messages from 2013-12-30 08:20:54 to 2014-01-04 07:14:41 UTC [more...]
[U-Boot] [PATCH 1/2] exynos5250: usb: Fix VBus gpio numbers for ehci and xhci controllers
2014-01-04 7:14 UTC (6+ messages)
` [U-Boot] [PATCH 2/2] smdk5250: Remove 'board_usb_vbus_init()' function
[U-Boot] Please pull u-boot-mpc85xx master
2014-01-03 23:57 UTC
[U-Boot] MAKEALL
2014-01-03 23:05 UTC
[U-Boot] [PATCH v4 1/3] mx6sabresd: Add eMMC specific environment to allow U-Boot update
2014-01-03 22:43 UTC (4+ messages)
` [U-Boot] [PATCH v4 2/3] wandboard: add Future Eletronics 7" WVGA LCD extension board
` [U-Boot] [PATCH v4 3/3] wandboard: Set default environment to use zImage
[U-Boot] [PATCH] powerpc/t208x: enable erratum a006379 for t208x
2014-01-03 21:04 UTC (3+ messages)
[U-Boot] [PATCH] powerpc/83xx: fix compilation error for MPC8315ERDB
2014-01-03 19:27 UTC (3+ messages)
[U-Boot] [PATCH v2 1/3] mx6: clock: Pass the frequency as argument of enable_fec_anatop_clock()
2014-01-03 17:55 UTC (3+ messages)
` [U-Boot] [PATCH v2 2/3] mx6: Add initial support for the Hummingboard solo
` [U-Boot] [PATCH v2 3/3] net: phy: atheros: Fix the masks for AR8031/8035
[U-Boot] [PATCH v3 0/8] Pending patches for merging
2014-01-03 17:47 UTC (19+ messages)
` [U-Boot] [PATCH v3 1/8] wandboard: add Future Eletronics 7" WVGA LCD extension board
` [U-Boot] [PATCH v3 2/8] mx6sabresd: Add eMMC specific environment to allow U-Boot update
` [U-Boot] [PATCH v3 3/8] imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macro
` [U-Boot] [PATCH v3 4/8] mx28evk: Use 512k for fdt partition to align it
` [U-Boot] [PATCH v3 5/8] mx28evk: Add 'nandboot' environment command
` [U-Boot] [PATCH v3 6/8] mx28evk: Extend environment to easy write of NAND system
` [U-Boot] [PATCH v3 7/8] ARM: mx6: Change the FDT loading address to avoid overlaping
` [U-Boot] [PATCH v3 8/8] ARM: mx6: Allow enablement of FEC Anatop based clock for all MX6
[U-Boot] Are mmc open/close subcommands needed?
2014-01-03 17:35 UTC (3+ messages)
[U-Boot] [PATCH 00/10] Introduce Samsung misc file and LCD menu
2014-01-03 17:31 UTC (17+ messages)
` [U-Boot] [PATCH v3 01/12] s5p: gpio: change gpio coding method for s5p gpio
` [U-Boot] [PATCH v3 02/12] trats2: Code cleanup
` [U-Boot] [PATCH v3 03/12] samsung: common: Add misc file and common function misc_init_r()
` [U-Boot] [PATCH v3 04/12] samsung: misc: move display logo function to misc.c file
` [U-Boot] [PATCH v3 05/12] common: lcd.c: fix data abort exception when try to access bmp header
` [U-Boot] [PATCH v3 06/12] lib: tizen: change Tizen logo with the new one
` [U-Boot] [PATCH v3 07/12] video: exynos: fimd: add support for various display color modes
` [U-Boot] [PATCH v3 08/12] samsung: boards: update display configs with 16bpp mode
` [U-Boot] [PATCH v3 09/12] samsung: misc: Add LCD download menu
` [U-Boot] [PATCH v3 10/12] Trats: add LCD download menu support
` [U-Boot] [PATCH v3 11/12] trats2: "
` [U-Boot] [PATCH v3 12/12] universal: "
[U-Boot] [PULL] : Please pull u-boot-imx
2014-01-03 14:51 UTC (2+ messages)
` [U-Boot] [PULL-Update] "
[U-Boot] [PATCH v4] arm: mx5: Add fuse supply enable in fsl_iim
2014-01-03 14:36 UTC (2+ messages)
[U-Boot] [PATCH 1/2] zynq: Do not explicitely enable icache
2014-01-03 14:21 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] zynq: Enable dcache support
[U-Boot] UBIFS seeing corrupt blank pages when image flashed via u-boot
2014-01-03 14:04 UTC (3+ messages)
[U-Boot] [PATCH v1 0/24] Zynq DT changes
2014-01-03 11:39 UTC (26+ messages)
` [U-Boot] [PATCH v1 01/24] net: emaclite: Fix OF initialization
` [U-Boot] [PATCH v1 02/24] net: gem: Add OF initialization support
` [U-Boot] [PATCH v1 03/24] mmc: zynq: "
` [U-Boot] [PATCH v1 04/24] zynq: Add OF ram "
` [U-Boot] [PATCH v1 05/24] gpio: zynq: Add dummy gpio routines
` [U-Boot] [PATCH v1 06/24] zynq: Enable CONFIG_FIT_VERBOSE
` [U-Boot] [PATCH v1 07/24] zynq: Enable Boot FreeBSD/vxWorks
` [U-Boot] [PATCH v1 08/24] zynq: Cleanup on miscellaneous configs
` [U-Boot] [PATCH v1 09/24] zynq: Cleanup on memory configs
` [U-Boot] [PATCH v1 10/24] zynq: Minor config cleanup
` [U-Boot] [PATCH v1 11/24] zynq: Enable cache options
` [U-Boot] [PATCH v1 12/24] zynq: serial: Simplify serial driver initialization
` [U-Boot] [PATCH v1 13/24] serial: zynq: Add OF initialization support
` [U-Boot] [PATCH v1 14/24] zynq: Add GEM0, GEM1 configs support
` [U-Boot] [PATCH v1 15/24] zynq-common: Define exact TEXT_BASE
` [U-Boot] [PATCH v1 16/24] zynq: Add Catalyst 24WC08 EEPROM config support
` [U-Boot] [PATCH v1 17/24] zynq-common: Define default environment
` [U-Boot] [PATCH v1 18/24] zynq-common: Change Env. Sector size to 128Kb
` [U-Boot] [PATCH v1 19/24] zynq-common: Define flash env. partition
` [U-Boot] [PATCH v1 20/24] zynq-common: Define CONFIG_ENV_OVERWRITE
` [U-Boot] [PATCH v1 21/24] zynq: Add support to find bootmode
` [U-Boot] [PATCH v1 22/24] dts: zynq: Add fdt support
` [U-Boot] [PATCH v1 23/24] zynq-common: Enable verified boot(RSA)
` [U-Boot] [PATCH v1 24/24] doc: zynq: Add information on zynq u-boot
[U-Boot] [PATCH 1/2] mx6: Add initial support for the Hummingboard solo
2014-01-03 11:24 UTC (6+ messages)
` [U-Boot] [PATCH 2/2] net: phy: atheros: Fix the masks for AR8031/8035
[U-Boot] [PATCH v4 19/29] zynq: Add zynq_zc770 xm012 board support
2014-01-03 11:10 UTC (4+ messages)
[U-Boot] [PATCH v1 1/2] i2c: zynq: Support for 0-length register address
2014-01-03 9:45 UTC (2+ messages)
` [U-Boot] [PATCH v1 2/2] i2c: zynq: Add support for the second i2c controller
[U-Boot] [PATCH 1/2] net: gem: Check if phy was correctly detected
2014-01-03 9:39 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] net: axi_emac: "
[U-Boot] [PATCH v2] powerpc/t2080qds: some update for t2080qds
2014-01-03 6:48 UTC
[U-Boot] [PATCH][v2] powerpc/83xx: Add support for get_svr() for 83xx devices
2014-01-03 6:41 UTC
[U-Boot] _POST_WORD_ADDR in post.h
2014-01-03 6:00 UTC
[U-Boot] [PATCH][v3] powerpc/t1040qds: Update DDR initialization related settings
2014-01-03 5:54 UTC
[U-Boot] please pull u-boot-samsung master
2014-01-03 5:30 UTC
[U-Boot] [PATCH v2 0/2] Add usb ethernet support for Arndale
2014-01-03 5:14 UTC (7+ messages)
` [U-Boot] [PATCH v2 1/2] usb: ehci: exynos: set/reset hsic phys
` [U-Boot] [PATCH v2 2/2] usb: exynos5: arndale: Add network support
[U-Boot] [PATCH V3 0/6] SMDK5420: Add S2MPS11 pmic support to SMDK5420
2014-01-03 1:11 UTC (8+ messages)
` [U-Boot] [PATCH V3 1/6] exynos: Use common pmic_reg_update() definition
` [U-Boot] [PATCH V3 2/6] power: Explicitly select pmic device's bus
[U-Boot] linkstation_HGLAN and MPC824x support
2014-01-03 0:39 UTC (5+ messages)
[U-Boot] [PATCH][v2] board/t1040qds: Enable memory reset control
2014-01-03 0:00 UTC (2+ messages)
[U-Boot] [PATCH] powerpc/b4860/pbl: fix rcw cfg
2014-01-02 23:59 UTC (2+ messages)
` [U-Boot] [u-boot-release] "
[U-Boot] [PATCH] powerpc/cms700: limit NAND data structure size
2014-01-02 23:55 UTC (3+ messages)
` [U-Boot] [u-boot-release] "
[U-Boot] [PATCH] powerpc/t4240: enable NAND boot support
2014-01-02 23:54 UTC (2+ messages)
` [U-Boot] [u-boot-release] "
[U-Boot] [PATCH] powerpc/t208x: fix macro CONFIG_SYS_FSL_NUM_USB_CTRLS
2014-01-02 23:49 UTC (2+ messages)
[U-Boot] [PATCH 1/2] powerpc/P1022DS: Define new nand_ecclayout structure macros
2014-01-02 23:48 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] powerpc/B4860QDS: "
[U-Boot] [PATCH][v4] powerpc/mpc85xx: Add support for single source clocking
2014-01-02 23:47 UTC (2+ messages)
[U-Boot] [PATCH][v2] board/freescale:Remove use of CONFIG_SPL_NAND_MINIMAL
2014-01-02 23:45 UTC (3+ messages)
[U-Boot] [PATCH] board/t1040qds: Relax IFC FPGA timings
2014-01-02 23:43 UTC (2+ messages)
[U-Boot] [PATCH] board/t1040qds: Fix typo in t1040_pbi.cfg file
2014-01-02 23:42 UTC (2+ messages)
[U-Boot] [PATCH][v2] powerpc/t1040qds: Update DDR initialization related settings
2014-01-02 22:07 UTC (2+ messages)
[U-Boot] [PATCH v2 2/2] powerpc/c29xpcie: 8k page size NAND boot support base on TPL/SPL
2014-01-02 22:01 UTC (3+ messages)
` [U-Boot] [PATCH v3 1/2] powerpc:mpc85xx: Add ifc nand boot support for TPL/SPL
[U-Boot] [PATCH v3] t2080qds/ddr: update ddr parameters
2014-01-02 21:58 UTC (2+ messages)
[U-Boot] [PATCH v3 1/2] doc: README.fuse: Add an example on how to use the fuse API on mx6q
2014-01-02 16:21 UTC (4+ messages)
` [U-Boot] [PATCH v3 2/2] mx6sabre_common.h: Add CONFIG_CMD_FUSE support
[U-Boot] [PATCH v2 1/6] mx6: soc: Staticize set_vddsoc()
2014-01-02 16:21 UTC (12+ messages)
` [U-Boot] [PATCH v2 2/6] mx6: soc: Clear the LDO ramp values up prior to setting the LDO voltages
` [U-Boot] [PATCH v2 3/6] mx6: soc: Set the VDDSOC at 1.175 V
` [U-Boot] [PATCH v2 4/6] mx6: soc: Introduce set_ldo_voltage()
` [U-Boot] [PATCH v2 5/6] mx6: soc: Add the required LDO ramp up delay
` [U-Boot] [PATCH v2 6/6] mx6: soc: Disable VDDPU regulator
[U-Boot] Interrupts in U-Boot
2014-01-02 14:18 UTC
[U-Boot] [PATCH v2 00/13] Introduce Samsung misc file and LCD menu
2014-01-02 8:09 UTC (21+ messages)
` [U-Boot] [PATCH v2 01/13] s5p: gpio: change gpio coding method for s5p gpio
` [U-Boot] [PATCH v2 02/13] trats: add optional cflags to board object file
` [U-Boot] [PATCH v2 04/13] samsung: common: Add misc file and common function misc_init_r()
` [U-Boot] [PATCH v2 06/13] common: makefile: Add optional cflags to object: common/lcd.o
` [U-Boot] [PATCH v2 07/13] lib: tizen: change Tizen logo with the new one
` [U-Boot] [PATCH v2 12/13] trats2: add LCD download menu support
[U-Boot] [PATCH V2 0/7] SMDK5420: Add support for FIMD and DP
2014-01-02 6:48 UTC (7+ messages)
` [U-Boot] [PATCH V2 5/7] smdk5420: Implement callbacks needed by exynos_fb driver
[U-Boot] [PATCH 0/4] Add support for TI TPS65090
2014-01-02 6:37 UTC (3+ messages)
` [U-Boot] [PATCH 1/4] power: Add support for TPS65090 PMU chip
[U-Boot] [PATCH V3 3/7] arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420
2014-01-02 5:39 UTC (2+ messages)
[U-Boot] [PATCH V2 7/7] CONFIG: SMDK5420: Enable FIMD and DP
2014-01-02 5:34 UTC (2+ messages)
[U-Boot] [PATCH v2] spi/cadence: Adding Cadence SPI driver support for SOCFPGA
2014-01-02 2:43 UTC
[U-Boot] Fwd: Re: [PATCH V2 1/7] exynos_fb: Remove usage of static defines
2014-01-02 0:40 UTC
[U-Boot] [PATCH 1/3] mtd: onenand: Fix unaligned access
2014-01-01 19:32 UTC (6+ messages)
[U-Boot] [PATCH] wandboard: Set default environment to use zImage
2014-01-01 5:46 UTC (4+ messages)
[U-Boot] [PATCH v2] wandboard: Set default environment to use zImage
2014-01-01 5:45 UTC
[U-Boot] [PATCH] arm: omap: cm_t35: enable gpio bank 5 clocks explicitly
2013-12-31 14:16 UTC (2+ messages)
[U-Boot] [PATCH 1/4] arm: lager: Add support QSPI device and enable boot from SPI flash
2013-12-31 12:56 UTC (3+ messages)
[U-Boot] [PULL] u-boot-onenand/master
2013-12-31 12:15 UTC
[U-Boot] Stack size
2013-12-31 8:41 UTC (9+ messages)
[U-Boot] [PATCH] board:trats1:trats2: fix adapter number
2013-12-31 7:44 UTC (2+ messages)
[U-Boot] [PATCH] board:trats2: fix default partitions and mmc env
2013-12-31 7:44 UTC (5+ messages)
` [U-Boot] [PATCH V2] "
[U-Boot] [PATCH 00/11 V13] EXYNOS5420: Add SMDK5420 board support
2013-12-31 7:34 UTC (2+ messages)
[U-Boot] [PATCH] lzma: fix buffer bound check error
2013-12-31 1:57 UTC
[U-Boot] sandbox question
2013-12-31 0:42 UTC (2+ messages)
[U-Boot] [PATCH v3] socfpga/dwmmc: Adding DesignWare MMC driver support for SOCFPGA
2013-12-31 0:26 UTC
[U-Boot] [PATCH v2] socfpga/dwmmc: Adding DesignWare MMC driver support for SOCFPGA
2013-12-31 0:25 UTC (5+ messages)
[U-Boot] post in uboot
2013-12-30 17:45 UTC (2+ messages)
[U-Boot] [PATCH] fuelgauge: max17042: fix i2c read issue which causes infinity loop
2013-12-30 10:31 UTC (3+ messages)
` [U-Boot] [PATCH v2] "
[U-Boot] [PATCH 00/11] arm: add Faraday A36x SoC platform support
2013-12-30 9:23 UTC (10+ messages)
` [U-Boot] [PATCH v8 0/8] "
` [U-Boot] [PATCH v8 1/8] arm: global_data: prepare for Faraday SoC support
` [U-Boot] [PATCH v8 2/8] arm: make mmu_enabled() a global function
` [U-Boot] [PATCH v8 3/8] arm: add Faraday ARM cores support
` [U-Boot] [PATCH v8 4/8] arm: faraday: revise the DMA API
` [U-Boot] [PATCH v8 5/8] arm: faraday: add FTPWMTMR010 timer support
` [U-Boot] [PATCH v8 6/8] arm: faraday: add FTTMR010 "
` [U-Boot] [PATCH v8 7/8] arm: faraday: add A360 SoC support
` [U-Boot] [PATCH v8 8/8] arm: faraday: add A369 "
[U-Boot] [PATCH] i2c: fti2c010: fix compiler warning on paddr[]
2013-12-30 9:20 UTC
[U-Boot] [PATCH 1/7 V5] mmc: Add some usefull macro definition
2013-12-30 8:20 UTC (6+ messages)
` [U-Boot] [PATCH 3/7 V5] mmc: Enhance erase handling procedure
` [U-Boot] [PATCH 4/7 V5] mmc: Update the handling of returned erase block
` [U-Boot] [PATCH 5/7 V5] mmc: Enhance mmcinfo command
` [U-Boot] [PATCH 6/7 V5] Powerpc/esdhc: Add esdhc host version define
` [U-Boot] [PATCH 7/7 V5] powerpc/esdhc: Update esdhc command execution process
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox