATCH V4 04/17] usb: gadget: ether: return error from rx_submit if no request
` [U-Boot] [PATCH V4 05/17] usb: gadget: mv_udc: split mv_udc.h file
` [U-Boot] [PATCH V4 06/17] usb: udc: add udc.h include file
` [U-Boot] [PATCH V4 07/17] usb: gadget: mv_udc: fix typo in error message
` [U-Boot] [PATCH V4 08/17] usb: gadget: mv_udc: set is_dualspeed = 1
` [U-Boot] [PATCH V4 09/17] usb: gadget: mv_udc: fix full speed connections
` [U-Boot] [PATCH V4 10/17] usb: gadget: mv_udc: optimize bounce
` [U-Boot] [PATCH V4 11/17] usb: gadget: mv_udc: flush item before head
` [U-Boot] [PATCH V4 12/17] usb: gadget: mv_udc: optimize ep_enable
` [U-Boot] [PATCH V4 13/17] usb: gadget: mv_udc: zero transfer descriptor memory on probe
` [U-Boot] [PATCH V4 14/17] usb: gadget: mv_udc: clear desc upon ep_disable
` [U-Boot] [PATCH V4 15/17] mx6: iomux: add GPR1 defines for use with nitrogen6x
` [U-Boot] [PATCH V4 16/17] nitrogen6x: add otg usb host/device mode support
` [U-Boot] [PATCH V4 17/17] nitrogen6x: add CONFIG_MV_UDC
[U-Boot] [RFC PATCH 0/3] i.MX6 (DQ/DLS): consolidate mux and pad names
2013-09-21 0:22 UTC (2+ messages)
[U-Boot] [PATCH] i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID
2013-09-21 0:18 UTC
[U-Boot] [PATCH] i2c:zynq: I2C multi-bus support on Zynq
2013-09-20 20:40 UTC
[U-Boot] [PATCH 1/3] mx28evk: Propagate the error if cpu_eth_init() fails
2013-09-20 19:30 UTC (3+ messages)
` [U-Boot] [PATCH 2/3] "
` [U-Boot] [PATCH 3/3] mx35pdk: Fix error handling in board_late_init()
[U-Boot] [PATCH] tools/imximage.c: Fix compiling warning
2013-09-20 19:24 UTC
[U-Boot] [PATCH 1/2] ARM: tegra: support SKU b1 of Tegra30
2013-09-20 17:57 UTC (5+ messages)
[U-Boot] [PATCH v3] powerpc/p1010rdb: update readme for p1010rdb-pb board
2013-09-20 17:42 UTC (2+ messages)
[U-Boot] [PATCH] Tegra114: Fix PLLX M, N, P init settings
2013-09-20 16:33 UTC (4+ messages)
[U-Boot] [PATCH] wandboard: Use imx6dl-wandboard.dtb for the solo version
2013-09-20 16:12 UTC (2+ messages)
[U-Boot] [PATCH v2] net: fec_mxc: Fix timeouts during tftp transfer
2013-09-20 16:11 UTC (2+ messages)
[U-Boot] [PATCH] mx6sabresd: Fix the fdt file for the mx6dl version
2013-09-20 16:11 UTC (7+ messages)
[U-Boot] [PATCH v3] doc: README.mxs: Add instruction to install 'libssl-dev'
2013-09-20 16:10 UTC (2+ messages)
[U-Boot] [PATCH] mx28evk: Fix checkpatch warning
2013-09-20 16:09 UTC (2+ messages)
[U-Boot] [PATCH] i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10
2013-09-20 16:09 UTC (2+ messages)
[U-Boot] [PATCH v2 1/2] net: fec_mxc: Add support for mx6 solo-lite
2013-09-20 16:08 UTC (3+ messages)
` [U-Boot] [PATCH v2 2/2] mx6slevk: Add Ethernet support
[U-Boot] [PATCH 1/2] net: fec_mxc: Add support for mx6 solo-lite
2013-09-20 16:07 UTC (2+ messages)
[U-Boot] [PATCH 1/2] mx6sabresd: Return error if cpu_eth_init() fails
2013-09-20 16:07 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] mx6qsabreauto: "
[U-Boot] [PATCH] mx35pdk: Remove CONFIG_SYS_CACHELINE_SIZE
2013-09-20 16:04 UTC (2+ messages)
[U-Boot] [PATCH] mmc: fsl_esdhc: Check the result from malloc()
2013-09-20 16:04 UTC (2+ messages)
[U-Boot] [PATCH v2 1/2] mx6sabresd: Avoid hang when HDMI cable is not connected
2013-09-20 16:03 UTC (4+ messages)
` [U-Boot] [PATCH v2 2/2] mx6sabresd: Reset counter to prevent error message
[U-Boot] [PATCH] ARM: arch-mx6: fix PLL2_PFD2_FREQ
2013-09-20 16:02 UTC (4+ messages)
[U-Boot] NAND flash question
2013-09-20 15:27 UTC (3+ messages)
[U-Boot] i.MX6SL pad declarations (was [RFC PATCH 4/3] i.MX6DQ/DLS: remove unused pad declarations)
2013-09-20 14:42 UTC
[U-Boot] Pull request: u-boot-mmc
2013-09-20 14:21 UTC (2+ messages)
[U-Boot] [PATCH] ARM: mxs: Add PPC-AG BG0900 board
2013-09-20 14:14 UTC
[U-Boot] [PATCH 1/4] net: rtl8169: Fix format string
2013-09-20 14:03 UTC (4+ messages)
` [U-Boot] [PATCH 2/4] net: rtl8169: Improve cache maintenance
` [U-Boot] [PATCH 3/4] net: rtl8169: Add support for RTL8168d/8111d
` [U-Boot] [PATCH 4/4] net: rtl8169: Add support for RTL8168evl/8111evl
[U-Boot] [PATCH] pci: Properly configure prefetchable memory region
2013-09-20 13:50 UTC
[U-Boot] [PATCH v6 (cosmetic) 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver
2013-09-20 13:47 UTC (7+ messages)
` [U-Boot] [PATCH v6 (cosmetic) 1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform
` [U-Boot] [PATCH v6 (cosmetic) 2/5] mtd: nand: omap: optimize chip->ecc.hwctl() for H/W ECC schemes
` [U-Boot] [PATCH v6 (cosmetic) 3/5] mtd: nand: omap: optimize chip->ecc.calculate() "
` [U-Boot] [PATCH v6 (cosmetic) 4/5] mtd: nand: omap: optimized chip->ecc.correct() "
` [U-Boot] [PATCH v6 (cosmetic) 5/5] board/ti/am335x/README: update for NAND boot
[U-Boot] [PATCH 1/2] image: Don't relocate ramdisk to highmem
2013-09-20 13:35 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] image: Only relocate ramdisk when necessary
[U-Boot] [PATCH] arm: ep9315: Return back Cirrus Logic EDB9315A board support
2013-09-20 13:11 UTC
[U-Boot] [PATCH V3 0/3] Introduce Samsung's new board Trats2
2013-09-20 13:01 UTC (5+ messages)
` [U-Boot] [PATCH V6 "
` [U-Boot] [PATCH V6 1/3] power:battery: add battery support for Trats2 board
` [U-Boot] [PATCH V6 2/3] samsung:common:i2c: add definions for third soft I2C adapter "
` [U-Boot] [PATCH V6 3/3] samsung: trats2: add support for new board Trats2
[U-Boot] [PATCH] arm: ep9315: Return back Cirrus Logic EDB9315A board support
2013-09-20 12:14 UTC
[U-Boot] How do ARM platform initialize DDR?
2013-09-20 7:13 UTC (8+ messages)
[U-Boot] [PATCH] usb: ehci: Fix test mode for connected ports
2013-09-20 5:12 UTC (6+ messages)
[U-Boot] [PATCH v3] socfpga: Adding Freeze Controller driver
2013-09-20 5:08 UTC
[U-Boot] [PATCH v2] socfpga: Adding Freeze Controller driver
2013-09-20 5:08 UTC (3+ messages)
[U-Boot] [RFC 5/5] B4860QDS: Add support of 2 stage NAND boot loader
2013-09-20 3:51 UTC (5+ messages)
[U-Boot] [PATCH v5 0/8] ARMv7: Add HYP mode switching support
2013-09-20 3:47 UTC (21+ messages)
` [U-Boot] [PATCH v5 2/8] ARM: add secure monitor handler to switch to non-secure state
` [U-Boot] [PATCH v5 3/8] ARM: add assembly routine "
[U-Boot] [UBOOT][PATCHv3 0/7] mtd/spi: add quad/memory mapped read support, add ti qspi controller
2013-09-20 2:51 UTC (3+ messages)
` [U-Boot] [UBOOT][PATCHv3 5/7] spi: add TI QSPI driver
[U-Boot] [PATCH v2 1/3] serial: sh: Add support R8A7790
2013-09-20 1:53 UTC (3+ messages)
` [U-Boot] [PATCH v2 2/3] arm: rmobile: Add support r8a7790
` [U-Boot] [PATCH v2 3/3] arm: rmobile: Add support lager board
[U-Boot] [PATCH 1/3] serial: sh: Add support R8A7790
2013-09-20 0:11 UTC (4+ messages)
` [U-Boot] [PATCH 3/3] arm: rmobile: Add support lager board
[U-Boot] U-boot PPC405EX with DDR2 DIMM
2013-09-19 23:44 UTC (2+ messages)
[U-Boot] [PATCH] ARM: mxs: Setup stack in JTAG mode
2013-09-19 23:36 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox