messages from 2013-10-15 04:48:18 to 2013-10-16 14:53:37 UTC [more...]
[U-Boot] Freescale P4080 DDR problems
2013-10-16 14:53 UTC
[U-Boot] [PATCH] spi: mxc: Fix data loss for non aligned write buffers
2013-10-16 14:41 UTC (8+ messages)
[U-Boot] [PATCH V2 0/6] Add support for SPI based DataImage LCD panel
2013-10-16 14:23 UTC (7+ messages)
` [U-Boot] [PATCH V2 1/6] spi: omap3: remove semicolon from #define
` [U-Boot] [PATCH V2 2/6] spi: omap3: add support for more word lengths
` [U-Boot] [PATCH V2 3/6] spi: define SPI_XFER_ONCE
` [U-Boot] [PATCH V2 4/6] lcd: add DataImage SCF0403x LCD panel support
` [U-Boot] [PATCH V2 5/6] omap3_dss: define DSS_ONOFF
` [U-Boot] [PATCH V2 6/6] cm_t35: use scf0403 driver
[U-Boot] [PATCH] ARM: mxs: Do not reconfigure FEC clock in FEC init
2013-10-16 14:06 UTC (5+ messages)
[U-Boot] [PATCH 0/2] Microblaze bug-fixes
2013-10-16 13:42 UTC (4+ messages)
` [U-Boot] [PATCH 1/2] common: fsl: Fix broken SPDX-License-Identifier change
` [U-Boot] [PATCH 2/2] microblaze: Fix watchdog initialization
[U-Boot] [PATCH] ARM: OMAP5: DDR3: Change io settings
2013-10-16 13:38 UTC (5+ messages)
[U-Boot] [PATCH V2] ARM: OMAP5: DDR3: Change io settings
2013-10-16 13:32 UTC
[U-Boot] [PATCH 0/4] USB: UMS: code refactoring and usage improvement
2013-10-16 13:21 UTC (5+ messages)
` [U-Boot] [PATCH 1/4] usb: ums: move ums code from trats to Samsung common directory
` [U-Boot] [PATCH 2/4] usb: ums: code refactoring to improve reusability at other boards
` [U-Boot] [PATCH 3/4] usb: ums: fix bug in partition capacity computation
` [U-Boot] [PATCH 4/4] usb: ums: add ums exit feature by ctrl+c or by detach usb cable
[U-Boot] Is EP88x board dead or not?
2013-10-16 9:55 UTC (3+ messages)
[U-Boot] [PATCH] mtd: fix warnings due to 64-bit partition support
2013-10-16 9:39 UTC (4+ messages)
` [U-Boot] "
[U-Boot] [RFC PATCH 1/2] usb: dfu: decrease dfu->r_left along with the transfer
2013-10-16 9:26 UTC (2+ messages)
` [U-Boot] [RFC PATCH 2/2] usb: dfu: correct dfu buffer inited value
[U-Boot] [PATCH 0/3] All M68K boards are broken
2013-10-16 9:14 UTC (8+ messages)
` [U-Boot] [PATCH 1/3] i2c: eliminate warnings in i2c_reloc_fixup function
` [U-Boot] [PATCH 2/3] m68k: eliminate warnings in do_bootm_linux function
` [U-Boot] [PATCH 3/3] m68k: eliminate a warning in cpu_init
[U-Boot] [PATCH v8 0/2] I2C: Zynq
2013-10-16 9:11 UTC (7+ messages)
` [U-Boot] [PATCH v8 1/2] I2C: Zynq: Support for 0-length register address
` [U-Boot] [PATCH v8 2/2] I2C: Zynq: Adapt this driver to the new model
[U-Boot] [RFC PATCH] usb: dfu: make nand upload working
2013-10-16 9:00 UTC (4+ messages)
[U-Boot] help on adding bootelf to u-boot
2013-10-16 8:42 UTC (3+ messages)
[U-Boot] [PATCH v2 1/2] serial: xuartlite: Staticize local functions
2013-10-16 6:56 UTC (5+ messages)
` [U-Boot] [PATCH v2 2/2] serial: s5p: "
[U-Boot] [PATCH v3 0/11] Support for the kmp204x reference design
2013-10-16 6:55 UTC (4+ messages)
` [U-Boot] [PATCH v3 11/11] mpc85xx: introduce the kmp204x reference design support
[U-Boot] u-boot-xlnx 'master-next' branch: usb not working for microzed
2013-10-16 6:35 UTC (4+ messages)
[U-Boot] [PATCH] powerpc/t1040: Update defines to support T1040SoC personalities
2013-10-16 5:21 UTC
[U-Boot] [PATCH 1/2] serial: xuartlite: Staticize local functions
2013-10-16 1:27 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] serial: s5p: "
[U-Boot] [PATCH] serial: mxs_auart: Staticize local functions
2013-10-16 0:51 UTC (3+ messages)
[U-Boot] [PATCH v2] Tegra114: Add support for more clock sources for T114 periphs
2013-10-15 22:54 UTC
[U-Boot] [PATCH] Tegra114: Add support for more clock sources for T1x4 periphs
2013-10-15 22:42 UTC (3+ messages)
[U-Boot] Preliminary schedule for U-Boot miniconf at ELCE2013
2013-10-15 21:59 UTC (14+ messages)
[U-Boot] Pull request: u-boot-spi/master
2013-10-15 21:25 UTC (2+ messages)
[U-Boot] [PATCH v2] Tegra114: SPL: Set SCLK source to CLK_M before PLLP init
2013-10-15 21:18 UTC
[U-Boot] pxe incompatibility with x86
2013-10-15 21:03 UTC (3+ messages)
[U-Boot] [PATCH] mmc: sdhci: Avoid commands errors by simple timeout adaptation
2013-10-15 20:18 UTC (3+ messages)
` [U-Boot] [PATCH v2] "
[U-Boot] [PATCH] Tegra114: spl: Set system clock to clk_m
2013-10-15 19:56 UTC (5+ messages)
No subject
2013-10-15 19:54 UTC
No subject
2013-10-15 19:54 UTC
No subject
2013-10-15 19:54 UTC
No subject
2013-10-15 19:54 UTC
No subject
2013-10-15 19:54 UTC
No subject
2013-10-15 19:54 UTC
No subject
2013-10-15 19:54 UTC
No subject
2013-10-15 19:54 UTC
No subject
2013-10-15 19:54 UTC
No subject
2013-10-15 19:54 UTC
No subject
2013-10-15 19:54 UTC
No subject
2013-10-15 19:54 UTC
[U-Boot] [PATCH v7 0/2] I2C: Zynq
2013-10-15 19:44 UTC (3+ messages)
` [U-Boot] [PATCH v7 1/2] I2C: Zynq: Support for 0-length register address
` [U-Boot] [PATCH v7 2/2] I2C: Zynq: Adapt this driver to the new model
[U-Boot] [PATCH v4 1/2] arm:goni: Update configuration for goni target
2013-10-15 19:23 UTC (4+ messages)
` [U-Boot] [PATCH v4 2/2] arm:goni:dfu Add support for DFU at GONI target
[U-Boot] declaring and initializing variables
2013-10-15 19:18 UTC (4+ messages)
[U-Boot] [PATCH v6 0/2] I2C: Zynq
2013-10-15 19:12 UTC (3+ messages)
` [U-Boot] [PATCH v6 1/2] I2C: Zynq: Support for 0-length register address
` [U-Boot] [PATCH v6 2/2] I2C:Zynq: Adapt this driver to the new model
[U-Boot] [PATCH v3] spi: mxc_spi: Fix double incrementing read pointer for unaligned buffers
2013-10-15 18:59 UTC (2+ messages)
[U-Boot] [PATCH v2 0/5] spi: cleanup set for v2013.10 rel
2013-10-15 18:59 UTC (2+ messages)
[U-Boot] [PATCH v5 0/2] I2C: Zynq
2013-10-15 18:29 UTC (3+ messages)
` [U-Boot] [PATCH v5 1/2] I2C: Zynq: Support for 0-length register address
` [U-Boot] [PATCH v5 2/2] I2C:Zynq: Adapt this driver to the new model
[U-Boot] [PATCH v2 0/11] Support for the kmp204x reference design
2013-10-15 18:21 UTC (3+ messages)
` [U-Boot] [PATCH v2 11/11] mpc85xx: introduce the kmp204x reference design support
[U-Boot] [RFC] ARM: U-boot and 2 GiB of ram with get_ram_size only being long
2013-10-15 18:01 UTC (5+ messages)
[U-Boot] [PATCH v4 0/2] I2C: Zynq
2013-10-15 17:59 UTC (3+ messages)
` [U-Boot] [PATCH v4 1/2] I2C: Zynq: Support for 0-length register address
` [U-Boot] [PATCH v4 2/2] I2C: Zynq: Adapt this driver to the new model
[U-Boot] [PATCH v3 0/2] I2C: Zynq
2013-10-15 17:44 UTC (3+ messages)
` [U-Boot] [PATCH v3 1/2] I2C: Zynq: Support for 0-length register address
` [U-Boot] [PATCH v3 2/2] I2C: Zynq: Adapt this driver to the new model
[U-Boot] [PATCH v2 0/4] MTD & UBI fixes
2013-10-15 17:27 UTC (3+ messages)
` [U-Boot] [PATCH 2/4] cmd_mtdparts: use 64 bits for flash size, partition size & offset
[U-Boot] [PATCH] I2C:Zynq: Adapt this driver to the new model
2013-10-15 17:19 UTC (4+ messages)
[U-Boot] [PATCH v2 0/2] I2C: Zynq
2013-10-15 17:18 UTC (3+ messages)
` [U-Boot] [PATCH v2 1/2] I2C: Zynq: Support for 0-length register address
` [U-Boot] [PATCH v2 2/2] I2C:Zynq: Adapt this driver to the new model
[U-Boot] [PATCH] disk:efi: avoid unaligned access on efi partition
2013-10-15 17:07 UTC (17+ messages)
[U-Boot] u-boot-xlnx/master-next: build error
2013-10-15 16:56 UTC (4+ messages)
[U-Boot] [PATCH] buildman: Use env to pick the python from $PATH
2013-10-15 12:45 UTC (4+ messages)
` [U-Boot] "
[U-Boot] [PATCH v4] config.mk: fix -fstack-usage support test
2013-10-15 12:11 UTC
[U-Boot] [PATCH v1] arm: remove unneeded symbol offsets and _TEXT_BASE
2013-10-15 12:04 UTC (6+ messages)
[U-Boot] [PATCH v3] config.mk: fix -fstack-usage support test
2013-10-15 11:29 UTC (4+ messages)
[U-Boot] [PATCH 00/10 V4] EXYNOS5420: Add SMDK5420 board support
2013-10-15 11:27 UTC (4+ messages)
` [U-Boot] [PATCH 10/10 V4] DWMMC: SMDK5420: Disable SMU for eMMC
[U-Boot] [PATCH 0/3] Add support for SPI based DataImage LCD panel
2013-10-15 11:09 UTC (6+ messages)
` [U-Boot] [PATCH 1/3] spi: omap3: add support for more word lengths
` [U-Boot] [PATCH 3/3] cm_t35: use scf0403 driver
[U-Boot] [PATCH] config.mk: enable -fstack-usage only when it is desired
2013-10-15 10:51 UTC (3+ messages)
[U-Boot] [PATCH] i2c: s3c24xx: add hsi2c controller support
2013-10-15 10:32 UTC (2+ messages)
` [U-Boot] [PATCH 3/3 v7] "
[U-Boot] [PATCH 2/4] exynos: i2c: Change FDT bus setup code to enumerate ports correctly
2013-10-15 10:32 UTC (2+ messages)
` [U-Boot] [PATCH 2/3 v4] "
[U-Boot] [PATCH 0/3] i2c: improve s3c24x0 with High-speed and new SYS_I2C framework support
2013-10-15 10:31 UTC (14+ messages)
` [U-Boot] [PATCH 1/3 v2] exynos: i2c: Fix i2c driver to handle NACKs properly
` [U-Boot] [PATCH 1/3 v4] "
` [U-Boot] [PATCH 1/3 v3] "
` [U-Boot] [PATCH 2/3 v3] exynos: i2c: Change FDT bus setup code to enumerate ports correctly
` [U-Boot] [PATCH 3/3 v6] i2c: s3c24xx: add hsi2c controller support
[U-Boot] [PATCH v2] config.mk: disable -fstack-usage for blackfin and m68k
2013-10-15 10:31 UTC (3+ messages)
[U-Boot] [U-boot] "-mno-unaligned-access" question
2013-10-15 8:30 UTC (2+ messages)
[U-Boot] fatls shows duplicated entries with long and short names
2013-10-15 7:26 UTC (6+ messages)
[U-Boot] [PATCH 0/6] [U-boot] SMDK5420: Add support for FIMD and DP
2013-10-15 6:35 UTC (15+ messages)
` [U-Boot] [PATCH 1/6] exynos_fb: Remove usage of static defines
` [U-Boot] [PATCH 2/6] arm: exynos: Add RPLL for Exynos5420
` [U-Boot] [PATCH 3/6] arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks "
` [U-Boot] [PATCH 4/6] video: exynos_fimd: Add framework to disable FIMD sysmmu
` [U-Boot] [PATCH 5/6] smdk5420: Implement callbacks needed by exynos_fb driver
` [U-Boot] [PATCH 6/6] CONFIG: SMDK5420: Enable FIMD and DP
[U-Boot] [PATCH v2] mxc_spi: bugfix for double incrementing read pointer on unaligned buffers in spi_xchg_single
2013-10-15 5:57 UTC (3+ messages)
[U-Boot] [PATCH] I2C:Zynq: Adapt this driver to the new model
2013-10-15 5:56 UTC (6+ messages)
[U-Boot] [PATCH 1/2] MMC: add sdhci generic framework
2013-10-15 4:54 UTC (5+ messages)
` [U-Boot] [PATCH V2 0/2] "
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox