messages from 2013-11-15 04:59:07 to 2013-11-19 08:24:15 UTC [more...]
[U-Boot] [PATCH] arm: omap3: Enable clocks for peripherals only if they are used
2013-11-19 8:24 UTC (2+ messages)
[U-Boot] [PATCH] cmd_test: fix a compile error on Blackfin
2013-11-19 7:50 UTC (4+ messages)
[U-Boot] sending data from ram to host machin in u-boot
2013-11-19 7:16 UTC (2+ messages)
[U-Boot] u-boot gerrit server
2013-11-19 7:12 UTC (33+ messages)
[U-Boot] [PATCH v2] include: define bool type in the same way as Linux
2013-11-19 7:06 UTC (2+ messages)
[PATCH] Blackfin: don't use 'bool' when it causes problems
2013-11-19 6:50 UTC
[U-Boot] [PATCH] include: define bool type in a more portable way
2013-11-19 6:14 UTC (9+ messages)
[U-Boot] [PATCH 0/2] Add usb eth support
2013-11-19 5:39 UTC (2+ messages)
[U-Boot] [PATCH v9 0/4] mtd: nand: omap: optimize OMAP NAND driver
2013-11-19 5:32 UTC (5+ messages)
` [U-Boot] [PATCH v9 1/4] mtd: nand: omap: optimize chip->ecc.hwctl() for H/W ECC schemes
` [U-Boot] [PATCH v9 2/4] mtd: nand: omap: optimize chip->ecc.calculate() "
` [U-Boot] [PATCH v9 3/4] mtd: nand: omap: optimized chip->ecc.correct() "
` [U-Boot] [PATCH v9 4/4] board/ti/am335x/README: update for NAND boot
[U-Boot] SPI and I2C EEPROM
2013-11-19 4:41 UTC (3+ messages)
[U-Boot] [PATCH v2 0/4] udoo: Move and optimize platform register setting
2013-11-19 4:34 UTC (8+ messages)
` [U-Boot] [PATCH v2 1/4] udoo: Add ethernet support (FEC + Micrel KSZ9031)
` [U-Boot] [PATCH v2 2/4] nitrogen6x: Move setup_sata to common part
` [U-Boot] [PATCH v2 3/4] udoo: Add SATA support on uDoo Board
` [U-Boot] [PATCH v2 4/4] udoo: Fix watchdog during kernel boot
[U-Boot] [PATCH V3 0/5] imx: Define common routines to set cpu and board environment variables
2013-11-19 3:40 UTC (11+ messages)
` [U-Boot] [PATCH V3 1/5] i.MX5x: define cpu_type() to return processor portion of cpu rev
` [U-Boot] [PATCH 2/5] imx: Define common routines to set cpu and board environment variables
` [U-Boot] [PATCH 3/5] i.MX6: nitrogen6x/sabrelite: override set_board_name()
` [U-Boot] [PATCH 4/5] i.MX6: nitrogen6x/sabrelite: initialize imx_type and board_name values
` [U-Boot] [PATCH 5/5] i.MX6: mx6*sabre*: "
[U-Boot] [PATCH 1/2 V2] powerpc/esdhc: Map register for eSDHC Host Controller V3.0
2013-11-19 0:31 UTC (7+ messages)
[U-Boot] [PATCH] arm: omap3: Add uart4 omap3 adddress
2013-11-18 22:54 UTC (6+ messages)
[U-Boot] [Patch v3 1/6] Driver/DDR: Moving Freescale DDR driver to a common driver
2013-11-18 20:58 UTC (12+ messages)
` [U-Boot] [Patch v3 2/6] Driver/DDR: combine ccsr_ddr for 83xx, 85xx and 86xx
` [U-Boot] [Patch v3 3/6] Driver/DDR: Add Freescale DDR driver for ARM
` [U-Boot] [Patch v3 4/6] powerpc/mpc8xxx: Extend DDR registers' fields
` [U-Boot] [Patch v3 5/6] Driver/DDR: Update DDR driver to allow non-zero base address
` [U-Boot] [Patch v3 6/6] Driver/IFC: Move Freescale IFC driver to a common driver
[U-Boot] [PATCH] am33xx: Stop modifying certain EMIF4D registers
2013-11-18 20:44 UTC (5+ messages)
[U-Boot] [PATCH 1/5] mx6sabre{auto, sd}: Change FDT loading address to avoid overlaping
2013-11-18 19:39 UTC (5+ messages)
[U-Boot] [PATCH] am335x_evm: Update nandboot to use partitions and DT
2013-11-18 15:36 UTC
[U-Boot] [PATCH] i.MX6: nitrogen6x: update memory configuration files to use macros
2013-11-18 14:21 UTC (5+ messages)
[U-Boot] Microblaze and Sparc boards are broken because of common timer func
2013-11-18 13:50 UTC (12+ messages)
[U-Boot] [PATCH v8 0/5] mtd: nand: omap: optimize and clean-up of OMAP NAND driver
2013-11-18 13:48 UTC (10+ messages)
[U-Boot] [PATCH v10 0/4] mtd: nand: omap: optimize and clean-up of OMAP NAND driver
2013-11-18 13:33 UTC (5+ messages)
` [U-Boot] [PATCH v10 1/4] mtd: nand: omap: make am33xx/elm.c as common driver for all OMAPx and AMxxxx platforms
` [U-Boot] [PATCH v10 2/4] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform
` [U-Boot] [PATCH v10 3/4] mtd: nand: omap: add CONFIG_NAND_OMAP_ECCSCHEME for selection of ecc-scheme
` [U-Boot] [PATCH v10 4/4] am335x: fix GPMC config for NAND and NOR SPL boot
[U-Boot] [PATCH] sparc: Correct arch/sparc/cpu/leon3/start.S from SPDX conversion
2013-11-18 13:31 UTC
[U-Boot] arm: U-Boot API - clang support broke ABI
2013-11-18 11:26 UTC
[U-Boot] [PATCH 0/2] i.MX6 (DQ/DLS): use macros for mux and pad declarations
2013-11-18 11:04 UTC (3+ messages)
` [U-Boot] [PATCH 1/2] "
[U-Boot] [PATCH] blackfin: soft-i2c: No need to define blackfin specific soft i2c operations
2013-11-18 11:02 UTC
[U-Boot] [PATCH 1/4] blackfin: i2c: Missing the patch to define GPIO I2C pins
2013-11-18 10:20 UTC (6+ messages)
` [U-Boot] [PATCH 2/4] blackfin: Use ADI_GPIO2 driver other than the default ADI_GPIO1
` [U-Boot] [PATCH 3/4] blackfin: If none ADI_GPIOX macro is defined, use ADI_GPIO1 as default
` [U-Boot] [PATCH 4/4] blackfin: Add missing macro CONFIG_BFIN_SERIAL
[U-Boot] [PATCH 1/4] SPI:rewrite the Freescale DSPI driver
2013-11-18 10:03 UTC (9+ messages)
` [U-Boot] [PATCH 2/4] arm:vf610:Enable the DSPI for Freescale vf610 platform
` [U-Boot] [PATCH 3/4] mtd:vf610twr:add Flash at26df081a for vf610twr platform
` [U-Boot] [PATCH 4/4] M68k:Update the DSPI interface based on the new DSPI driver
[U-Boot] [PATCH v2] arm926ejs, at91: add common phy_reset function
2013-11-18 9:27 UTC (4+ messages)
[U-Boot] [PATCH] common: Delete unnecessary rules
2013-11-18 7:24 UTC
[U-Boot] Many Blackfin boards are broken
2013-11-18 7:20 UTC (2+ messages)
[U-Boot] [PATCH 0/6] adapt s3c24x0 driver to new i2c framework
2013-11-18 7:19 UTC (5+ messages)
` [U-Boot] [PATCH 1/6] driver:i2c:s3c24x0: adapt driver to new i2c
[U-Boot] Some SuperH boards are broken
2013-11-18 5:19 UTC (3+ messages)
[U-Boot] [PATCH] drivers: delete unnecessary HOSTCFLAGS
2013-11-18 2:18 UTC
[U-Boot] [PATCH] Makefile: move some libraries to lib/Makefile
2013-11-18 2:17 UTC
[U-Boot] [PATCH] Makefile: descend into subdirectories only when CONFIG_API is defined
2013-11-18 2:08 UTC
[U-Boot] [PATCH] examples: delete unnecessary CPPFLAGS
2013-11-18 2:06 UTC
[U-Boot] [PATCH] board: tqm5200: delete its own object make rule
2013-11-18 1:39 UTC
[U-Boot] [PATCH] spieval: Remove remainders of dead board
2013-11-18 1:34 UTC
[U-Boot] [PATCH] post: remove unnecessary include path settings
2013-11-18 1:25 UTC
[U-Boot] [PATCH] board: h2200: Delete an unnecessary make rule
2013-11-18 0:44 UTC
[U-Boot] [GIT PULL] u-boot-mips/master
2013-11-17 19:17 UTC (2+ messages)
[U-Boot] [PATCH] board: Do not add -DCONFIG_SYS_TEXT_BASE in board config.mk
2013-11-17 19:17 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] examples: remove the remainders of dead board
2013-11-17 19:16 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] cosmetic: README.scrapyard: Add eNET board
2013-11-17 19:16 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] nios2: remove unnecessary header include path
2013-11-17 19:16 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH] board: cogent: include header files in a more natural way
2013-11-17 19:16 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH v2] configs: clean up unused macro CONFIG_L2_OFF
2013-11-17 19:16 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH 00/22] A collection of trivial Makefile refactoring
2013-11-17 19:16 UTC (2+ messages)
[U-Boot] pull-request: u-boot-mpc85xx/master
2013-11-17 19:16 UTC (2+ messages)
[U-Boot] [i2c] Pull request
2013-11-17 19:16 UTC (2+ messages)
[U-Boot] [PATCH] examples: add again x86 standalone example
2013-11-17 19:14 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH 2/2] vexpress: Add vexpress qemu variant
2013-11-17 15:17 UTC
[U-Boot] [PATCH 1/2] vexpress: use correct timer address on extended memory map systems
2013-11-17 15:17 UTC
[PATCH] vexpress: Enable some additional config options
2013-11-17 15:10 UTC
[U-Boot] [Patch v2 1/5] Driver/DDR: Moving Freescale DDR driver to a common driver
2013-11-16 16:52 UTC (7+ messages)
` [U-Boot] [Patch v2 2/5] Driver/DDR: Add Freescale DDR driver for ARM
` [U-Boot] [Patch v2 3/5] powerpc/mpc8xxx: Extend DDR registers' fields
` [U-Boot] [Patch v2 4/5] Driver/DDR: Update DDR driver to allow non-zero base address
` [U-Boot] [Patch v2 5/5] Driver/IFC: Move Freescale IFC driver to a common driver
[U-Boot] [PATCH V2] imx: Define common routines to set cpu and board environment variables
2013-11-16 16:16 UTC (8+ messages)
[U-Boot] [PATCH v2] mtd: move & update nand_ecclayout structure (plus tricorder change)
2013-11-16 0:00 UTC
[U-Boot] [PATCH v2] malta: use unmapped flash base address
2013-11-15 22:57 UTC (2+ messages)
[U-Boot] [PATCH v9 0/4] mtd: nand: omap: optimize and clean-up of OMAP NAND driver
2013-11-15 20:51 UTC (7+ messages)
` [U-Boot] [PATCH v9 1/4] mtd: nand: omap: make am33xx/elm.c as common driver for all OMAPx and AMxxxx platforms
` [U-Boot] [PATCH v9 2/4] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform
` [U-Boot] [PATCH v9 3/4] mtd: nand: omap: add CONFIG_NAND_OMAP_ECCSCHEME for selection of ecc-scheme
` [U-Boot] [PATCH v9 4/4] am335x: fix GPMC config for NAND and NOR SPL boot
[U-Boot] [PATCH] TI:omap: Update u-boot-spl.lds for i2c multibus/multiadapter update
2013-11-15 17:24 UTC
[U-Boot] [PATCH v1 1/4] udoo: Move and optimize platform register setting
2013-11-15 11:48 UTC (4+ messages)
` [U-Boot] [PATCH v1 2/4] udoo: Add ethernet support (FEC + Micrel KSZ9031)
[U-Boot] tr
2013-11-15 9:45 UTC (2+ messages)
[U-Boot] [PATCH 3/3] arm: omap3: Add SPL support to cm_t35
2013-11-15 7:51 UTC (2+ messages)
` [U-Boot] [PATCH v4] "
[U-Boot] [PATCH 0/2] env export fixes
2013-11-15 7:20 UTC (7+ messages)
` [U-Boot] [PATCH 1/2] hashtable: fix the export lenght computation
` [U-Boot] [PATCH 2/2] env export fix: compute the CRC on the real lenght of the exported variables
[U-Boot] [PATCH 0/9 v8] EXYNOS5420: Add SMDK5420 board support
2013-11-15 4:59 UTC (5+ messages)
` [U-Boot] [PATCH 6/9 v8] Exynos5420: Add base patch for SMDK5420
` [U-Boot] [PATCH 7/9 v8] DTS: Add dts support "
` [U-Boot] [PATCH 8/9 v8] Config: Add initial config "
` [U-Boot] [PATCH 9/9 v8] SPL: EXYNOS: Prepare for variable size SPL support
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox