messages from 2013-11-28 02:47:06 to 2013-12-01 21:49:04 UTC [more...]
[U-Boot] [PATCH v2] arm926ejs, at91: add common phy_reset function
2013-12-01 21:49 UTC (2+ messages)
` [U-Boot] [U-Boot,v2] "
[U-Boot] [PATCH v4 7/7] arm: atmel: sama5d3: spl boot from fat fs SD card
2013-12-01 21:48 UTC (2+ messages)
` [U-Boot] [U-Boot,v4,7/7] "
[U-Boot] [PATCH v4 6/7] arm: atmel: add ddr2 initialization function
2013-12-01 21:48 UTC (2+ messages)
` [U-Boot] [U-Boot,v4,6/7] "
[U-Boot] [PATCH v4 5/7] arm: atmel: sama5d3: early enable PIO peripherals
2013-12-01 21:48 UTC (2+ messages)
` [U-Boot] [U-Boot,v4,5/7] "
[U-Boot] [PATCH v4 4/7] arm: atmel: sama5d3: the offset of MULA is 18
2013-12-01 21:48 UTC (2+ messages)
` [U-Boot] [U-Boot,v4,4/7] "
[U-Boot] [PATCH v4 3/7] arm: atmel: sama5d3: correct the error define of DIV
2013-12-01 21:48 UTC (2+ messages)
` [U-Boot] [U-Boot,v4,3/7] "
[U-Boot] [PATCH v4 2/7] arm: at91: pm9261: remove undefined bit in mckr
2013-12-01 21:48 UTC (2+ messages)
` [U-Boot] [U-Boot,v4,2/7] "
[U-Boot] [PATCH v4 1/7] arm: atmel: sama5d3: correct the ID for DBGU and PIT
2013-12-01 21:47 UTC (2+ messages)
` [U-Boot] [U-Boot,v4,1/7] "
[U-Boot] [PATCH v2 0/4] Add dumpimage tool to extract files from U-Boot images
2013-12-01 19:43 UTC (5+ messages)
` [U-Boot] [PATCH v2 1/4] mkimage: added 'static' specifier to match function's prototype
` [U-Boot] [PATCH v2 2/4] tools: moved code common to all image tools to a separated module
` [U-Boot] [PATCH v2 3/4] Add dumpimage, a tool to extract data from U-Boot images
` [U-Boot] [PATCH v2 4/4] sandbox: dumpimage: Test dumpimage
[U-Boot] [RFC PATCH] kgdb: configs: remove obsolete CONFIG_KGDB_SER_INDEX
2013-12-01 18:07 UTC
[U-Boot] Pull request for u-boot-marvell.git
2013-12-01 16:00 UTC (14+ messages)
` [U-Boot] Pull request for u-boot-marvell.git - PLEASE HOLD ON
` [U-Boot] Pull request for u-boot-marvell.git - go ahead
[U-Boot] [PATCH] serial: lpc32xx: send CR before LF
2013-12-01 15:18 UTC (9+ messages)
[U-Boot] [PATCH V2] arm: omap3: Enable clocks for peripherals only if they are used
2013-12-01 11:21 UTC (2+ messages)
[U-Boot] [PATCH v2 0/9] Pending patches for merging
2013-11-30 21:54 UTC (16+ messages)
` [U-Boot] [PATCH v2 1/9] wandboard: add Future Eletronics 7" WVGA LCD extension board
` [U-Boot] [PATCH v2 2/9] wandboard: Use '0' as bootdelay but interruptable
` [U-Boot] [PATCH v2 3/9] wandboard: Pass 'quiet' bootparam by default
` [U-Boot] [PATCH v2 4/9] mx6sabresd: Add eMMC specific environment to allow U-Boot update
` [U-Boot] [PATCH v2 5/9] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro
` [U-Boot] [PATCH v2 6/9] mx28evk: Use 512k for fdt partition to align it
` [U-Boot] [PATCH v2 7/9] mx28evk: Add 'nandboot' environment command
` [U-Boot] [PATCH v2 8/9] mx28evk: Extend environment to easy write of NAND system
` [U-Boot] [PATCH v2 9/9] ARM: mx6: Change the FDT loading address to avoid overlaping
[U-Boot] [PATCH v15 00/10] arm64 patch
2013-11-30 18:44 UTC (11+ messages)
` [U-Boot] [PATCH v15 01/10] fdt_support: 64bit initrd start address support
` [U-Boot] [PATCH v15 02/10] cmd_pxe: remove compiling warnings
` [U-Boot] [PATCH v15 03/10] add weak entry definition
` [U-Boot] [PATCH v15 04/10] arm64: Add tool to statically apply RELA relocations
` [U-Boot] [PATCH v15 05/10] arm64: Turn u-boot.bin back into an ELF file after relocate-rela
` [U-Boot] [PATCH v15 06/10] arm64: Make checkarmreloc accept arm64 relocations
` [U-Boot] [PATCH v15 07/10] arm64: core support
[U-Boot] [PATCH 2/2] vexpress: Add vexpress qemu variant
2013-11-30 9:21 UTC (2+ messages)
[U-Boot] [PATCH] ARM/VExpress: fix timer address for TC2 and other VExpress models
2013-11-30 9:20 UTC (2+ messages)
[U-Boot] [PATCH 1/2] spi: bfin_spi: Remove unnecessary test for bus and pins[bus]
2013-11-30 3:40 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] spi: bfin_spi6xx: "
[U-Boot] How to write jffs2 image to spi nor flash?
2013-11-30 3:34 UTC (2+ messages)
[U-Boot] [PATCH 1/5] ARM: armv7: Make indirect vector addresses globl
2013-11-30 0:06 UTC (6+ messages)
` [U-Boot] [PATCH 5/5] ARM: mx6: Enable PCIe on Sabrelite
[U-Boot] toolchain problems when building iMX6 mx6qsabreauto (and another bootloader tool)
2013-11-29 22:28 UTC (6+ messages)
[U-Boot] Can a standalone application send data via Ethernet in U-Boot?
2013-11-29 22:27 UTC (6+ messages)
[U-Boot] [PATCH 1/1] MX6 SabreSD: Use readl() to read the CCM_CCGR3 register
2013-11-29 16:17 UTC (2+ messages)
[U-Boot] [PATCH] arm: omap3: i2c: don't zero cnt in i2c_write
2013-11-29 16:05 UTC (4+ messages)
` [U-Boot] [PATCH V2] arm: omap: "
[U-Boot] [PATCH v2 0/4] i2c: fti2c010: bug fix & new driver model
2013-11-29 15:04 UTC (8+ messages)
` [U-Boot] [PATCH v2 4/4] cmd_eeprom: bug fix for i2c read/write
[U-Boot] Compiling fw_printenv tool
2013-11-29 12:50 UTC (3+ messages)
[U-Boot] adding NAND support for omap4 (based on pandaboard)
2013-11-29 12:44 UTC (4+ messages)
[U-Boot] [PATCH v2] dwmmc: make driver usable for non-exynos platforms
2013-11-29 12:16 UTC (5+ messages)
[U-Boot] [PATCH] mmc: dw_mmc: remove the exynos specific code in dw-mmc.c
2013-11-29 12:01 UTC (4+ messages)
[U-Boot] [PATCH] arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)
2013-11-29 11:31 UTC (5+ messages)
` [U-Boot] [PATCH v2] "
[U-Boot] [RFC PATCH 0/3] at91: remove legacy gpio API
2013-11-29 11:13 UTC (6+ messages)
` [U-Boot] [PATCH 0/4] at91: remove legacy GPIO API (part 1)
` [U-Boot] [PATCH 1/4] at91: add new gpio pin definitions
` [U-Boot] [PATCH 2/4] at91: redefine legacy GPIO PIN_BASE
` [U-Boot] [PATCH 3/4] at91: nand: switch atmel_nand to generic GPIO API
` [U-Boot] [PATCH 4/4] at91: switch coloured LED to gpio API
[U-Boot] am3517: segmentation fault in Linux after upgrading from arago src to mainline u-boot
2013-11-29 11:09 UTC (4+ messages)
[U-Boot] [PATCH] am3517_evm: activate Ethernet PHY
2013-11-29 10:55 UTC
[U-Boot] [PATCH v7 0/13] Driver model implementation, tests, demo and GPIO
2013-11-29 10:47 UTC (16+ messages)
` [U-Boot] [PATCH v7 01/13] sandbox: Build a device tree file for sandbox
` [U-Boot] [PATCH v7 02/13] Add cmd_process_error() to report and process errors
` [U-Boot] [PATCH v7 03/13] dm: Add README for driver model
` [U-Boot] [PATCH v7 04/13] dm: Add base driver model support
` [U-Boot] [PATCH v7 05/13] sandbox: config: Enable driver model
` [U-Boot] [PATCH v7 06/13] dm: Set up driver model after relocation
` [U-Boot] [PATCH v7 07/13] dm: Add basic tests
` [U-Boot] [PATCH v7 08/13] dm: Add a 'dm' command for testing
` [U-Boot] [PATCH v7 09/13] dm: Add a demonstration/example driver
` [U-Boot] [PATCH v7 10/13] dm: Add GPIO support and tests
` [U-Boot] [PATCH v7 11/13] sandbox: Convert GPIOs to use driver model
` [U-Boot] [PATCH v7 12/13] dm: Enable gpio command to support "
` [U-Boot] [PATCH v7 13/13] dm: Remove old driver model documentation
[U-Boot] [PATCH] arm: atmel: eb_cpux9k2: config clean up
2013-11-29 10:35 UTC
[U-Boot] [PATCH] net/fman: add ft_fixup_xgec to support 3rd and 4th 10GEC
2013-11-29 10:34 UTC
[U-Boot] [PATCH] dwmmc: make driver usable for non-exynos platforms
2013-11-29 10:05 UTC (6+ messages)
[U-Boot] [PATCH RFC 0/7] Add support for WPJ344 board
2013-11-29 9:48 UTC (8+ messages)
` [U-Boot] [PATCH RFC 1/7] MIPS: AR7240: Address space declaration for SoC ar7240
` [U-Boot] [PATCH RFC 2/7] MIPS: AR7240: SPI drivers for ar7240
` [U-Boot] [PATCH RFC 3/7] MIPS: AR934x: Register Bitfields for SoC ar934x
` [U-Boot] [PATCH RFC 4/7] MIPS: AR7240: DRAM Initialization file
` [U-Boot] [PATCH RFC 5/7] WPJ344: Add support for WPJ344 board
` [U-Boot] [PATCH RFC 6/7] ATHEROS: AR934X: Add support for ar934x SoC
` [U-Boot] [PATCH RFC 7/7] NET: AR934x: Ethernet drivers for SoC AR934x
[U-Boot] [PATCH 0/2] blackfin: Do not generate unused files
2013-11-29 8:24 UTC (6+ messages)
` [U-Boot] [PATCH 1/2] blackfin: Do not generate unused header bootrom-asm-offsets.h
` [U-Boot] [PATCH 2/2] blackfin: Do not generate unused binary init.elf
[U-Boot] No single character output after update to latest u-boot on pandaboard
2013-11-29 8:18 UTC (11+ messages)
[U-Boot] [PATCH] Makefile: Do not create empty autoconf.mk on error
2013-11-29 8:14 UTC
[U-Boot] [PATCH] examples: add again x86 standalone example
2013-11-29 6:22 UTC (7+ messages)
` [U-Boot] "
[U-Boot] [PATCH] arm: New stack pointer is already aligned
2013-11-29 6:14 UTC (2+ messages)
[U-Boot] [PATCH] ARM: mx6: Remove the FDT loading address to avoid overlaping
2013-11-29 2:42 UTC (6+ messages)
[U-Boot] [PATCH] config: arm: exynos5250: remove duplicate defines
2013-11-29 0:54 UTC (2+ messages)
[U-Boot] [PATCH] Makefile: delete unnecessary lines
2013-11-29 0:43 UTC
[U-Boot] [PATCH 0/32] Add additional sandbox features and infrastructure
2013-11-29 0:37 UTC (3+ messages)
` [U-Boot] [PATCH 32/32] sandbox: Add LCD driver
[U-Boot] ralink RT3052 5X flash memory map
2013-11-28 15:28 UTC (2+ messages)
[U-Boot] OMAP3 i2c issues on IGEP, u-boot 2013.10
2013-11-28 13:06 UTC (11+ messages)
[U-Boot] [PATCH v4 0/1] nitrogen6x: Move setup_sata to common part
2013-11-28 11:32 UTC (2+ messages)
` [U-Boot] [PATCH v4 1/1] udoo: Add SATA support on uDoo Board
[U-Boot] [PATCH v3 0/1] nitrogen6x: Move setup_sata to common part
2013-11-28 11:18 UTC (5+ messages)
` [U-Boot] [PATCH v3 1/1] udoo: Add SATA support on uDoo Board
[U-Boot] Nand ECC layout
2013-11-28 10:56 UTC
[U-Boot] [ANN] v2014.01-rc1
2013-11-28 10:03 UTC (4+ messages)
[U-Boot] [PATCH] am335x: cpsw: optimize cpsw_recv to increase network performance
2013-11-28 9:55 UTC (2+ messages)
[U-Boot] [PATCH] board_f: explicitly disable console on early boot
2013-11-28 9:55 UTC (3+ messages)
[U-Boot] [PATCH v2 1/5] common/cmd_bootm.c: seperate do_bootm_vxworks related code from CONFIG_CMD_ELF
2013-11-28 9:51 UTC (6+ messages)
` [U-Boot] [PATCH v3 "
` [U-Boot] [PATCH v3 2/5] common/config_defaults.h: make CONFIG_BOOTM_VXWORKS default configuration
` [U-Boot] [PATCH v3 3/5] common/cmd_bootm: extend do_bootm_vxworks to support the new VxWorks boot interface
` [U-Boot] [PATCH v3 4/5] common/fdt_support.c: avoid unintended return from fdt_fixup_memory_banks()
` [U-Boot] [PATCH v3 5/5] README.vxworks: add a document describing the new VxWorks boot interface
[U-Boot] [PATCH] Makefile: delete unnecessary CPPFLAGS settings
2013-11-28 9:31 UTC
[U-Boot] [PATCH v2 0/4] udoo: Move and optimize platform register setting
2013-11-28 9:23 UTC (9+ messages)
` [U-Boot] [PATCH v2 1/4] udoo: Add ethernet support (FEC + Micrel KSZ9031)
` [U-Boot] [PATCH v2 2/4] nitrogen6x: Move setup_sata to common part
` [U-Boot] [PATCH v2 4/4] udoo: Fix watchdog during kernel boot
[U-Boot] [PATCH] trats: usb: Add usb_cable_connected() function
2013-11-28 9:16 UTC (2+ messages)
[U-Boot] [PATCH] s5p: gpio: change gpio coding method for s5p gpio
2013-11-28 9:16 UTC (2+ messages)
[U-Boot] [PATCH 1/2] arm: kzm9g: Fix undefined reference to `__aeabi_uldivmod' error
2013-11-28 8:52 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] arm: rmobile: Remove config.mk
[U-Boot] [PATCH 1/2] arm: kzm9g: Fix undefined reference to `__aeabi_uldivmod' error
2013-11-28 8:51 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] arm: rmobile: Remove config.mk
[U-Boot] [PATCH] arm: Remove unused !CONFIG_SPL_BUILD code in board_init_f()
2013-11-28 7:44 UTC (3+ messages)
[U-Boot] [PATCH] Makefile: Move some scripts imported from Linux
2013-11-28 7:29 UTC
[U-Boot] [PATCH] powerpc/corenet: CPC1 speculation disable
2013-11-28 6:58 UTC
[U-Boot] [PATCH] powerpc/t4240: Add a frequency setting case for fman1
2013-11-28 5:52 UTC
[U-Boot] [PATCH] powerpc/mpc85xx: Add support for single source clocking
2013-11-28 5:34 UTC
[U-Boot] [PATCH] T4240: Address T4240/T4160 Rev2.0 DDR clock change
2013-11-28 5:23 UTC
[U-Boot] [PATCH][v3] powerpc: mmc: Add corenet devices support in esdhc spl
2013-11-28 4:42 UTC
[U-Boot] [PATCH][v3] powerpc: spiflash:Add corenet devices support in eSPI SPL
2013-11-28 4:38 UTC
[U-Boot] [PATCH] drivers/mtd: descend into sub directories only when it is necessary
2013-11-28 3:22 UTC
[U-Boot] [PATCH] drivers/usb/gadget: select objects by obj-$(CONFIG-...)
2013-11-28 3:20 UTC
[U-Boot] [PATCH 0/2] More trivial refactoring of makefiles
2013-11-28 3:09 UTC (3+ messages)
` [U-Boot] [PATCH 1/2] post: descend only when CONFIG_HAS_POST is defined
` [U-Boot] [PATCH 2/2] Makefile: Select objects by CONFIG_ rather than $(ARCH) or $(CPU)
[U-Boot] [PATCH v7 00/11] arm: add Faraday A36x SoC platform support
2013-11-28 2:48 UTC (2+ messages)
` [U-Boot] [PATCH v8] nand: add Faraday FTNANDC021 NAND controller support
[U-Boot] [PATCH 0/2] i2c: fti2c010: migrate to new i2c model
2013-11-25 2:48 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox